既有建筑地基基础加固劈裂注浆法在青纸汽运办公楼的应用     

王高旺 《福建地质》2001,20(4):196-200

青纸汽运办公由于部分基础座落在松散的杂填土层上，产生不均匀沉降破坏，通过劈裂注浆加固，建筑物停止沉降，地基土承载力标准值提高了4倍，效果显著。加固劈裂注浆法是治理既有建筑地基基础沉降灾害的有效方法之一。  相似文献   

A research on grey numerical imitation and modeling of groundwater seepage system     

WU Qiang  DONG Donglin  WU Xiong  Ll Shuwen  Wang Yinao 《中国科学D辑(英文版)》2001,44(11):1043-1056

Based on grey set, grey numbers and their operation properties, the grey numerical model of groundwater seepage system was set up for the first time, the whole grey solving method of the model was given and it was proved that the common solving method of the model was only a special case of the grey solving methods. At the same time, the grey solving method was compared widely with common solving method, classical numerical method. The study shows that the grey solving method is better in depicting the procedure of transporting grey data of groundwater system. On the basis of the theoretical study, two basic kinds of cases about groundwater seepage were selected: the prediction of pit yield and the evaluation of groundwater resources on a groundwater basin. In the cases, systematical analyses were made for generalization and greylization of the hydrogeologic conditions, setting up of the grey model, identification and correction of the model as well as its prediction and evaluation. It was pointed out that when the grey numerical model is used to predict pit yield, the upper limit of the “grey band” of groundwater level cannot be higher than planed safe groundwater level, when evaluating the groundwater resource, the lower limit of the “grey band” of groundwater level cannot be lower than controlled level of groundwater.  相似文献   

钻孔压灌粉煤灰混凝土桩复合地基的应用研究     

李水清 《岩土力学》2001,22(4):519-521

通过工程实例，介绍了钻孔压灌粉煤灰混凝土桩的施工技术，说明了其施工工艺及特点，并利用6组静荷载试验成果，对粉煤灰混凝土桩复合地基的承载力特性进行了分析。  相似文献   

油罐地基不均匀沉降原因分析及纠偏加固处理方法     

张栋材 《水文地质工程地质》2001,28(5):69-72

某油罐因地基发生不均匀沉降而倾斜，本文通过对油罐发生均匀沉降的原因分析，提出了倾斜油罐纠偏设计及地基处理方案，叙述了地基处理及纠偏施工方法，施工处理后经过半年的使用观察，效果良好。  相似文献   

评定渗流管涌公式   总被引：7，自引：3，他引：7  

陆培炎 《岩土力学》2001,22(4):389-394

根据工程实际问题，推导了在江河堤围、深基坑开挖和矿山法地铁开挖三种情况下的评定渗流管涌公式，并指出应根据不同情况选用不同的评定渗流管涌公式，及使用中必须考虑的问题。  相似文献   

钻孔灌注桩后压浆技术机理的新认识   总被引：1，自引：0，他引：1       下载免费PDF全文

吴礼生  徐卫红  王爱平 《探矿工程》2001,(5):4-6

通过分析上海地区应用钻孔灌注桩后压浆技术的工程实例的试验结果，进一步认识后压浆技术提高钻孔灌注桩承载力的机理，在深入分析和总结的基础上，提出了合理应用后压浆技术的建议。  相似文献   

裂隙岩体渗流模型综述   总被引：19，自引：0，他引：19       下载免费PDF全文

王媛  速宝玉 《水科学进展》1996,7(3):276-282

系统综述了裂隙岩体渗流分析的各类模型,从各类模型所反映的渗透机理出发,阐明了它们的优缺点和适用条件及其工程应用情况。集等效连续介质模型和离散裂隙网络模型优点的等效-离散耦合模型是有实用前景的裂隙渗流模型。  相似文献   

植物栲胶作为护壁堵漏化学灌浆材料的初步研究   总被引：1，自引：0，他引：1  

肖文丁  葛学贵 《地质科技情报》1993,(4)

介绍了以植物栲胶为主剂、甲醛为固化剂的化学灌浆材料。对栲胶种类、胶凝反应机理、胶凝时间、浆液流变特征及固结性能的初步理论分析和实验研究表明:缩合型植物栲胶可在固化剂、交联剂和催化剂的作用下,于数秒钟至180分钟内形成热固性体型高分子凝胶,并且对岩土、砂石具有良好的浸润亲和性,完全可作为钻探护壁堵漏材料。  相似文献   

Hydrofracture mechanisms in rock during pressure grouting     

H. Y. Wong  I. W. Farmer 《Rock Mechanics and Rock Engineering》1973,5(1):21-41

Summary Hydrofracture Mechanisms in Rock During Pressure Grouting. The paper examines the basic meachnisms controlling the initiation of fractures in rocks and layered soils during pressure grouting, and their subsequent propagation into the ground mass. Previous analyses of fracture initiation have tended to concentrate on simplified models in which the ground is treated as an impervious elastic or Mohr-Coulomb continuum. The present method allows for the porous or fissured nature of the ground by considering the effect of seepage forces induced by the pore pressure gradient. The effect is quantified by use of a parameterN such that the ratio of fluid force used in expanding the injection hole, to that used in forcing fluid through void spaces, isN to (1—N).Analysis of hydrofracture propagation is based on stress analysis of a borehole in an elastic continuum, the propagating fracture zone around the borehole being represented as a non-elastic material governed by the Mohr-Coulomb failure criterion. This is supplemented by an energy approach which equates the energy supplied to the ground from the injection pump, with the energy stored in the ground and the energy necessary to fracture it.

