Racism and Intolerance in Eastern Australia: a geographic perspective     

James Forrest  Kevin Dunn 《The Australian geographer》2006,37(2):167-186

Racism has become a fact of life in Australia over the past decade or so, yet there are relatively few studies of its nature or extent, and still fewer on its geography. Using a social constructivist approach, this study draws on a survey of 5056 respondents to investigate attitudes to racism and cultural diversity in New South Wales and Queensland, and of perceptions of out-groups as instances of ‘strangers in our midst’. On racism, results show the presence of a continuum of attitudes ranging from generally tolerant to generally intolerant, a presence which cuts across compositional (social or aspatial) characteristics to emphasise the existence of a distinctive geography, an everywhere different nature to racist and non-racist attitudes which transcends urban–rural and traditional social layers. On the other hand, perceptions of out-groups are not uniformly correlated with presence or absence of cultural diversity. In many cases, the ability to make judgements about significant ‘others’ or out-groups has been shown to relate more to abstract notions of self and national identity, reproduced in public by mainstream news media and political leaders. In particular, it may reflect an Anglo (or Anglo-Celtic) view on nationalism, which is a hallmark of the ‘new racism’: an assimilationist or ethnocultural view of Australian society which is different from the ‘civic nation’ ideal envisaged by multiculturalism. That the geography of attitudes and perceptions people have towards and about different cultural groups is so ‘everywhere different’ has important implications for attempts to address and redress issues of intolerance in Australia.  相似文献   

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study     

M. Quinta Ferreira  J. L. Velho 《Geotechnical and Geological Engineering》2006,24(1):101-116

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.  相似文献   

滑坡稳定性分析与安全系数取值研究   总被引：5，自引：0，他引：5  

徐青  陈士军  陈胜宏 《中国地质灾害与防治学报》2006,17(3):58-62

在地质灾害中,滑坡灾害分布最广、发生频率最高、危害最大,是我国地质灾害防治的主要对象。滑坡研究的主要任务之一是稳定性分析。论文针对三板溪水电站进水口滑坡和水布垭水电站大岩淌滑坡,分别采用刚体极限平衡法、块体单元法、有限单元法对稳定安全系数和条间推力分布曲线进行分析和比较,研究各种方法的差异和计算精度,以及各种方法稳定安全系数的取值标准,希望为水利水电工程边坡设计规范有关有限单元法、块体单元法条目的编写和相应的允许安全系数取值标准的制定提供一定的参考。研究结果表明:①块体单元法计算的安全系数与刚体极限平衡法计算的安全系数可以采用相同的取值标准,而有限单元法计算的安全系数取值标准可适当降低;②块体单元法计算的条间水平推力、条间剪切力与刚体极限平衡法(尤其是Sarma法)计算的条间水平推力、条间剪切力非常相近,有限单元法计算的条间水平推力、条间剪切力较小;③分析方法、力学模型与参数取值应与安全系数取值标准相匹配。  相似文献   

采矿引起的边坡倾倒滑移变形机理与变形安全性分析研究—以抚顺西露天矿边坡为例   总被引：1，自引：0，他引：1  

申力  纪玉石  刘大勇  祖国林  刘晶辉 《中国地质灾害与防治学报》2006,17(3):63-68

在矿山开发、水电建设过程中倾倒变形问题日渐突出。倾倒变形边坡一般具有反倾边坡结构,变形的过程和机理比较复杂、涉及的变形岩体范围较大、危害严重。论文以抚顺西露天矿边坡为例,通过岩体位移监测资料的跟踪分析、底面摩擦模拟试验,以岩体力学、松散介质力学原理为理论基础,探讨了采矿影响下边坡倾倒滑移体的变形机理,分析认为采矿引起的倾倒滑移变形问题是在特定的地质构造和采矿工程条件下产生的,并提出了岩体变形安全性分析方法。通过工程实例,验证了方法的实用性,并针对实际问题提出了变形整治对策。  相似文献   

小型水电站建设用地地质灾害评估技术研究——以湄尼多河小型水电站为例     

陈春华  李波 《中国地质灾害与防治学报》2006,17(3):133-136

现阶段,地质灾害评估技术人员在评估实践中,往往不注重各评估对象的差异性,采取同一评估模式,结果达不到评估的目的。在对小型水电站进行评估时,野外调查的重点,评估过程中所使用的方法以及危险性现状、预测及综合分区评估等与大型水电站、路线工程、矿山开采、民用建筑等工程有所不同。湄尼多河小型水电站工程位于云南省怒江州福贡县马吉乡境内,地质环境条件复杂,评估级别综合为二级。文章以该电站建设用地地质灾害危险性评估为例,对小型水电站建设用地地质灾害危险性评估的方法与理论进行探讨。  相似文献   

Construction techniques for the Taklamakan Desert Highway: research on the construction materials and the results of field tests   总被引：1，自引：0，他引：1  

Changning Jin  Zhibao Dong  Zhinong Li 《Environmental Geology》2006,49(6):915-922

After conducting many laboratory and field experiments, several key technical issues related to the construction of China’s Taklamakan Desert Highway have been satisfactorily resolved. In particular, considerable progress has been made on the dry compaction of a sand sub-base, road design parameters, the creation of a structure that combines a sub-grade and asphalt pavement, analysis of the stability of a sand sub-base strengthened with geotextiles, and on the development of a complete set of construction techniques. The achievements of this research were successfully applied for the first time in the Taklamakan Desert, where the environmental conditions are extremely harsh. The results suggest that the construction of this highway was economical and that the simple construction methods produced a reliable highway. The resulting highway is believed to be the world’s first long-distance graded highway running through a huge desert with migrating dunes.  相似文献   

基于全站仪的圆形建筑物倾斜观测的方法和精度   总被引：2，自引：0，他引：2  

焦明连 《四川测绘》2005,28(3):135-136,143

随着建筑物的不断增高、增大,其稳定性和可靠性成为人们关注的焦点.其中建筑物的倾斜度是衡量施工技术质量的重要指标之一.而传统的观测方法如经纬仪测小角法、经纬仪投点法,由于受仪器精度和观测条件的限制,观测精度较低.拓普康全站仪独具推出的圆柱偏心测量功能为快速、准确测定圆形建筑物的倾斜量开辟了一条新途径,本文阐述了基于全站仪的圆形建筑物倾斜观测的原理和方法,并对其精度进行分析.  相似文献   

煤矿井简检查孔施工技术探讨     

耿建国 《中国煤田地质》2005,17(1):39-40

介绍了煤矿井筒检查孔的特点和技术、质量要求,总结了以往工程中的经验教训,针对工程中的技术难点,如取心、孔斜控制、抽水作业和冲洗液选择与维护等影响质量、工期的关键环节提出了技术措施,为优质、高效施工此类工程提供借鉴.  相似文献   

加强工程施工项目管理措施与建议     

谭永强 《中国煤田地质》2005,17(5):131-132,138

结合项目施工管理的经验,从建立项目管理班子、项目评估和合同评审签订、人力资源的优化配置、强化劳务管理、责任成本管理、建立激励约束机制六个方面来探讨加强工程项目管理办法,并同时提出了加强工程项目管理的具体措施与建议.  相似文献   

南汽试车跑道精密施工测量     

陆锦标 《现代测绘》2005,28(2):23-25,28

介绍采用微型短边线形三角控制网、强制归心技术、独立前方交会成功的、高质量、高精度、高效益完成南汽试车跑道精密施工测量，希望能为类似工程测量提供一定的参考。(摘要修改)  相似文献