一种利用测井资料预测岩石可钻性的计算机方法          下载免费PDF全文

夏宏南  杨明合  谭家虎  戴俊  王小建 《探矿工程》2004,31(1):47-49

介绍了一种利用测井资料快速求得岩石可钻性级值的计算机方法。该方法能够比较准确地预测岩石可钻性，快速做出连续的地层可钻性剖面图。室内微钻头可钻性试验和江汉油田现场应用验证表明：该系统具有比较高的可靠性，是可以投入油田现场应用的。  相似文献   

HJ-1复合型钻井液的研究及应用          下载免费PDF全文

王政敏  牛振中  颜志华 《探矿工程》2004,31(5):48-50

分析和探讨了HJ-1复合型钻井液对复杂地层护壁的作用机理及护壁性能试验情况，介绍了其在寨上矿区复杂地层钻探中的成功应用。  相似文献   

Microcrack networks in granite affected by a fault zone: Visualization by confocal laser scanning microscopy     

Celia T. Onishi  Ichiko Shimizu   《Journal of Structural Geology》2005,27(12):170

Microcracks in the Cretaceous Ryoke-type granite in Japan were investigated by using deep drilling core samples collected in the Mizunami Underground Research Project of the Japan Nuclear Cycle Development Institute (JNC). The granite body suffered brittle deformation associated with Tertiary thrust movement. Based on core-scale and microscopic deformation features, the drill core from a depth of 300 to 700 m is divided into four domains, i.e. (A) undeformed granite, (B) granite intruded by cataclastic seams, (C) fractured granite in the fault damage zone, and (D) foliated cataclasite at the fault center. To characterize microcrack geometries in each domain, we employed the impregnation method using a low-viscous acrylic resin doped with fluorescent agents and captured the microcrack images by confocal laser scanning microscopy (CLSM). The CLSM image in the fault damage zone revealed anisotropic development of microcrack networks related to the fault movement. Both CLSM observation and porosity measurements reveal a drastic increase of micro-pores in the foliated cataclasite, possibly caused by fragmentation, and granulation and crack sealing in the fault zone.  相似文献   

旋挖钻进中硬岩及卵砾层钻头结构及施工工艺研究          下载免费PDF全文

张公正 《探矿工程》2005,32(2):40-42

旋挖钻进技术作为一种高效优质的钻进方法近年来广泛地被用于公路、铁路及大型水电站基础工程施工建设中，取得了良好的社会效益和经济效益。探讨了在卵砾石、漂石等复杂地层以及坚硬基岩中进行旋挖钻进所用钻头的结构及其施工工艺。  相似文献   

岩土钻掘设备的液压步履机构          下载免费PDF全文

王世玉  薛军 《探矿工程》2005,32(6):41-43

因液压步履移位最方便，辅助时间短，换向灵活，移位对孔准确，大型岩土钻掘设备施工的群孔现场实现近距离的自行迁移多采用液压步履机构。详细叙述了双向移动和单向移动加转向步履机构的结构和特点。  相似文献   

小动力旋挖钻机用嵌岩短螺旋钻头结构形式的改进          下载免费PDF全文

刘南昌  胡继良  黄玉文  翁炜  张宏智 《探矿工程》2005,32(2):43-43,46

采用小动力无加压旋挖钻机在粒径较大的卵砾石地层和泥页岩地层中进行1500 mm以上大口径钻孔灌注桩施工，由于钻机动力小且不能加压，用常规嵌岩短螺旋钻头钻进出现进尺慢或不进尺现象。通过对河南西峡县宛西制药责任有限公司新厂房桩孔施工过程中出现此种现象的分析和处理，提出了嵌岩短螺旋钻头针对性的改进措施，并取得了良好效果。  相似文献   

新型充气钻井液在新疆严重漏失地层的应用          下载免费PDF全文

夏建国  乌效鸣  胡郁乐 《探矿工程》2005,32(9):46-48,51

利用特殊植物纤维KWS作为泥浆处理剂的新型充气钻井液，不仅具有常规充气钻井液低密度、排粉能力强、节约用水等优点，还可以不受钠、钙离子的影响，提高钻井泡沫稳定性和钻井液抗盐能力。通过采用此种新型充气钻井液，利用其低密度特性、特殊泥饼、泡沫的群体封堵作用和泡沫的疏水屏蔽作用，成功解决了裂隙地层的漏失问题，恢复了钻探生产。在我国西部干旱缺水漏失地区具有良好的应用前景。  相似文献   

液体高膨胀材料充填堵漏试验应用     

滕子军  赵善友 《探矿工程》2005,32(9):49-51

介绍了钻探施工中，利用膨胀材料充填、堵漏的新工艺，其具有经济、高效、安全的特点。  相似文献   

鄂北工区钻头型号及钻井参数的优化          下载免费PDF全文

李德红 《探矿工程》2005,32(8):50-54

通过对近年来鄂北工区所施工井的钻井资料进行分析、对比，优选出了适合于各区块、各井段的钻头型号和钻井参数，提高了机械钻速，缩短了钻井周期，使鄂北工区的钻井技术上了一个新的台阶，加速了鄂北气田的建设。  相似文献   

Numerical simulation of percussive drilling          下载免费PDF全文

Alexandre Depouhon  Vincent Denoël  Emmanuel Detournay 《国际地质力学数值与分析法杂志》2015,39(8):889-912

This paper presents a novel dynamical model to analyze the long‐term response of a percussive drilling system. This departs from existing approaches that usually consider a single activation and bit/rock interaction cycle for the analysis of the process performance. The proposed model integrates the axial dynamics of an elastic piston and an elastic drill bit, a motion‐dependent pressure law to drive the piston, and a generalized bit/rock interaction law representative of the dynamic indentation taking place at the bit/rock interface. It applies to down‐the‐hole percussive drilling as well as top‐hole, with minor modifications. The model does not account for the angular motion or the hole cleaning, however. The model is first formulated mathematically; then, a finite‐dimensional approximation is proposed for computations. Numerical analyses of the model response, for a low‐size down‐the‐hole percussive system, follow. The period‐1 stationary response for the reference configuration is studied in detail, and parametric analyses assessing the influence on the rate of penetration of the bit/rock interaction parameters, the feed force, and the percussive activation parameters are conducted. These analyses reveal that the multiscale nature of the process is well captured by the model and recover expected trends for the influence of the parameters. They also suggest that a significant increase of the penetration rate can be achieved by increasing the percussive frequency. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献