冻融循环下含节理类岩石试样剪切破坏特性     

徐新木  张耀平  付玉华  雷大星  邹雄刚 《吉林大学学报(地球科学版)》2021,51(2):483-494

为探究冻融循环对节理岩石抗剪力学特性的影响,针对冻融循环前后不同连通率节理岩石试样进行剪切特性试验,探究了节理试样的剪切破坏机制,对比分析了冻融前后节理试样抗剪强度的衰减趋势,分析了黏聚力及内摩擦角随岩石试样剪切破坏面分形维数的变化规律。结果表明：随冻融循环次数的增加,节理试样剪切应力-位移曲线发生显著变化,峰值剪应力出现明显下降,黏聚力及内摩擦角对比冻融前试样出现明显劣化,并且随节理试样连通率的增加,劣化程度加剧;在节理连通率相同时,随冻融循环次数的增加,剪切破坏面的分形维数呈现近指数函数递增的趋势,随分形维数的增加,节理试样的黏聚力损伤因子、内摩擦损伤因子也呈现指数函数增加的趋势;在冻融循环次数相同时,内摩擦角损伤因子随节理连通率的增大呈先减小后增大的趋势,而黏聚力损伤因子在冻融循环次数为30次前后分别呈递增和先减后增的趋势。  相似文献   

中国东部夏季降水与气温的联合EOF分析     

郑金新  黎洛丝  郑嘉雯  郑菲菲 《广东气象》2019,41(2):9-14

采用JEOF等方法分析中国东部夏季降水和气温的协同变化时空分布特征,结果表明:当时间系数为正时,第1典型场降水型态从北向南(下同)呈"++-"分布,气温表现为冷异常,500 hPa回归场在中纬度地区呈显著低压异常,SST回归场表现为太平洋海域呈西北-东南的分布;第2典型场降水呈"+-"分布,气温则呈"-+"分布;第3典型场降水分布呈中间型,气温场呈"-+"分布。  相似文献   

Fractographic determination of joint length distribution in chalk     

Dov Bahat 《Rock Mechanics and Rock Engineering》1988,21(1):79-94

Summary Measurements of fracture joint distribution combined with determinations of plume length and orientation on a vertical section of a single chalk layer near Beer Sheva, Israel, reveal that joints marked by unilateral and circular plumes are skewed towards the shorter sizes while joints decorated by bilateral plumes are skewed towards the longer sizes. The mean lengths of the unilateral and bilateral joints are 66.5 cm and 155.6 cm, with standard deviations of 30 cm and 60.6 cm, respectively. These results as well as joint length observations from other areas seem to suggest a bimodal length distribution. However, since the minor maximum is generally very weak, and due to some additional uncertainties, further confirmation of the present observations is needed.  相似文献   

Shear resistance of jointed rock masses and stability calculation of rock slopes     

Xing Zhang 《Geotechnical and Geological Engineering》1993,11(2):107-124

Summary Based on an extension to a model originally proposed by Zhang (1990), a method for estimating the shear strength of a jointed rock mass containing two joint sets is developed. Compared to the original method in which only a single en-echelon joint set was considered, the new method has the following advantages: (1) it allows a much more realistic joint pattern to be incorporated; (2) the effects of joint connectivity and intersection angle between joint sets on shear strength are included. Use of the new method is demonstrated by application to the calculation of the stability of slopes in jointed rock. The importance of joint connectivity, joint persistence and joint set intersection angle on slope stability, as predicted by the model, is revealed.  相似文献   

Tomographic determination of 3-D crustal structure — Joint inversion of explosion and earthquake data     

Xian-Kang Zhang  Zhuo-Xin Yang  Yu-Chun Yang  Jian Yang  Jian-Li Song  Ping Zhao 《地震学报(英文版)》1995,8(4):519-529

