The mapping methods and division of tectonic units of the regional tectonic map in the eastern China seas and adjacent regions     

YIN Yanhong  ZHANG Xunhu  WEN Zhenhe  GUO Zhenxuan 《海洋学报(英文版)》2009,28(4):57-64

The geological-geophysical map series of the eastern China seas and adjacent region (1:1 000 000) will be published in the late half year of 2009. The regional tectonic map is one of the main professional maps. The Mapping methods, the division method of geological tectonic units and the main geological tectonic units are mainly discussed. The strata from Pliocene to Holocene are peeled off so as to display the Pre-Pliocene structures. In basins, isopaches are drawn for the Cenozoic deposits. The plate tectonic theory and present tectonic pattern are adopted as the priorities in tectonic division. As to the division of intraplate tectonic units, it is a revision, complement and improvement of previous dividing systems, and the nomenclature for each tectonic unit follows the current system in China. The first-order tectonic unit is plate (Pacific Plate, Eurasian Plate and Philippine Sea Plate). The second-order tectonic unit is tectonic domain (East Asian continental tectonic domain,East Asian continental margin tectonic domain and west Pacific tectonic domain). The Philippine Sea Plate and the west part of the Pacific Plate are called the West Pacific tectonic domain. The part of the Eurasian Plate involved in this study area can be further divided into East Asian continental tectonic domain and East Asian continental margin tectonic domain. The East Asian continental margin domain is composed of the Ryukyu island arc, the Okinawa Trough back-arc basin and the back-arc basin of Sea of Japan. The East Asian continental tectonic domain in this study area is composed of the Sino-Korea Massif, the Changjiang River (Yangtze) Massif and South China Massif. In turn, these massifs consist of basins, folded belts or uplift zones. The basins,the folded belts or the uplift zones are further divided into uplifts and depressions made up of sags and swells.  相似文献   

基于雷达反射率因子和雷电定位数据的深度学习雷电预报模型     

李健  王宇  刘泽  李哲  吴大伟  陶汉涛  张磊 《气象科技》2022,50(5):724-733

利用卷积神经网络和门控循环单元（Gated recurrent units ）神经网络,基于雷达反射率因子和雷电定位数据开展了雷电预报研究。首先构建了引用注意力机制的基于卷积神经网络和门控循环单元神经网络的深度学习模型（Attention ConvGRU）;然后将雷达反射率因子数据和对应时间段（6 min）的雷电定位数据处理成图像数据后输入深度学习模型,训练出可预报雷电的模型,包括3种模型：单雷电数据模型、单雷达数据模型和雷电〖CD*2〗雷达双数据模型;最后开展了预报试验和定量评估。综合评估表明,本文建立的雷电预报模型综合预报准确率达到96.74%,虚警率35.83%,关键成功指数（Critical Success Index, CSI）为0.2072。个例分析表明,预报模型对于具有明显移动趋势的雷暴过程（A类雷暴）的预报效果优于不具有明显移动趋势的雷暴过程（B类雷暴）,且随着B类雷暴强度减弱模型预报能力逐渐减弱。  相似文献   

利用GPU实现基于物理模型的流体运动仿真     

胡香  张威巍  周玉柱  刘芳 《测绘学院学报》2009,(3)

纳维-斯托克斯方程是描述流体运动的基础物理模型。首先简要介绍了在计算机上实现该模型的数值解算方法。在流体运动的计算机视觉仿真中,密度渲染才是最终结果,因此,又阐述了流体的密度场与速度场的关系,并且给出了流体仿真的基本流程。由于可编程图形处理器(GPU)具有并行性和速度快等特点,流体模拟的解算和渲染在图形处理器上运行更加高效,但是利用GPU编程实现流体仿真必须要实现3个核心转换,最后以支持3维纹理的Direct3D10为例,给出了利用GPU实现流体运动仿真两个简单实例。  相似文献   

