Strain softening of K0-consolidated Changi sand under plane-strain conditions     

D. Wanatowski  J. Chu 《Acta Geotechnica》2006,1(1):29-42

Experimental results are presented in this paper to study the strain softening behaviour of a marine dredged sand under plane-strain conditions. K₀ consolidated drained and undrained tests were conducted using a new plane-strain apparatus to characterize the strain softening behaviour of the sand under plane-strain conditions. For medium dense specimens, strain softening and shear bands were observed to occur under both drained and undrained conditions. For very loose specimens, no shear bands were observed and critical states were reached within the homogeneous deformation region in both drained and undrained tests. Strain softening was observed to occur at small strain for very loose specimens under undrained conditions. Two types of strain softening, the homogenous softening and banding softening, were identified and the conditions for strain softening were established. The results obtained from this study were compared with the studies by Han and Vardoulakis (Géotechnique 41(1):49–78, 1991), Finno et al. (J Geotech Eng ASCE 122(6):462–473, 1996, Géotechnique 47(1):149–165, 1997) and Mokni and Desrues (Mech Cohes-Frict Mat 4:419–441, 1998).  相似文献   

Assessment of Marine Clay Improvement Under Reclamation Fills by in-situ Testing Methods     

A. Arulrajah  H. Nikraz  M. W. Bo 《Geotechnical and Geological Engineering》2006,24(2):219-226

In ground improvement projects with prefabricated vertical drains, the duration of the preloading period is set in advance based on the predetermined time rate of consolidation of the compressible layer. If prediction is accurately done, the required degree of consolidation is met at the pre-determined preloading time. As such, there is a requirement for in-situ tests to be carried out just prior to the removal of surcharge to assess the degree of consolidation of the improved ground. In-situ tests were carried out after 23 months of surcharge loading at the In-Situ Test Site within the Changi East Reclamation Project in the Republic of Singapore. In-situ testing works in this research study comprises the use of field vane shear, piezocone, flat dilatometer and self-boring pressuremeter. The in-situ tests were carried out to determine the shear strength and degree of consolidation of the Singapore marine clay at Changi after 23 months of surcharge loading. The In-Situ Test Site consisted of a Vertical Drain Area as well as an untreated Control Area. Both areas were located adjacent to each other and were surcharged simultaneously to the same level and surcharge left in place for a period of 23 months. Comparison was made between the in-situ test results of the Vertical Drain Area and the untreated Control Area.  相似文献   

Experimental and numerical studies of rock salt strain hardening     

M. Hamami 《Geotechnical and Geological Engineering》2006,24(5):1271-1292

The work presented in this paper comes as part of a research program dealing with the thermomechanical behaviour of rock salt. It aims to study laboratory and in-situ long-term behaviour by means of creep tests with deviator and temperature changes. The laboratory results, using a triaxial multi-stages creep tests, highlighted the strain hardening character of rock salt. Furthermore, the in-situ results, using a borehole dilatometer multi-step creep test, have shown that the drilling is carried out in a weakly stressed pillar. The interpretation of the laboratory results, using the J.LEMAITRE law, did not indicate full agreement with all the test results. As a result a ‘double’ J.LEMAITRE model, which takes into account a double strain hardening variable, has been put forward. The validation of this model on the laboratory creep tests is very satisfactory. Furthermore, the activation energy seems satisfactory to represent the influence of the temperature. The in-situ behaviour modelling is clearly more complex than the modelization based on laboratory tests. In fact, it seems that if the rock salt behaviour is maintained by J.LEMAITRE law, it is necessary to vary with the stress, at least, one of the parameters assumed constant in the basic law.  相似文献   

用强度折减法和FLAC^3D计算边坡的安全系数   总被引：4，自引：0，他引：4  

李新坡陈永波  王永杰何思明 王成华 《山地学报》2006,24(B10):235-239

对采用强度折减法和FLAC^3D计算边坡的安全系数问题进行了研究。对边坡破坏的判断标准、边坡滑面位置的确定及计算参数对安全系数计算结果的影响进行了分析。结果表明，用FLAC计算时，边坡的破坏可以通过节点最大不平衡力突变、节点最大速度突变、特定点位移的不收敛等特征进行判断，同时边坡破坏的滑面也可以由速度等值线图等方法表示出来。另外，通过分析发现，弹性常数、剪胀角等参数对安全系数计算结果的影响不大。  相似文献   

