Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples     

Sandro Fadda 《Geostandards and Geoanalytical Research》2005,29(1):143-156

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.  相似文献   

Sorption of carbon dioxide–methane mixtures     

Grayna Ceglarska-Stefa&#x;ska  Katarzyna Zar&#x;bska 《International Journal of Coal Geology》2005,62(4):211-222

The paper reports the results of experiments concerning the sorption/desorption processes, observed under laboratory conditions, in two types of coal extracted from operational coal-mines in Poland, using CH₄ and CO₂ to observe their relative inter-reaction with the coal samples when introduced in varying proportions and conditions. Numerous studies concerning the sorption/desorption phenomena have described the operational mechanisms and the relationship of mine gases to the organically-created coal-body in mines. The differences in the behaviour of certain gases is twofold: firstly the essentially different characteristics of CO₂ and CH₄, and secondly the structure of the coal-bed itself: its degree of metamorphism and content of macerals. From the results yielded, it was observed that the divergence of the isotherms of sorption of CH₄ and other gases in comparison with the isotherms of sorption of CO₂ and a CO₂/CH₄ mixture differed and that the curve on the sorption isotherm was more clearly distinct after the introduction of CO₂ molecules to the system: coal with a higher degree of metamorphism—CH₄, which is closely related to the rigidity of the structure according to the level of metamorphism. Since coals with higher carbon content exhibit lower molecular bonding than low-carbonised coals, the characteristic feature of the bonds in the first case is their mobility. Knowledge of the physical and chemical properties of hard coals, as well as their interaction with mining gases, is of great use in solving problems concerned with the extraction of methane from mines or its storage in goafs.  相似文献   

Analysis of rock structure stability in coal mines   总被引：1，自引：0，他引：1  

Yi‐Shan Pan  Zhong‐Hua Li 《国际地质力学数值与分析法杂志》2005,29(10):1045-1063

In this paper, the theory of limit point instability is used to analyse the stability of rock structures in coal mines. A general method of analysing stability of rock structures is put forward and a uniform instability condition of rock structures is set up. Some instability phenomena, such as rock bursts in circular roadways, pillars and long walls, and the outburst of coal and gas from circular roadways, are discussed analytically. At a later stage, the critical point of rock structure instability is determined. The influence of relative parameters (such as the mechanical properties of rock, coal, and the geometric sizes) on the stability of the rock structures is carefully analysed. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Localization of mining-induced horizontal fractures along rock layer interfaces in overburden: field measurements and prediction   总被引：3，自引：0，他引：3  

V. Palchik 《Environmental Geology》2005,48(1):68-80

The locations of mining-induced horizontal fractures along rock interfaces in the overburden of Donetsk Coal Basin were identified using an original experimental device. The device traps methane from horizontal fracture zone (100–fold coal seam thickness) over an active longwall mining excavation. Presence or absence of horizontal fractures along rock layer interfaces is correlated with physical characteristics of the overburden, such as thickness, uniaxial compressive strength of overburden rock layers, location of rock layer interfaces and thickness of extracted coal seams. As a result, a combined criterion based on these physical characteristics is proposed to predict the presence of overburden horizontal fracturing in coal mine operations.  相似文献   

Erodibility of low‐compaction steep‐sloped reclaimed surface mine lands in the southern Appalachian region,USA          下载免费PDF全文

Siavash Hoomehr  John S. Schwartz  Daniel Yoder  Eric C. Drumm  Wesley Wright 《水文研究》2015,29(3):321-338

The use of loose spoils on steep slopes for surface coal mining reclamation sites has been promoted by the US Department of Interior, Office of Surface Mining for the establishment of native forest, as prescribed by the Forest Reclamation Approach (FRA). Although low‐compaction spoils improve tree survival and growth, erodibility on steep slopes was suspected to increase. This study quantified a combined K_C factor (combining the effects of the soil erodibility K factor and cover management C) for low compaction, steep‐sloped (>20°) reclaimed mine lands in the Appalachian region, USA. The combined K_C factor was used because standard Unit Plot conditions required to separate these factors, per Revised Universal Soil Loss Equation (RUSLE) experimental protocols, were not followed explicitly. Three active coal mining sites in the Appalachian region of East Tennessee, each containing four replicate field plots, were monitored for rainfall and sediment yields during a 14‐month period beginning June 2009. Average cumulative erosivity for the study sites during the monitoring period was measured as 5248.9 MJ·mm·ha^?1·h^?1. The K_C ranged between 0.001 and 0.05 t·ha·h·ha^?1·MJ^?1·mm^?1, with the highest values occurring immediately following reclamation site construction as rills developed (June – August 2009). The K_C for two study sites with about an 18–20 mm spoil D₈₄ were above 0.01 t·ha·h·ha^?1·MJ^?1·mm^?1 during rill development, and below 0.003 t·ha·h·ha^?1·MJ^?1·mm^?1 after August 2009 for the post‐rill development period. The K_C values for one site with a 40 mm spoil D₈₄ were never above 0.008 t·ha·h·ha^?1·MJ^?1·mm^?1 and also on average were lower, being more similar to the other two sites after the rill development period. Based on an initial K_C factor (K_e) measured during the first few storm events, the average C factor (C_e) was estimated as 0.58 for the rill development period and 0.13 for the post‐rill development period. It appears that larger size fractions of spoils influence K_C and C_e factors on low‐compaction steep slopes reclamation sites. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Concentration–discharge relationships in the coal mined region of the New River basin and Indian Fork sub‐basin,Tennessee, USA          下载免费PDF全文

