软硬互层金刚石复合片钻头在地浸砂岩型铀矿中的研究及应用          下载免费PDF全文

要二仓  邢预恩  杨爱军 《探矿工程》2008,35(1):68-70

针对近年在巴音戈壁盆地及鄂尔多斯盆地钻探所遇到的复杂地质情况,研究试验了PDC钻头,在地浸砂岩铀矿钻探生产中取得了良好的效果,并制定总结了相应的钻进参数.  相似文献   

存储式岩心定向取心技术应用研究          下载免费PDF全文

周策  陈文俊  石绍云  汤国起 《探矿工程》2008,35(7):77-79

采用岩心定向取心技术不仅可以迅速而方便地确定地下矿层和结构面的产状,而且还可以判断矿层的走向,了解地层倾向,预测钻孔弯曲的趋势。介绍了存储式岩心定向取心原理、关键技术问题、器具构成、技术参数以及现场应用情况。  相似文献   

基于泡沫钻进中消泡装置的试验研究     

徐良  孙友宏 《探矿工程》2008,35(6):5-7

泡沫钻进过程中,会产生很多泡沫,如不及时清除,会造成施工现场泡沫的大量堆积,影响正常的生产。因此,选择合适的消泡方法在泡沫钻进过程中是非常重要的环节。选用机械消泡法中的缝隙式消泡器,建立消泡装置室内试验台进行试验,取得了良好的效果,消泡率可达86%。  相似文献   

预防油页岩地层钻进中压差卡钻的措施     

赵宪富  台沐礼  孙德学  张元清  吕洪富 《探矿工程》2008,35(9):21-23

分析了油页岩地层钻进中压差卡钻发生的原因,提出了预防压差卡钻的途径及处理方法,并通过工程实例来强调预防为主的重要性。  相似文献   

气举反循环采矿方法单井试验及应用探讨     

周团正  杨述起  王自强  张西坤 《探矿工程》2008,35(6):19-22

湖南道县一个矿区,铁锰矿体储量约2200万t。由于复杂的水文地质和工程地质条件,从20世纪70年代发现后,一直没有开采。笔者通过多年大直径工程井的实践经验,查阅国内外资料后,提出了钻井-气举反循环法试开采的方法,并在现场进行了单孔开采试验,获得了比较满意的效果。以该矿体Ⅱ号矿为例,介绍了钻井-气举反循环法采矿的适用条件、工艺过程以及试采情况,并就以后大面积开采提出了若干技术措施。  相似文献   

GYD-300型全液压动力头工程钻机的研制     

靳益民  高淑芳 《探矿工程》2008,35(12):23-25,34

GYD-300型全液压动力头工程钻机为全液压驱动,动力头反循环式机型。液压系统采用插装阀集成结构,电液复合操作。使用PC控制监测系统,适时检测孔底各相关压力,对不同地层进行范围设置,实现钻进过程中孔底的自动、手动恒压钻进。重点介绍了该钻机的结构特点、实验情况、主要技术参数等。  相似文献   

Design and Strength Analysis of A Spherical Connector for Lifting Subsystem in Deep Sea Mining System     

冯雅丽张文明  冯福璋 《中国海洋工程》2006,20(4):605-613

1 .IntroductionThe lifting systemis composed of pipes andtheir connectors .It is not onlythe lifting channel formanganese nodule betweenthe miningship andintermediate bin,but alsothe supporting massfor deepsea miningequipment and cables .Sothe reliability…  相似文献   

The status of geological dredging techniques     

R. B. Kidd  Q. J. Huggett  A. T. S. Ramsay 《Marine Geophysical Researches》1990,12(1-2):131-143

Scientific sea-floor dredging is currently used in marine geology primarily by the hard-rock community interested in the recovery of basement rock samples from the unsedimented deep ocean floor. The technique has generally been eclipsed by ocean drilling for recovery of sedimentary rocks, because of perceived uncertainties in the location of sampling and in the representativeness of recovered material. This contribution reviews dredging equipment currently in use by marine geological institutions and refers to pinger attachments that allow precise information on the behaviour of the dredge to be telemetered back to the ship. We argue that improvements in ship navigation and transponder navigation at the seafloor, when used in conjunction with surface and/or deeply towed sidescan and swathemapping surveys, now allow for considerably less uncertainty on the location of dredge sampling. Refined sorting criteria for dredge hauls are now also available. Recent comparisons of regional sample recovery by ocean drilling and by dredge sampling indicate that the dredge hauls can usefully supplement the drilling data in the construction of sedimentary and tectonic histories of seafloor areas.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献   

Hilbert变换在海浪波高与周期联合分布函数中的应用     

李响  李海  张蕴斐  徐德伦  吴辉碇 《海洋预报》2006,23(3):1-13

Longuet-Higgins(1983)[1]导出了波高与周期的联合分布函数,此分布函数虽然与实际数据符合良好,但存在很大的缺陷,如:由此分布函数得出的波高分布为形式较为复杂的非Rayleigh分布,很难应用于工程计算中。孙孚(1988a)[2]应用射线理论导出了一种波高与周期联合分布,虽然弥补了Longuet-Higgins的一些缺陷,但推导过程过于复杂。本文在窄谱假定下通过应用Hilbert变换方法得出新的分布函数并与前两者比较,表明Hilbert变换的方法不但简便,而且完全克服Longuet-Higgins的不足,可以方便的应用于工程计算中。本文也为Hilbert变换的方法在工程中的应用提供了理论依据。  相似文献