---

Zusammenfassung Brucherscheinungen im Fels bei Verprearbeiten. In der Arbeit wird der grundlegende Mechanismus untersucht, welcher bei Verpreßarbeiten in Fels und geschichtetem Boden zur Einleitung und Ausbreitung von Brüchen führt. Frühere Untersuchungen des Bruchbeginns stützten sich im wesentlichen auf vereinfachte Modelle, in denen der Untergrund als undurchlässiges Kontinuum angesehen wird, das entweder elastisch ist oder der Mohr-Coulombschen Bruchbedingung genügt. Die neue Methode berücksichtigt dagegen eine Porosität oder Klüftung des Untergrundes durch Ansatz der vom strömenden Medium auf das Gebirge ausgeübten Belastung. Diese Belastung wird aufgeteilt in einen Druckverlust an der Bohrlochwand (gleich ParameterN mal Verpreßdruck) und die entsprechende, über den gesamten durchströmten Bereich verteilte Belastung.Die Untersuchung der Bruchausbreitung geht von der Spannungsermittlung um ein Bohrloch in einem elastischen Kontinuum aus, wobei in der sich ausbreitenden Bruchzone um das Bohrloch herum nichtelastisches Material angenommen wird, das dem Mohr-Coulombschen Bruchkriterium genügt. Zur Ergänzung dient eine Energie-Betrachtung, bei der die von der Injektionspumpe abgegebene Energie gleichgesetzt wird der im Untergrund gespeicherten Energie und der aufgewendeten Brucharbeit.

---

Résumé Les mécanismes de la fracturation hydraulique dans les roches pendant les injections sous pression. Le mémoire examine les mécanismes fondamentaux qui gouvernent l'initiation des ruptures dans les roches et les sols stratifiés, au cours des injections et leur propagation dans les massifs. Les analyses antérieures de l'initiation de la rupture, se sont concentrées sur des modèles simplifiés où l'on considérait la roche comme un milieu élastique et imperméable, ou comme un milieu de Mohr-Coulomb. La présente méthode admet que le massif est poreux ou fissuré, en considérant l'action des forces de percolation engendrées par le gradient de pression interstitielle. Cette action est quantifiée par un paramètreN, tel que le rapport de la force du liquide employée à dilater le forage d'injection, à celle employée pour forcer le coulis à travers les vides soitN/(1—N). L'analyse de la propagation des ruptures se base sur l'analyse des contraintes autour d'un forage dans un milieu élastique, alors que la zone de la rupture qui se propage autour du forage est représentée par un milieu non-élastique admettant le critère de rupture de Mohr-Coulomb. Cette analyse est complétée par une approche énergétique, où l'énergie qui est fournie au massif par la pompe d'injection est égalée à l'énergie emmagasinée dans la roche et à l'énergie de rupture.

---

Nomenclature A area of new cracks created per unit volume of time t - E total work done by injection fluid - E _i irrecoverable component of energy - E _{i c} work done in fracturing rock or soil - E _{i l} work done to overcome various frictional forces in grouting system - E _{i p} work done to cause plastic deformation of fractured zone - E _{i s} work done to overcome shear strength of fluid during flow - E _{i v} work done to overcome frictional drag between fluid and rock in soil surfaces during flow - E _r recoverable component of energy - E _{r f} elastic strain energy stored in fluid - E _{r s} elastic strain energy stored in rock or soil - h height of overburden - i j 1, 2, 3 - K ₀ coefficient of horizontal earth pressure - k permeability of ground to grout - L length of cylindrical grout source - n rock or soil porosity - p average fluid pressure between timet and (t + t) - p ₀ injection pressure - R radius of grout front - r radial distance from borehole axis - r ₀ radius of borehole - r ₁ radius of fractured zone - S specific surface area of rock or soil - S _T tensile strength of rock or soil - t time - u grout seepage velocity - V volume of grout injected - v volumetric strain - specific surface energy of rock - bulk density of rock or soil - _{i j} ^e elastic strain increment tensor - _{i j} plastic strain increment tensor - v Poisson's ratio - _{i j} average stress tensor in the ground during timet and (t + t) - _R , _T, _Z radial, tangential and vertical stresses induced by grouting - _r , _t , _z radial, tangential and vertical stress around borehole before grouting - grout shear strength - angle of internal friction of rock or soil With 7 Figures  相似文献   

岩溶坝区透水参数的随机模型   总被引：1，自引：0，他引：1  

张贵金  徐卫亚 《水文地质工程地质》2003,30(4):19-25

岩溶坝区的渗透特性受高应力场的作用,使其固有的非均质各向异性更趋复杂,采用确定性的方法不能准确的描述其本质特性。本文在对岩溶坝区透水性随机场进行分析的基础上,提出了渗透随机性的数学描述。考察岩溶坝区主要的两场作用,即渗流与应力场的耦合。基于Taylor随机有限元建立了渗流应力耦合的随机微分方程格式,并对耦合随机模型反演求解渗透参数提出了思路。  相似文献