Quantifying flows along hydrological pathways by applying a new filtering algorithm in conjunction with master recession curve analysis          下载免费PDF全文

Ronan J. O'Brien  Bruce D. Misstear  Laurence W. Gill  Paul M. Johnston  Raymond Flynn 《水文研究》2014,28(26):6211-6221

Quantifying the proportion of the river hydrograph derived from the different hydrological pathways is essential for understanding the behaviour of a catchment. This paper describes a new approach using the output from master recession curve analysis to inform a new algorithm based on the Lyne and Hollick ‘one‐parameter’ signal analysis filtering algorithm. This approach was applied to six catchments (including two subcatchments of these) in Ireland. The conceptual model for each catchment consists of four main flow pathways: overland flow, interflow, shallow groundwater and deep groundwater. The results were compared with those of the master recession curve analysis, a recharge coefficient approach developed in Ireland and the semi‐distributed, lumped and deterministic hydrological model Nedbør‐Afstrømings‐Model. The new algorithm removes the ‘free variable’ aspect that is typically associated with filtering algorithms and provides a means of estimating the contribution of each pathway that is consistent with the results of hydrograph separation in catchments that are dominated by quick response pathways. These types of catchments are underlain by poorly productive aquifers that are not capable of providing large baseflows in the river. Such aquifers underlie over 73% of Ireland, ensuring that this new algorithm is applicable in the majority of catchments in Ireland and potentially in those catchments internationally that are strongly influenced by the quick‐responding hydrological pathways. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

基于长时间序列遥感数据的阿伯德尔国家公园 生态环境质量评价     

王法溧  何晓宇  方泽兴  魏显虎  叶虎平  施令飞 《地球信息科学学报》2019,21(9):1479-1479

阿伯德尔国家公园位于号称肯尼亚“水塔”的阿伯德尔山脉上,是肯尼亚重要的旅游景区和珍稀动植物保护区,开展该地生态环境质量评价对肯尼亚水资源保护与可持续发展具有重要的意义。本研究基于1987-2018年的Landsat系列遥感数据,通过计算综合遥感生态指数RSEI,结合趋势线分析法对阿伯德尔国家公园近32年间生态环境质量变化进行客观定量分析。研究结果显示：① 1987-2018年研究区RSEI均值从0.62下降到0.51,生态环境质量退化的区域面积为551.52 km ²,占总面积的71.85%,表明在气候变化和人类活动影响下,1987-2018年研究区的环境状况呈恶化趋势;②环境质量显著恶化的区域主要分布于亚高山植被区和东部低海拔森林覆盖区,亚高山地区植被生态系统结构单一,稳定性差,对气候变化和人类活动更为敏感;而东部区域存在过度开发,非法砍伐森林等现象,且旅游开发强度大,环境恶化与人类活动密切相关。  相似文献   

智能卡和出租车轨迹数据中蕴含城市人群活动模式的差异性分析     

郑晓琳  刘启亮  刘文凯  吴智慧 《地球信息科学学报》2020,22(6):1268-1281

当前采用交通流数据量化城市人群活动模式研究已经取得了丰硕的研究成果,但是对于同一区域、同一时段不同类型交通流数据反映城市人群活动模式的共性与差异性仍然知之甚少,直接影响了城市人群活动模式挖掘结果的可解释性与实际应用效果。为此,本文旨在对目前广泛采用的智能卡数据（公交和地铁刷卡）和出租车轨迹数据2种重要的交通流数据,从时空分布模式的差异性、行程距离及距离衰减效应的差异性、空间社团结构的差异性3个方面,探索二者反映城市人群活动模式的差异性：① 采用北京市六环以内区域2016年5月9日至15日的智能卡和出租车轨迹数据进行实验分析,研究发现：① 2种交通流反映出行需求的空间分布呈现出高度相关性,但是在同一空间单元上,2种交通流反映出行需求的时间相关性较低;② 2种交通流的使用率在不同空间位置存在明显差异,仅在城市中心区域使用率较为均衡;③ 2种交通流反映人群行程距离的空间分布、距离衰减效应存在明显差异,公共交通对于促进长距离出行更为重要;④ 从2种交通流发现的空间社团结构都显示了城市的多中心结构特征,但是二者发现社团结构存在的差异性表明两种交通方式对城市空间交互起着不同的作用。本研究有助于深入理解多源交通流反映城市人群活动的内在机理,提升城市人群活动模式在城市规划、交通管理等领域的应用效果。  相似文献   