青藏高原东南缘次林错岩体晚白垩世—早新生代快速剥蚀     

沈续文  沈晓明  刘静  曾令森  杨超群  葛玉魁  邢宇堃  曾宪阳  王子君  李云帅  李金阳 《地质学报》2022,96(10):3332-3344

青藏高原东南缘是研究构造、地貌演化和气候变化相互作用的理想场所,前人研究主要揭示了晚始新世—早中新世和晚中新世以来的快速剥蚀事件,缺乏晚白垩世—早新生代时期地貌演化过程的研究。次林错花岗岩已有的低温热年代学数据覆盖了整个新生代时期,为探索该区域新生代早期的剥露演化历史提供了重要资料。该岩体新生代早期冷却事件是岩浆冷却单一作用的结果,还是受快速剥蚀作用的影响,目前仍然存疑,需要定量研究。因此,本文结合已有的岩石地化和年代学数据,对次林错花岗岩开展了锆石饱和温度和一维岩浆冷却模拟研究。锆石饱和温度计算结果表明次林错花岗岩的岩浆结晶温度介于647～705℃之间,属低温花岗岩。一维岩浆冷却模拟结果显示岩体侵位时的最小围岩温度为160～120℃,对应深度约为3.7～5.0 km。结合锆石和磷灰石(U-Th)/He年代学数据,本文认为该岩体在晚白垩世—早新生代时期(67～40 Ma)经历了一期剥蚀量至少为2 km的快速剥蚀事件。已发表成果的综合分析表明,此次快速剥露事件可能是整个青藏高原地区广泛存在的构造剥蚀事件,新特提斯洋的俯冲闭合与印亚板块的初始碰撞可能是触发此次大规模区域剥蚀的主要原因。  相似文献   

A 3D discrete FEM iterative algorithm for solving the water pipe cooling problems of massive concrete structures          下载免费PDF全文

Jing Cheng  T. C. Li  Xiaoqing Liu  L. H. Zhao 《国际地质力学数值与分析法杂志》2016,40(4):487-508

Water pipe cooling has been widely used for the temperature control and crack prevention of massive concrete structures such as high dams. Because both under‐cooling and over‐cooling may reduce the efficiency of crack prevention, or even lead to great harm to structures, we need an accurate and robust numerical tool for the prediction of cooling effect. Here, a 3D discrete FEM Iterative Algorithm is introduced, which can simulate the concrete temperature gradient near the pipes, as well as the water temperature rising along the pipes. On the basis of the heat balance between water and concrete, the whole temperature field of the problem can be computed exactly within a few iteration steps. Providing the pipe meshing tool for building the FE model, this algorithm can take account of the water pipe distribution, the variation of water flow, water temperature, and other factors, while the traditional equivalent algorithm based on semi‐theoretical solutions can only solve problems with constant water flow and water temperature. The validation and convergence are proved by comparing the simulated results and analytical solutions of two standard second‐stage cooling problems. Then, a practical concrete block with different cooling schemes is analyzed and the influences of cooling factors are investigated. In the end, detailed guidance for pipe system optimization is provided. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Response of detrital zircon and monazite,and their U–Pb isotopic systems,to regional metamorphism and host‐rock partial melting,Cooma Complex,southeastern Australia     

I. S. Williams 《Australian Journal of Earth Sciences》2013,60(4):557-580

Progressive Early Silurian low‐pressure greenschist to granulite facies regional metamorphism of Ordovician flysch at Cooma, southeastern Australia, had different effects on detrital zircon and monazite and their U–Pb isotopic systems. Monazite began to dissolve at lower amphibolite facies, virtually disappearing by upper amphibolite facies, above which it began to regrow, becoming most coarsely grained in migmatite leucosome and the anatectic Cooma Granodiorite. Detrital monazite U–Pb ages survived through mid‐amphibolite facies, but not to higher grade. Monazite in the migmatite and granodiorite records only metamorphism and granite genesis at 432.8 ± 3.5 Ma. Detrital zircon was unaffected by metamorphism until the inception of partial melting, when platelets of new zircon precipitated in preferred orientations on the surface of the grains. These amalgamated to wholly enclose the grains in new growth, characterised by the development of {211} crystal faces, in the migmatite and granodiorite. New growth, although maximum in the leucosome, was best dated in the granodiorite at 435.2 ± 6.3 Ma. The combined best estimate for the age of metamorphism and granite genesis is 433.4 ± 3.1 Ma. Detrital zircon U–Pb ages were preserved unmodified throughout metamorphism and magma genesis and indicate derivation of the Cooma Granodiorite from Lower Palaeozoic source rocks with the same protolith as the Ordovician sediments, not Precambrian basement. Cooling of the metamorphic complex was relatively slow (average ～12°C/10⁶y from ～730 to ～170°C), more consistent with the unroofing of a regional thermal high than cooling of an igneous intrusion. The ages of detrital zircon and monazite from the Ordovician flysch (dominantly composite populations 600–500 Ma and 1.2–0.9 Ga old) indicate its derivation from a source remote from the Australian craton.  相似文献   

迁安紫苏花岗岩的~(40)Ar/~(39)Ar年龄谱   总被引：1，自引：1，他引：1  

桑海清  王松山  胡世玲  裘冀 《岩石学报》1988,4(4)

