Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

基于EEMD和ARIMA的海温预测模型研究          下载免费PDF全文

张莹  谭艳春  彭发定  廖杏杰  余昱昕 《海洋学研究》2019,37(1):9-14

类型丰富、时空分辨率高的海洋探测数据,为信号分解和机器学习算法的应用提供了可能。本文针对如何建立有效的海温预测模型这一问题,使用高时空分辨率的海表温度(SST)融合产品,引入信号处理领域的集合经验模态分解(EEMD)和机器学习领域的自回归积分滑动平均模型(ARIMA)。首先利用最适于分解自然信号的EEMD方法,将海温数据分解成多个确定频率的序列;再利用ARIMA分别对各个频率的序列进行预测,最后将各个序列的预测结果进行组合。该方法在丰富数据的支撑下,比以往直接使用海温数据所建立的预测模型精度更高,为更好地进行海温预测提供了新方法。  相似文献   

EXPLORATION ENGINEERING     

《Abstract of Chinese Geological Literature》2014,(3)

正20141864 Deng Mengchun(Institute of Exploration Technology,CAGS,Chengdu 611734,China);Huang Shenghui Rock Sample Collection and Division Technologies for Air Reverse Circulation Sampling Drilling(Exploration Engineering,ISSN1672-7428,CN11-5063/TD,40(7),2013,p.73-76,80,16 illus.,5 refs.)  相似文献   

Building a model-based personalised recommendation approach for tourist attractions from geotagged social media data     

Xiaoyu Sun  Xia Peng  Yiran Chen  Yu Liu 《International Journal of Digital Earth》2019,12(6):661-678

When travelling, people are accustomed to taking and uploading photos on social media websites, which has led to the accumulation of huge numbers of geotagged photos. Combined with multisource information (e.g. weather, transportation, or textual information), these geotagged photos could help us in constructing user preference profiles at a high level of detail. Therefore, using these geotagged photos, we built a personalised recommendation system to provide attraction recommendations that match a user's preferences. Specifically, we retrieved a geotagged photo collection from the public API for Flickr (Flickr.com) and fetched a large amount of other contextual information to rebuild a user's travel history. We then created a model-based recommendation method with a two-stage architecture that consists of candidate generation (the matching process) and candidate ranking. In the matching process, we used a support vector machine model that was modified for multiclass classification to generate the candidate list. In addition, we used a gradient boosting regression tree to score each candidate and rerank the list. Finally, we evaluated our recommendation results with respect to accuracy and ranking ability. Compared with widely used memory-based methods, our proposed method performs significantly better in the cold-start situation and when mining ‘long-tail’ data.  相似文献   

网络大数据下的中国现代食甜习惯空间分布特征及其影响因素研究     

姚可桢  岳书平 《地球信息科学学报》2020,22(6):1202-1215

饮食地理文化作为地域文化中最具地方特色的重要元素,在现代人口大规模流动背景下呈现出全新的多样化局面,而基于传统认知的“南甜北咸”的地域分异已然不能代表中国现代食甜分布的空间特征。因此,本文采用网络爬虫技术,获取我国大陆31个省会城市共计约2000万条美食消费数据,从传统类菜品、主食类菜品、饮料类和甜品类菜品4个方面计算城市食甜度,在ArcGIS、MySQL软件支持下,借助GIS空间分析和数理统计方法探究我国现代食甜习惯的空间分布特征,分析影响食甜分布的因素。研究发现：① 中国食甜在空间分布上存在显著的地域分异特征,聚类分析评价参数R ²高达0.88,现代食甜习惯总体呈现“东高北中,西微内低”的包围式格局;② 从整体抑或局部角度,在1%显著性水平上莫兰指数均为正,中国食甜分布呈现显著的空间正相关关系,形成特色鲜明的3个地理集聚区,即以苏浙沪闽为主的东南沿海高甜集聚区,以渝黔川为主的西南内陆低甜集聚区和以陕宁为主的西北内陆低甜集聚区;③ 构建了中国现代食甜习惯分布影响因素模型,其拟合精度为0.82,分析结果显示降水、湿度、气温等气象要素及地理位置是影响现代我国食甜空间分布的重要因素。  相似文献   

基于机器学习的高精度高分辨率气象因子时空估计     

方颖  李连发 《地球信息科学学报》2019,21(6):799-813

气象变量常作为重要的影响因子出现在环境污染、疾病健康和农业等领域,而高分辨率的气象资料可作为众多研究的基础数据,对推进相关研究的发展意义重大。本文以中国大陆为研究区域,利用2015年824个气象站点的气温、相对湿度和风速3套数据,结合不同的解释变量组合,分别构建了各自的GAM和残差自编码器神经网络（简称残差网络）模型,以10倍交叉验证判断模型是否过拟合。研究结果表明：① GAM和残差网络方法都不存在过拟合问题,同GAM相比,残差网络显著提高了模型预测的精度（3个气象因素的交叉验证CV R²平均提高了0.21,CV RMSE平均降低了37%）,其中相对湿度模型的提升幅度最大（CV R²:0.85 vs. 0.52,CV RMSE:7.53% vs. 13.59%）;② 残差模型的结果较普通克里格插值结果和再分析资料更接近站点观测数据,表明残差网络可作为高分辨率气象数据研制的可靠方法。此外,研究还发现在相对湿度模型中加入臭氧浓度和气温、在风速模型中加入GLDAS风速再分析资料,可提升模型的性能。  相似文献   

