一种新的储层孔隙成因类型--石英溶解型次生孔隙   总被引：26，自引：2，他引：26  

邱隆伟  姜在兴  陈文学  李晓红  熊志东 《沉积学报》2002,20(4):621-627

石英作为碎屑岩储层中的一种难溶组分,普遍认为它和次生孔隙的形成关系不十分密切。研究认为泌阳凹陷核桃园组储层中的碎屑石英颗粒存在明显的溶解现象,并形成以石英直接溶解型孔隙为主的储集空间特征。石英颗粒被溶解的部分在薄片中所占的范围为 2 %～ 7%者常见,高者达 8%以上,在总孔隙中所占的相对含量也多数在10 %～ 35 %之间,早成岩B期是其最主要形成期。石英溶解型次生孔隙的大量存在为碎屑岩储层中SiO₂ 胶结物及次生孔隙成因等问题的解释以及储层预测和评价提供了新的可能性。  相似文献   

25～75℃酸性NaCl溶液中方铅矿的溶解动力学   总被引：4，自引：0，他引：4  

张生  李建平  王玉荣  胡光黔 《地球化学》2002,31(6):587-592

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。  相似文献   

云南银(铅)-锌矿开发史料与找矿探讨   总被引：1，自引：0，他引：1  

薛步高  吴良士 《矿床地质》2002,21(3):298-303

云南是银铅锌矿开发较早的省份之一，史料丰富。本文从史料的角度，阐述了与云南古代有关银（铅）－锌矿的开发概况，基本特点以及如何保护，继承这份丰富的历史遗产，进而对目前有关史料的研究和古代采矿遗址清理情况进行分析，提出今后找矿的一些想法。  相似文献   

采矿环境地球化学研究   总被引：14，自引：2，他引：14  

余平 《矿产与地质》2002,16(6):360-363

阐述了采矿对环境造成的负面影响 ,包括 :尾矿或废石堆中的杂质元素会进入表生地球化学循环 ,在不同气候条件下 ,呈现不同的特征模式 ,尾矿氧化带的酸性水的排放 ;矿山污染源对周围土壤和植物的影响使重金属元素等进入食物链 ,对人类和动物健康造成威胁。根据国内外的最新研究动向 ,指出建立环境地球化学模式 ,对采矿环境污染作出客观的监测和评价 ,能为防止污染和治理环境提供可靠的地球化学依据。  相似文献   

动物体内青石棉纤维变化特征的显微研究   总被引：2，自引：0，他引：2  

董发勤  罗素琼  李国武 《矿物学报》2002,22(3):191-195

石棉纤维粉尘注入动物体内后，一部分形成石棉小体或石棉斑，一部分仍为裸露纤维。石棉小体内的纤维表面基团和组织内的某些蛋白反应可形成新的表面介体。粉尘在动物体内引起的动物病变主要是纤维化组织包裹和间皮瘤，机体以吞噬、包裹、缠绕，或以生化溶解方式排解粉尘。纤维自身则出现变短、尖部圆化、折断、分叉现象，也可以出现溶解、迁移、表面化学反应等。肺泡内纤维的碳酸盐化现象是体内纤维溶解和反应的新方式。动物体内间皮瘤可生长在注入部位也可在非注入部位，某种毒性衍生物质的生成和迁移是引起病变的主要原因。体内纤维粉尘的溶解是一个非常缓慢的过程，细小粉尘易于溶解和迁移。体内粉尘的膜阻滞现象在腹膜、胸膜上较为常见，在膜部位不易生成间皮瘤，肿瘤多引发在膜的内侧。但膜可以弱纤维化包裹。  相似文献   

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site     

Hartmut Kern  Zhenmin Jin  Shan Gao  Till Popp  Zhiqin Xu 《Tectonophysics》2002,354(3-4)

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.  相似文献   

Variation in element release rate from different mineral size fractions from the B horizon of a granitic podzol     

Mark E. Hodson 《Chemical Geology》2002,190(1-4):91-112

Far-from-equilibrium batch dissolution experiments were carried out on the 2000–500, 500–250, 250–53 and 53–2 μm size fractions of the mineral component of the B horizon of a granitic iron humus podzol after removal of organic matter and secondary precipitates. The different size fractions were mineralogically and chemically similar, the main minerals present being quartz, alkali and plagioclase feldspar, biotite and chlorite. Specific surface area increased with decreasing grain size. The measured element release rates decreased in the order 53–2>>>2000–500>500–250>250–53 μm. Surface area normalised element release rates from the 2000–500, 500–250 and 250–53 μm size fractions (0.6–77×10⁻¹⁴ mol/m²/s) were intermediate between literature reported surface area normalised dissolution rates for monomineralic powders of feldspar (0.1–0.01×10⁻¹⁴ mol/m²/s) and sheet silicates (100×10⁻¹⁴ mol/m²/s) dissolving under similar conditions. Element release rates from the 53–2 μm fraction (400–3000×10⁻¹⁴ mol/m²/s) were a factor of 4–30 larger than literature reported values for sheet silicates. The large element release rate of the 53–2 μm fraction means that, despite the small mass fraction of 53–2 μm sized particles present in the soil, dissolution of this fraction is the most important for element release into the soil. A theoretical model predicted similar (within a factor of <2) bulk element release rates for all the mineral powders if observed thicknesses of sheet silicate grains were used as input parameters. Decreasing element release rates with decreasing grain size were only predicted if the thickness of sheet silicates in the powders was held constant. A significantly larger release rate for the 53–2 μm fraction relative to the other size fractions was only predicted if either surface roughness was set several orders of magnitude higher for sheet silicates and several orders of magnitude lower for quartz and feldspars in the 53–2 μm fraction compared to the other size fractions or if the sheet silicate thickness input in the 53–2 μm fraction was set unrealistically low. It is therefore hypothesised that the reason for the unpredicted large release rate from the 52–3 μm size fraction is due to one or more of the following reasons: (1) the greater reactivity of the smaller particles due to surface free energy effects, (2) the lack of proportionality between the BET surface area used to normalise the release rates and the actual reactive surface area of the grains and, (3) the presence of traces quantities of reactive minerals which were undetected in the 53–2 μm fraction but were entirely absent in the coarser fractions.  相似文献   

交流变频调速CD-2B型岩心钻机的研制          下载免费PDF全文

宋振波  李建华  刘凡柏 《探矿工程》2002,(3):23-26

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。  相似文献   

挑战地球科学的新前沿 21世纪大洋综合钻探计划(OD21)          下载免费PDF全文

刘广志 《探矿工程》2002,(3):55-57

简要介绍即将实施的“21世纪大洋综合钻探计划”的目的、要求、设施等。  相似文献   

EXPERIMENTAL AND FIELD STUDY ON MINING-PIT MIGRATION   总被引：5，自引：0，他引：5  

S.Ali Akbar Salehi NEYSHABOURI  Ali FARHADZADEH  Ata AMINI 《国际泥沙研究》2002,17(4)

1 INTRODUCTION Because of the large quantity of sand and gravel in their beds, rivers have always been considered as a major source of sand and gravel for civil works. Acceptable quality, ease of extraction and economy are some of the reasons could be mentioned. Unfortunately, specific laws and regulations regarding the safe in-stream mining have not been provided for users and officials. What should be taken into account are the effects of over-mining of sand and gravel, which can cause …  相似文献