对采自河北省迁安县水厂地区的紫苏花岗岩中的黑云母和紫苏辉石进行了~(40)Ar/~(39)Ar年龄测定,分别给出了18.7亿年和19.6亿年的~(40)Ar保存年龄。这两种矿物的年龄谱的视年龄的梯度变化表明,紫苏花岗岩形成后是缓慢冷却的。3.9亿年左右的一次热事件,造成了放射成因~(40)Ar的丢失。根据热历史和封闭温度的研究,从27亿年(侵入到该区紫花岗岩中的花岗闪长岩的锆石U-Pb年龄)到19.6亿年,紫苏花岗岩岩体的抬升速率为6.5m/Ma,但从19.6亿年到18.7亿年,其抬升速率高达111m/Ma,具有明显的构造抬升作用。  相似文献   

Low-pressure granulite facies metamorphism in the Larsemann Hills area, East Antarctica; petrology and tectonic implications for the evolution of the Prydz Bay area   总被引：4，自引：0，他引：4  

K. STÜWE  R. POWELL 《Journal of Metamorphic Geology》1989,7(4):465-483

ABSTRACT Thermobarometric studies on various granulite facies areas along the Prydz Bay coast, East Antarctica (73°-79°E, 68°-70°S), show that, at around 1100 Ma, during a late Proterozoic orogeny, the rocks of the Larsemann Hills suffered a lower pressure metamorphic peak than the surrounding areas. Along the Prydz Bay coast, the rocks affected by this event include parts of the Vestfold Hills block plus all of the Rauer Group, the Larsemann Hills and the Munro Kerr Mountains. The dykes in the south-west corner of the Vestfold Hills were recrystallized during this event with little deformation at temperatures not quite as high as in the areas further south-west (650°C, 6.5 kbar) (Collerson et al., 1983), the Rauer Group was metamorphosed at 800°C and 7.5 kbar (Harley, 1987a), the Larsemann Hills at 750°C and 4.5 kbar, and the Munro Kerr Mountains probably at around 850°C and 5 kbar. Retrograde equilibration in the different areas occurred during decompression to about 10 km depth in all areas, followed by isobaric cooling at this depth. This paper shows that the peak metamorphism in the Larsemann Hills occurred at a pressure which is too low to have been the consequence of thermal relaxation of overthickened crust with normal mantle heat flow. Although other areas in Prydz Bay were metamorphosed at sufficiently high pressures so that their decompression paths are not inconsistent with a continental collision model, the inferred pre-metamorphic peak histories and the requirement of consistency with the Larsemann Hills, make it unlikely that collision followed by erosion-driven decompression is an appropriate model. We suggest that the thermal regime of the crust in the Larsemann Hills region was controlled by a perturbation in the asthenosphere, with magma invasion of the crust. We suggest that the 500 Ma event, represented in Prydz Bay by granitic outcrops at Landing Bluff and by several K/Ar ages from the Larsemann Hills area, was responsible for the final excavation of the terrane.  相似文献   

麻粒岩区构造地质编图原则探讨   总被引：2，自引：0，他引：2  

李江海 《地质科技情报》1994,13(4):13-20

麻粒岩区的边界及亚区划分标志常为等变线、断层或剪切带。主要地质单元包括灰色片麻岩、花岗片麻岩、混合岩、副变质表壳岩、层状侵入体、高级变质绿岩等，基性岩墙群为划分不同地质单元、建立其相对时序的重要标志。以上单元普遍被构造叠置，常可识别出侵入关系。表壳岩系底部不整合及地层层序的研究对于认识大陆克拉通化过程及沉积环境演化具有重要意义。早期大规模水平构造先后被两类变形序列叠加，第１类与麻粒岩相变质发生于同  相似文献   

非均匀温度场中熔体结晶作用与科马提岩结构成因     

谭劲  赵珊茸 《地质科技情报》1994,13(4):35-40

具有重要岩石学和构造学意义的科马提岩，最吸引人同时又最令人困惑的特征之一是它的鬣刺结构和分层构造。本文从喷出地表的岩桨冷凝时温度分布、熔体性质与结晶作用的密切联系，把科马提岩浆喷发形成的岩流作为一个冷凝整体。通过与金属铸锭浇注成形和矿石冶炼生产的比较，发现它们在冷凝固结过程中温度场特征、熔体的性质、结晶能力和结晶方式都有十分相似的特点，并以此为出发点详细解析了科马提岩的鬣刺结构和岩石分层构造的形成  相似文献