渤海湾表层沉积物元素地球化学分布特征与影响因素     

张连杰  朱龙海  张盼  赵博  王鹏 《海洋科学》2019,43(6):78-87

对取自渤海湾的307个表层沉积物进行了元素测试和粒度分析。渤海湾表层沉积物的常微量元素呈现4种组合:富集于粗粒沉积区的SiO_2、Na_2O亲碎屑元素组合;富集于细粒沉积区的以Al_2O_3和重金属元素为代表的亲黏土元素组合;与缺氧环境有关的MnO、V、TOC元素组合和与河流输入有关的陆源CaO、TiO_2元素组合。粒度粗细主导了渤海湾元素含量分布的整体格局;海域河流物源供应不同较大影响了渤海湾南部(富Na_2O、CaO和SiO_2)和北部(富Ba和P_2O_5)在元素含量上的差异;高流速潮流对海底的冲刷再分配导致曹妃甸南侧Sr、Ca元素的条带状富集异常;有机质在细粒沉积区的富集导致缺氧环境的形成和K_2O、Mn、V、自生黄铁矿的海洋自生化学沉积;人类活动导致以Pb为代表的重金属污染在河流入海口、港口及沿岸海域的元素分布异常;曹妃甸沙坝内侧的泻湖(海洋钙质生物沉积)与沙坝外侧水下岸坡(陆源碎屑沉积)的截然不同的物源,导致了独特地貌沉积环境下元素分布的局部差异。  相似文献   

Stability analysis of tunnels driven in jointed rocks by means of a homogenized limit analysis approach     

Samir Maghous  José E. B. Winiawer  Vanessa F. Pasa Dutra 《国际地质力学数值与分析法杂志》2014,38(18):2009-2032

Conceived as a potential alternative to the classical design methods employed for analyzing the stability of underground structures driven in jointed rocks, the homogenization approach stems from the heuristic idea that, from a macroscopic point of view, a rock mass cut by a network of joints may be perceived as a homogenized continuum. The strength properties of the latter can be theoretically obtained from the failure conditions of its individual constituents: rock matrix and joint interfaces. At the material level, the limit analysis reasoning is used in the context of homogenization to formulate the homogenized strength criterion of a jointed rock mass in the particular situation of a single set of parallel joints. As it could be expected, the obtained closed‐form expressions show the strength anisotropy induced by joint preferential orientation. The support functions (π functions) associated with the homogenized strength criterion are also determined in both plane strain and three‐dimensional cases. This criterion is then applied to the investigation of stability analysis of a tunnel excavated in a jointed rock mass. Upper bounds estimated of the stability factor are derived from the implementation of the kinematic approach directly on the homogenized underground structure. Finally, the approach is applied to analyze and discuss the collapse of the Pinheiros subway station (São Paulo, Brazil). Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Three‐dimensional shakedown solutions for anisotropic cohesive‐frictional materials under moving surface loads     

Juan Wang  Hai‐Sui Yu 《国际地质力学数值与分析法杂志》2014,38(4):331-348

Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Snow model sensitivity analysis to understand spatial and temporal snow dynamics in a high‐elevation catchment          下载免费PDF全文

Michael Engel  Claudia Notarnicola  Stefano Endrizzi  Giacomo Bertoldi 《水文研究》2017,31(23):4151-4168

In this paper, we addressed a sensitivity analysis of the snow module of the GEOtop2.0 model at point and catchment scale in a small high‐elevation catchment in the Eastern Italian Alps (catchment size: 61 km²). Simulated snow depth and snow water equivalent at the point scale were compared with measured data at four locations from 2009 to 2013. At the catchment scale, simulated snow‐covered area (SCA) was compared with binary snow cover maps derived from moderate‐resolution imaging spectroradiometer (MODIS) and Landsat satellite imagery. Sensitivity analyses were used to assess the effect of different model parameterizations on model performance at both scales and the effect of different thresholds of simulated snow depth on the agreement with MODIS data. Our results at point scale indicated that modifying only the “snow correction factor” resulted in substantial improvements of the snow model and effectively compensated inaccurate winter precipitation by enhancing snow accumulation. SCA inaccuracies at catchment scale during accumulation and melt period were affected little by different snow depth thresholds when using calibrated winter precipitation from point scale. However, inaccuracies were strongly controlled by topographic characteristics and model parameterizations driving snow albedo (“snow ageing coefficient” and “extinction of snow albedo”) during accumulation and melt period. Although highest accuracies (overall accuracy = 1 in 86% of the catchment area) were observed during winter, lower accuracies (overall accuracy < 0.7) occurred during the early accumulation and melt period (in 29% and 23%, respectively), mostly present in areas with grassland and forest, slopes of 20–40°, areas exposed NW or areas with a topographic roughness index of ?0.25 to 0 m. These findings may give recommendations for defining more effective model parameterization strategies and guide future work, in which simulated and MODIS SCA may be combined to generate improved products for SCA monitoring in Alpine catchments.  相似文献   