Compressibility and shear strength of a residual soil     

Yahia E.-A. Mohamedzein  Mohammed H. Aboud 《Geotechnical and Geological Engineering》2006,24(5):1385-1401

A detailed study was performed to investigate the compressibility and the shear strength of a residual soil in Omdurman, Sudan. The soil resulted from weathering of sandstone and mudstone. The soil is classified as sandy clayey silt (MH-CH) and is generally partially saturated. Consolidation tests were performed to study the compressibility of the soil and UU, CIU and insitu tests (CPT and SPT) were performed to study the shear strength characteristics of the soil. The characteristics of this residual soil can generally be predicted using correlations proposed in the literature for transported soils. The soil is of low to medium compressibility and exhibits slight apparent overconsolidation behavior. The soil dilates during shear and shows no long term effective cohesion. Problems associated with open cuts in this soil are attributed to loss of strength upon saturation.  相似文献   

A Solution to the Problem of Predicting the Suitability of Silty–clayey Materials for Cement-stabilization     

Evangelos I. Stavridakis 《Geotechnical and Geological Engineering》2006,24(2):379-398

Major geotechnical problems in construction involving silty–clayey soils are due to their low strength, durability and high compressibility of soft soils, and the swell–shrink nature of the overconsolidated swelling soils. Confronted with these problems, a suitable ground improvement technique is needed, for deep excavations in soft clays, for stability, durability and deformation control. Cement-stabilization is one of the alternatives. An increase in strength and durability, reduction in deformability are the main aims of this method. Conventional cement-stabilization methods are used mainly for surface treatment. However, the use of cement has recently been extended to a greater depth in which cement columns were installed to act as a type of soil reinforcement (deep cement–soil mixing and cement jet grouting). In situ engineering properties of these silty–clayey soils are often variable and difficult to predict. For this reason cement-stabilization methods have a basic target to control the aforementioned engineering properties of these clays so that the properties of a silty–clayey soil become more like the properties of a soft rock such as clayey shale or lightly cemented sandstone. So cement-stabilization of these soils is essential to control their engineering properties and to predict their engineering behaviour for construction. In an effort to predict, classify and study the suitability of silty–clayey soils for cement-stabilization both slaking and unconfined compressive strength tests were carried out on clayey–sand mixtures consisted of two types of clays, kaolin and bentonite. Finally diagrams were prepared to study the variation of slaking and strength due to compaction, curing time and cement percentage and also to predict areas of efficient cement-stabilization.  相似文献   

岩石三轴强度试验   总被引：2，自引：0，他引：2  

李广平王玉玲  蔡玉贞 《岩矿测试》2005,24(1):75-78

通过自制岩石三轴压力室和配备液压泵与现有万能材料试验机组成岩石三轴试验系统，进行岩石三轴强度试验研究，并与其它方法比对，结果相近，满足了科研和生产的需要。  相似文献   

主砂体及其构造改造样式的盆地产铀远景评价判据     

陈祖伊  郭庆银  刘红旭 《铀矿地质》2005,21(3):152-160

本文在介绍并分析美国和前苏联总结的砂岩型铀矿区域评价判据的基础上, 引入当今碎屑岩沉积学和盆地地球动力学方面的若干新进展, 提出以主砂体及其随后经历的构造改造样式相结合的盆地产铀远景评价判据和以分析区域构造活动史和原型盆地演化相结合的盆地产铀远景评价模式。最后以潮水盆地为例, 具体分析了盆地各个时代盖层容存后生铀矿化的可能性, 指出盆地中的主要找矿目标层位和远景成矿地段。  相似文献   

单一滑面边坡的非稳定蠕变模型分析   总被引：3，自引：0，他引：3  

何峰  王来贵  刘向峰 《中国地质灾害与防治学报》2005,16(4):29-31

对单一滑面边坡的非稳定蠕变分析是边坡稳定性研究的基础。文中对岩质边坡单一滑面的流变变形机制进行了分析，提出了一种能较好反映这一变形机制的非稳定蠕变模型。特别是描述单一滑面边坡的非稳定蠕变破坏阶段，并对其稳定性进行了讨论。结合一些工程实例进行了对比验证，为滑坡灾害的预测和防治提供依据。  相似文献   

三类高强度悬式瓷绝缘子的成分和物相分析     

龚国洪  唐荣炳  尹祚莹  邓华兴  伍正平 《矿物岩石地球化学通报》2002,21(3):174-176

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。  相似文献