CQK-50型车载化钻机的研制          下载免费PDF全文

孙建华赵海涛  张阳明王德平刘秀美  张永勤 《探矿工程》2006,33(11):41-44

在分析研究小型地质车载钻机的形式、功能与特点的基础上，提出了钻机车载化的新思路。根据地质调查工作现状，结合国内现有小型地质取样钻机，研制了CQK-50型全液压多功能车载取样钻机，并在野外物化探遥感异常验证钻探中取得了良好效果。  相似文献   

我国地质找矿取心（样）钻探设备现状及提高效能的分析研究          下载免费PDF全文

张永勤 《探矿工程》2006,33(8):45-50

概述了我国地质找矿钻探市场现状及前景，分析研究了地质取样钻探传统的立轴钻机及全液压动力头钻机的优缺点及综合效能，针对国家提出加强地质工作的形势及中国的实际状况，提出了完善和改进我国现有钻探设备、提高我国地质找矿取样钻探效率、降低能耗及成本的观点及建议。  相似文献   

冲击凿岩钎杆的瞬态动力学分析          下载免费PDF全文

周晔  张国榉 《探矿工程》2006,33(9):46-48

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。  相似文献   

The log-normal distribution for hydraulic conductivity of compacted clays: Two or three parameters?     

Huaming Zhai  Craig H. Benson 《Geotechnical and Geological Engineering》2006,24(5):1149-1162

Risk and uncertainty assessments for waste containment systems employing clay barriers often include spatial variability in the hydraulic conductivity as part of the analysis. The two-parameter log-normal distribution is often used to describe the spatial variability, but for compacted clays the three-parameter form can be more appropriate. A statistical hypothesis test was developed that can be used to determine if the two- or three-parameter form of the log-normal distribution is more appropriate. The test is based on a likelihood ratio, comparing likelihood functions for the two- and three-parameter forms at their maximums. Likelihood functions are used assuming that a data set can be segregated into a set of distinct groups of hydraulic conductivities. A step-by-step calculation procedure is described and the test is applied to data collected from 45 sites.  相似文献   

The role of friction and secondary flaws on deflection and re-initiation of hydraulic fractures at orthogonal pre-existing fractures   总被引：1，自引：0，他引：1  

Xi Zhang  Robert G. Jeffrey 《Geophysical Journal International》2006,166(3):1454-1465

  相似文献   

PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用   总被引：2，自引：1，他引：2  

吴小建  李新民 《中国煤田地质》2006,18(1):64-65,68

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。  相似文献   

Evaluation of three waterborne polymers as stabilizers for sandy soil     

Abdullah Al-Khanbashi  Shihab W. Abdalla 《Geotechnical and Geological Engineering》2006,24(6):1603-1625

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.  相似文献   

Experimental research on a new encapsulated heat-generating hydraulic fracturing fluid system     

吴金桥  张宁生  吴新民  刘晓娟 《中国地球化学学报》2006,25(2):162-166

1 IntroductionFracturing plays an important role in increasingthe production and injection and enhancing the final re-covery of oil and gas. At present, the use of ahydroxypropyl guar gum, borate-crosslinked, hydraulicfracturing fluid systemhas become ext…  相似文献   

非等截面桩超声波成孔质量检测     

韩亮 《物探与化探》2005,29(2):185-188

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。  相似文献   

襄樊汉江四桥大口径灌注桩成孔施工实践     

李宏伟  侯杰董军 《中国煤田地质》2005,17(2):35-36,42

介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层，合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头，基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度，尾管长度，孔内空气流量与压力)，摸索与总结出一套复杂地层成孔施工经验。  相似文献