Mechanical transitional behavior of binary mixtures via DEM: Effect of differences in contact-type friction coefficients     

《Computers and Geotechnics》2017

This report presents a numerical investigation of the shear behavior of binary mixtures via a two-dimensional discrete element method. The effect of the coarse particle content on the peak shear strength of mixtures is investigated for different contact-type friction coefficients. A detailed analysis on the anisotropies enables us to understand the microscopic mechanisms that result in the dependency of the peak shear strengths on the coarse particle content. The contributions of different contact types to the peak shear strength are quantified. Lastly, the inter-particles structures are examined when the binary mixtures become coarse-particle-supported structures.  相似文献   

The role of baseflow in dissolved solids delivery to streams in the Upper Colorado River Basin          下载免费PDF全文

Christine A. Rumsey  Matthew P. Miller  Gregory E. Schwarz  Robert M. Hirsch  David D. Susong 《水文研究》2017,31(26):4705-4718

Salinity has a major effect on water users in the Colorado River Basin, estimated to cause almost $300 million per year in economic damages. The Colorado River Basin Salinity Control Program implements and manages projects to reduce salinity loads, investing millions of dollars per year in irrigation upgrades, canal projects, and other mitigation strategies. To inform and improve mitigation efforts, there is a need to better understand sources of salinity to streams and how salinity has changed over time. This study explores salinity in the baseflow fraction of streamflow, assessing whether groundwater is a significant contributor of dissolved solids to streams in the Upper Colorado River Basin (UCRB). Chemical hydrograph separation was used to estimate baseflow discharge and baseflow dissolved solids loads at stream gages (n = 69) across the UCRB. On average, it is estimated that 89% of dissolved solids loads originate from the baseflow fraction of streamflow, indicating that subsurface transport processes play a dominant role in delivering dissolved solids to streams in the UCRB. A statistical trend analysis using weighted regressions on time, discharge, and season was used to evaluate changes in baseflow dissolved solids loads in streams (n = 27) from 1986 to 2011. Decreasing trends in baseflow dissolved solids loads were observed at 63% of streams. At the three most downstream sites, Green River at Green River, UT, Colorado River at Cisco, UT, and the San Juan River near Bluff, UT, baseflow dissolved solids loads decreased by a combined 823,000 metric tons (mT), which is approximately 69% of projected basin‐scale decreases in total dissolved solids loads as a result of salinity control efforts. Decreasing trends in baseflow dissolved solids loads suggest that salinity mitigation projects, landscape changes, and/or climate are reducing dissolved solids transported to streams through the subsurface. Notably, the pace and extent of decreases in baseflow dissolved solids loads declined during the most recent decade; average decreasing loads during the 2000s (28,200 mT) were only 54% of average decreasing loads in the 1990s (51,700 mT).  相似文献   

Dynamics of Saxothuringian subduction channel/wedge constrained by phase‐equilibria modelling and micro‐fabric analysis          下载免费PDF全文

S. Collett  P. Štípská  V. Kusbach  K. Schulmann  G. Marciniak 《Journal of Metamorphic Geology》2017,35(3):253-280

Subduction and exhumation dynamics can be investigated through analysis of metamorphic and deformational evolution of associated high‐grade rocks. The Erzgebirge anticline, which forms at the boundary between the Saxothuringian and Teplá‐Barrandian domains of the Bohemian Massif, provides a useful study area for these processes owing to the occurrence of numerous meta‐basites preserving eclogite facies assemblages, and coesite and diamond bearing quartzofeldspathic lithologies indicating subduction to deep mantle depths. The prograde and retrograde evolution of meta‐basite from the Czech portion of the Erzgebirge anticline has been constrained through a combination of thermodynamic modelling and conventional thermobarometry. Garnet growth zoning indicates that the rocks underwent burial and heating to peak conditions of 2.6 GPa and at least 615 °C. Initial exhumation occurred with concurrent cooling and decompression resulting in the growth of amphibole and zoisite poikiloblasts overgrowing and including the eclogite facies assemblage. The development of clinopyroxene–plagioclase–amphibole symplectites after omphacite and Al‐rich rims on matrix amphibole indicate later heating at the base of the lower crust. Omphacite microstructures, in particular grain size analysis and lattice‐preferred orientations, indicate that the prograde evolution was characterized by a constrictional strain geometry transitioning into plane strain and oblate fabrics during exhumation. The initial constrictional strain pattern is interpreted as being controlled by competing slab pull and crustal buoyancy forces leading to necking of the subducting slab. The transition to plane strain and flattening geometries represents transfer of material from the subducting lithosphere into a subduction channel, break‐off of the dense slab and rebound of the buoyant crustal material.  相似文献