Simulation of site-scale water fluxes in desert and natural oasis ecosystems of the arid region in Northwest China     

Mingjuan Xie  Geping Luo  Olaf Hellwich  Amaury Frankl  Wenqiang Zhang  Chunbo Chen  Chen Zhang  Philippe De Maeyer 《水文研究》2021,35(12):e14444

The study of water fluxes is important to better understand hydrological cycles in arid regions. Data-driven machine learning models have been recently applied to water flux simulation. Previous studies have built site-scale simulation models of water fluxes for individual sites separately, requiring a large amount of data from each site and significant computation time. For arid areas, there is no consensus as to the optimal model and variable selection method to simulate water fluxes. Using data from seven flux observation sites in the arid region of Northwest China, this study compared the performance of random forest (RF), support vector machine (SVM), back propagation neural network (BPNN), and multiple linear regression (MLR) models in simulating water fluxes. Additionally, the study investigated inter-annual and seasonal variation in water fluxes and the dominant drivers of this variation at different sites. A universal simulation model for water flux was built using the RF approach and key variables as determined by MLR, incorporating data from all sites. Model performance of the SVM algorithm (R² = 0.25–0.90) was slightly worse than that of the RF algorithm (R² = 0.41–0.91); the BPNN algorithm performed poorly in most cases (R² = 0.15–0.88). Similarly, the MLR results were limited and unreliable (R² = 0.00–0.66). Using the universal RF model, annual water fluxes were found to be much higher than the precipitation received at each site, and natural oases showed higher fluxes than desert ecosystems. Water fluxes were highest during the growing season (May–September) and lowest during the non-growing season (October–April). Furthermore, the dominant drivers of water flux variation were various among different sites, but the normalized difference vegetation index (NDVI), soil moisture and soil temperature were important at most sites. This study provides useful insights for simulating water fluxes in desert and oasis ecosystems, understanding patterns of variation and the underlying mechanisms. Besides, these results can make a contribution as the decision-making basis to the water management in desert and oasis ecosystems.  相似文献   

Site characterization model using least‐square support vector machine and relevance vector machine based on corrected SPT data (Nc)     

Pijush Samui  T. G. Sitharam 《国际地质力学数值与分析法杂志》2010,34(7):755-770

Statistical learning algorithms provide a viable framework for geotechnical engineering modeling. This paper describes two statistical learning algorithms applied for site characterization modeling based on standard penetration test (SPT) data. More than 2700 field SPT values (N) have been collected from 766 boreholes spread over an area of 220 sqkm area in Bangalore. To get N corrected value (N_c), N values have been corrected (N_c) for different parameters such as overburden stress, size of borehole, type of sampler, length of connecting rod, etc. In three‐dimensional site characterization model, the function N_c=N_c (X, Y, Z), where X, Y and Z are the coordinates of a point corresponding to N_c value, is to be approximated in which N_c value at any half‐space point in Bangalore can be determined. The first algorithm uses least‐square support vector machine (LSSVM), which is related to a ridge regression type of support vector machine. The second algorithm uses relevance vector machine (RVM), which combines the strengths of kernel‐based methods and Bayesian theory to establish the relationships between a set of input vectors and a desired output. The paper also presents the comparative study between the developed LSSVM and RVM model for site characterization. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

高分一号遥感影像地质灾害信息提取方法研究   总被引：1，自引：0，他引：1  

李启源  王明常  王凤艳  谭洋  卢立吉 《测绘与空间地理信息》2016,(2):17-20

山区地质灾害发生频繁,受灾范围大,危害严重。提取地质灾害信息、估算受灾情况,对救灾工作极为重要。传统的遥感人工解译方法速度慢、效率低;计算机自动解译速度快但解译精度受影像质量影响大,大范围地区很难建立起普适性的解译模型。本文利用洮南市西部高分一号遥感数据,结合DEM生成三维影像,建立解译标志,解译基础地质信息,分析地质灾害成因;根据研究区泥石流地质灾害的主要影像特征,提取影像的分类属性,基于面向对象的分类方法,建立信息提取模型,快速提取出地质灾害敏感区域;再进行人机交互,精确提取出地质灾害的类型和范围,通过野外验证,该方法十分可靠,为大范围地质灾害信息快速提取和灾后救援提供科学依据。  相似文献   

高光谱影像概率分类向量机分类方法研究     

薛志祥  余旭初  张鹏强  谭熊  魏祥坡 《测绘科学技术学报》2016,(4):426-430

从分析基于支持向量机和相关向量机的高光谱影像分类方法的优势和不足出发,将基于概率分类向量机的方法用于高光谱影像分类试验。在贝叶斯理论框架下,概率分类向量机为基函数权值引入截断Gauss先验概率分布,使得不同类别的基函数权值具有不同符号的先验分布,并利用EM算法进行参数推断,得到足够稀疏的概率模型,弥补了相关向量机选取错误类别的样本作为相关向量的不足,从而有效地提高了模型的分类精度和稳定性。OMIS和PHI影像分类试验表明,概率分类向量机能够很好地应用在高光谱影像分类。  相似文献