岩土钻掘设备的液压步履机构          下载免费PDF全文

王世玉  薛军 《探矿工程》2005,32(6):41-43

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。  相似文献   

小动力旋挖钻机用嵌岩短螺旋钻头结构形式的改进          下载免费PDF全文

刘南昌  胡继良  黄玉文  翁炜  张宏智 《探矿工程》2005,32(2):43-43,46

采用小动力无加压旋挖钻机在粒径较大的卵砾石地层和泥页岩地层中进行1500 mm以上大口径钻孔灌注桩施工，由于钻机动力小且不能加压，用常规嵌岩短螺旋钻头钻进出现进尺慢或不进尺现象。通过对河南西峡县宛西制药责任有限公司新厂房桩孔施工过程中出现此种现象的分析和处理，提出了嵌岩短螺旋钻头针对性的改进措施，并取得了良好效果。  相似文献   

新型充气钻井液在新疆严重漏失地层的应用          下载免费PDF全文

夏建国  乌效鸣  胡郁乐 《探矿工程》2005,32(9):46-48,51

利用特殊植物纤维KWS作为泥浆处理剂的新型充气钻井液，不仅具有常规充气钻井液低密度、排粉能力强、节约用水等优点，还可以不受钠、钙离子的影响，提高钻井泡沫稳定性和钻井液抗盐能力。通过采用此种新型充气钻井液，利用其低密度特性、特殊泥饼、泡沫的群体封堵作用和泡沫的疏水屏蔽作用，成功解决了裂隙地层的漏失问题，恢复了钻探生产。在我国西部干旱缺水漏失地区具有良好的应用前景。  相似文献   

液体高膨胀材料充填堵漏试验应用     

滕子军  赵善友 《探矿工程》2005,32(9):49-51

介绍了钻探施工中，利用膨胀材料充填、堵漏的新工艺，其具有经济、高效、安全的特点。  相似文献   

鄂北工区钻头型号及钻井参数的优化          下载免费PDF全文

李德红 《探矿工程》2005,32(8):50-54

通过对近年来鄂北工区所施工井的钻井资料进行分析、对比，优选出了适合于各区块、各井段的钻头型号和钻井参数，提高了机械钻速，缩短了钻井周期，使鄂北工区的钻井技术上了一个新的台阶，加速了鄂北气田的建设。  相似文献   

洛阳热电厂汽机主厂房2、3号机房爆破拆除技术          下载免费PDF全文

袁长征  张锦灵 《探矿工程》2005,32(7):58-60

绍了采用控制爆破拆除大跨度工业厂房的施工方法，主要论述了在要求振动较小情况下，怎样控制爆破参数。  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

EXPLORATION ENGINEERING     

《Abstract of Chinese Geological Literature》2014,(3)

正20141864 Deng Mengchun(Institute of Exploration Technology,CAGS,Chengdu 611734,China);Huang Shenghui Rock Sample Collection and Division Technologies for Air Reverse Circulation Sampling Drilling(Exploration Engineering,ISSN1672-7428,CN11-5063/TD,40(7),2013,p.73-76,80,16 illus.,5 refs.)  相似文献   

Flow processes and sedimentation in unidirectionally migrating deep‐water channels: From a three‐dimensional seismic perspective          下载免费PDF全文

Chenglin Gong  Yingmin Wang  Ronald J. Steel  Jeff Peakall  Xiaoming Zhao  Qiliang Sun 《Sedimentology》2016,63(3):645-661

Three‐dimensional seismic data were used to infer how bottom currents control unidirectional channel migration. Bottom currents flowing towards the steep bank would deflect the upper part of sediment gravity flows at an orientation of 1° to 11° to the steep bank, yielding a helical flow circulation consisting of a faster near‐surface flow towards the steep bank and a slower basal return flow towards the gentle bank. This helical flow model is evidenced by the occurrence of bigger, muddier (suggested by low‐amplitude seismic reflections) lateral accretion deposits and gentle channel wall with downlap terminations on the gentle bank and by smaller, sandier (indicated by high‐amplitude seismic reflectors) channel fills and steep channel walls with truncation terminations on the steep bank. This helical flow circulation promotes asymmetrical depositional patterns with dipping accretion sets restricted to the gentle bank, which restricts the development of sinuosity and yields unidirectional channel migration. These results aid in obtaining a complete picture of flow processes and sedimentation in submarine channels.  相似文献   

松辽盆地大陆科钻二开段大井眼钻井液技术     

郑文龙 《地质与勘探》2016,52(5):931-936

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。  相似文献