In this paper, the theory and method, obtaining the tomographic determination of three-dimensional velocity structure of the crust by use of the joint inversion of explosion and earthquake data, are given. The velocity distribution of the crust is regarded as a continuous function of the spatial coordinates without parametrization of the velocity model ahead, so that the inversion solution would not be influenced by different parametrization procedures. The expressions of integration kernels, which relates the two kinds of data sets, are also given. The authors have processed the observed data in Tangshan earthquake region by the method proposed in this paper, and obtained the tomographic results of the middle and upper crust structures in this region. The comparison of these results with the result obtained only by the explosion data, has also been made.  相似文献   

海底X射线荧光探测系统的软件研制   总被引：2，自引：2，他引：0  

林玲  葛良全 《物探化探计算技术》2001,23(4):338-343

基于Windows98操作平台,结合软件工程的设计原则和面向对象的程序设计方法,用Visual Basic 6.0开发了海底X射线荧光探测系统软件（EDXRF^MS)。该软件能完成数据处理及运算,主要解决谱数据的采集与测量控制、成图和图形处理、X射线荧光谱分析、干扰因素的校正、仪器标定与含量计算等问题。EDXRF^MS软件与海底X射线荧光探测系统的硬件配合,能够进行海上现场多道数据的实时采集,对于海底矿产资源的开发具有一定的实用价值。  相似文献   

苏北地区大地电磁测深采集方法技术研究     

许建荣杨生  李爱勇 《江苏地质》2005,29(4):211-214

根据苏北地区大地电磁勘探环境特点进行了电极距长度、磁场位置和采集时长的试验工作，确定了大地电磁测深勘探技术参数设置下限，电极距长度不能小于50m，采集时间要大于8h，磁距应控制在2km范围内。  相似文献   

Centrifuge Modeling of Rock Slopes Susceptible to Block Toppling   总被引：2，自引：0，他引：2  

J. H. Zhang  Z. Y. Chen  X. G. Wang 《Rock Mechanics and Rock Engineering》2007,40(4):363-382

Summary This paper presents the results of centrifuge tests that were aimed at validating the Goodman-Bray method for rock slope toppling analysis. The Goodman-Bray method was extended by the authors to accommodate non-persistent basal planes of rock columns. Two gypsum column models, with and without anchors were used to represent the failure modes. Measured critical centrifuge accelerations were in agreement with the results obtained from numerical modeling. A background of the toppling slope failures associated with a large hydropower project in China instigated the need for the centrifuge study. The centrifuge model tests used an artificial rock. The observed failure mode did not follow a straight failure plane as proposed by Goodman and Bray. The failures revealed a bi-planar slip surface with a deep-seated portion near the toe of the slope. The outcomes of the centrifuge tests illustrated the need to search for the critical failure surface when performing a toppling analysis. The search technique is similar to that usually performed in a conventional sliding analysis.  相似文献   

Nonlinear aspects of energy dissipation in wood-panel joints     

Sara Casciati 《地震工程与工程振动(英文版)》2007,6(3):259-268

The joints connecting vertical and horizontal elements are the "weak link" in structural systems assembled from wood panels. If they are too weak, local failures may occur, resulting in performance that is significantly below expectations. If they are too resistant, the joints may be unable to dissipate energy during vibrations, thus possibly initiating a fast progressive failure. This paper re-processes and re-elaborates the results of shaking table tests previously carried out by the author and other co-workers. The goal is to assess the feasibility of a joint which is able to dissipate energy during vibration, without degrading the connection performance.  相似文献   

Nonlinear seismic response analysis of arch dam-foundation systems- part II opening and closing contact joints     

Xiuli Du  Jin Tu 《Bulletin of Earthquake Engineering》2007,5(1):121-133

A time-domain method for the analysis of arch dam-foundation rock dynamic interaction during earthquake was proposed, and the dynamic relaxation technique was adopted to obtain the initial static response for dynamic analysis by [Du et al. (2005). The paper has been contributed to Bulletin of earthquake engineering]. In this paper, a nonlinear explicit method in time domain considering the opening and closing effect of contact joints on arch dam during earthquake is further proposed by introducing the dynamic contact force model into the method. The simulation accuracy of dynamic contact force model is verified by comparing its calculation result and test result of scale model on shaking table. Finally, the influence of joints on the seismic response of Xiaowan arch dam is studied by the proposed method and some conclusions are given.  相似文献