J. C. Murphy  G. M. Hornberger  R. G. Liddle 《水文研究》2014,28(3):718-728

For many basins, identifying changes to water quality over time and understanding current hydrologic processes are hindered by fragmented and discontinuous water‐quality and hydrology data. In the coal mined region of the New River basin and Indian Fork sub‐basin, muted and pronounced changes, respectively, to concentration–discharge (C–Q) relationships were identified using linear regression on log‐transformed historical (1970s–1980s) and recent (2000s) water‐quality and streamflow data. Changes to C–Q relationships were related to coal mining histories and shifts in land use. Hysteresis plots of individual storms from 2007 (New River) and the fall of 2009 (Indian Fork) were used to understand current hydrologic processes in the basins. In the New River, storm magnitude was found to be closely related to the reversal of loop rotation in hysteresis plots; a peak‐flow threshold of 25 cubic meters per second (m³/s) segregates hysteresis patterns into clockwise and counterclockwise rotational groups. Small storms with peak flow less than 25 m³/s often resulted in dilution of constituent concentrations in headwater tributaries like Indian Fork and concentration of constituents downstream in the mainstem of the New River. Conceptual two or three component mixing models for the basins were used to infer the influence of water derived from spoil material on water quality. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

基于DInSAR技术与WorldView-2影像的煤矿塌陷区信息提取研究     

程玉书  郭凌飞  朱琳  张冉  李昕荷 《测绘与空间地理信息》2016,(7):91-93

结合DIn SAR与World View-2光学遥感解译技术,对研究区进行多源数据处理,提取研究地区的煤矿塌陷区信息,然后对处理后的两种结果进行对比。二者既有区别,又可以互补,最终在研究区形成完整的塌陷区信息。  相似文献   

采空区输气管道弹性变形分析     

魏威 《矿产与地质》2016,(5):833-836

近年来输气管道工程的大规模建设,其不可避免地要通过一些煤矿采空沉陷区和地质构造复杂区域。煤矿采空沉陷区的地表移动变形必然会使上覆的输气管道发生变形、甚至破坏,因此,分析与预测煤矿采空区地埋输气管道的安全性具有重要意义。本文以西气东输一线为例,依据弹性理论分析计算,当管道下伏分别为土体和岩体时,输气管道破坏时的岩土体垮塌宽度,并统计在垮塌影响范围一定的条件下,岩土体垮塌宽度与管道变形及最小曲率半径之间的规律。结果表明,管道的弯曲变形与垮塌宽度之间呈递增关系。  相似文献   

白杨河矿区煤层气丛式井钻井难点及对策研究          下载免费PDF全文

毛志新  谢相军  汤建江 《探矿工程》2016,43(12):37-40

新疆阜康市白杨河矿区煤层气开发利用先导性示范工程是新疆第一个煤层气示范工程项目。白杨河矿区总体构造为向南倾斜的单斜构造,地层倾角大,煤层多且间距大。该示范工程开发方案主要井型为丛式井。经过多年钻井实践,丛式井钻井技术在鄂尔多斯盆地东缘煤层气区块已经非常成熟,初步形成了一套适合该地区煤层气开发的丛式井钻井技术。由于白杨河矿区地质条件与鄂尔多斯盆地东缘各区块相比差异大,特别是存在地层倾角大、煤层多且间距大等地质特点,因此不能完全照搬原有的丛式井钻井技术。本文依据白杨河矿区地质资料,分析了白杨河矿区煤层气丛式井钻井难点,对解决该区块钻井难点的技术对策和攻关思路进行了总结与阐述,初步形成了一套适合白杨河矿区大倾角厚煤层的丛式井钻井技术。  相似文献   

山东济宁许厂煤矿下组煤瓦斯与二氧化碳开发利用前景及存在的问题          下载免费PDF全文

田立强  范士彦 《山东国土资源》2016,32(10)

许厂煤矿下组煤中蕴藏着较为丰富的瓦斯、二氧化碳资源。下组煤位于瓦斯风化带内,含瓦斯、二氧化碳和氮气等气体,瓦斯含量与埋藏深度呈正相关关系,主要存在低含量瓦斯、二氧化碳抽采率、二氧化碳资源化转换等技术方面的问题。从国家相关优惠政策、资源优势、煤与煤层气一体化开发技术、近水平长钻孔定向钻进技术、煤层压裂造缝技术、煤层注气增产技术和瓦斯、二氧化碳气体提纯技术等关键技术的发展程度,结合煤矿的下组煤层的开采方案,认为许厂煤矿有着较好的煤炭与瓦斯、二氧化碳一体化开发利用前景。  相似文献