Development and validation of a metallic haunch seismic retrofit solution for existing under‐designed RC frame buildings     

Stefano Pampanin  Constantin Christopoulos  Te‐Hsiu Chen 《地震工程与结构动力学》2006,35(14):1739-1766

The feasibility and efficiency of a seismic retrofit solution for existing reinforced concrete frame systems, designed before the introduction of modern seismic‐oriented design codes in the mid 1970s, is conceptually presented and experimentally investigated. A diagonal metallic haunch system is introduced at the beam–column connections to protect the joint panel zone from extensive damage and brittle shear mechanisms, while inverting the hierarchy of strength within the beam–column subassemblies and forming a plastic hinge in the beam. A complete step‐by‐step design procedure is suggested for the proposed retrofit strategy to achieve the desired reversal of strength hierarchy. Analytical formulations of the internal force flow at the beam–column‐joint level are derived for the retrofitted joints. The study is particularly focused on exterior beam–column joints, since it is recognized that they are the most vulnerable, due to their lack of a reliable joint shear transfer mechanism. Results from an experimental program carried out to validate the concept and the design procedure are also presented. The program consisted of quasi‐static cyclic tests on four exterior, ? scaled, beam–column joint subassemblies, typical of pre‐1970 construction practice using plain round bars with end‐hooks, with limited joint transverse reinforcement and detailed without capacity design considerations. The first (control specimen) emulated the as‐built connection while the three others incorporated the proposed retrofitted configurations. The experimental results demonstrated the effectiveness of the proposed solution for upgrading non‐seismically designed RC frames and also confirmed the applicability of the proposed design procedure and of the analytical derivations. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

双平面T型方管加强节点的承载力性能研究     

王新武 《世界地震工程》2007,23(3):129-132

通过有限元软件ANSYS对双平面T型方管相贯焊接加强节点轴力和弯矩作用下的极限承载力进行了数值模拟研究，采用的加强方式在主管内部设置纵向加劲肋。研究结果表明这种加强方式对于双平面T型节点的单项承载力都有不同程度的提高作用，且提高幅度与几何参数有关。  相似文献   

断层失稳错动热场前兆模式：雁列断层的实验研究   总被引：14，自引：4，他引：14       下载免费PDF全文

马瑾  刘力强  刘培洵  马胜利 《地球物理学报》2007,50(4):1141-1149

在实验室使用红外热像仪和接触式测温仪同步观测记录了压性和张性雁列断层失稳错动前后的热场变化过程.从实验记录中发现，在断层失稳引起温度场和热红外辐射亮温温度场上升之前，在两断层段之间的岩桥区发生降温变化.断层带开始升温发生在失稳前2～3 s内，岩桥区的降温却发生在失稳前约20s，这两个超前时间长度相差近一个量级.此类热场先降后升变化过程在雁列构造变形中有一定的普遍性，可能作为雁列断层失稳错动的热场前兆模式.根据实验观测结果，详细描述了上述热场变化的时间过程及其空间分布特征，分析了产生此种失稳前兆模式的机制，显著异常出现的条件及有利观测部位，讨论了它在地震前兆探索等研究中的意义.  相似文献   

新疆博格达山北麓山前断裂西段的断裂组成及其在全新世时期的活动   总被引：6，自引：2，他引：4  

栾超群  胡军  罗福忠  李锰  胡伟华 《内陆地震》1998,12(4):355-361

博格达山北麓山前断裂西段全长１４０ ｋｍ ,由５ 条雁列状排列的逆断裂组成。全新世时期,古牧地断裂的最新活动发生在６．８２±０．５４～４．８７±０．３９ Ｋａ Ｂ．Ｐ．之间;四工河口断裂切割Ⅱ级河流阶地,最新活动时间与古牧地断裂大体相同;泉泉子断裂切割Ⅰ级河流阶地,最新活动发生在３．７５±０．４１ Ｋａ Ｂ．Ｐ．;热水河断裂及东风牧场断裂由于缺乏断代年龄实测数据,无法对其最新活动时间作出判断,但是推断它们也是全新世活断裂  相似文献   

�������й�����������ͨ������λ�Ʒ�������ģ��     

王学滨  顾路  马冰  吕家庆 《大地测量与地球动力学》2014,34(2):45-50

?????????????????????????????й?????????????????У?????FLAC??3D???????????????????λ?????????????????????????λ??????????????ɡ??о?????????????й???????????????????ж???????λ???????????λ????????????????λ?ò???????????й????λ????????????????????λ?????????????????й???λ??????????????????????????????????  相似文献   

An approach to determining the thicknesses of shear bands with an echelon‐crack structure     

G. S. Wang  L. W. Kong  C. F. Wei 《国际地质力学数值与分析法杂志》2013,37(6):618-640

In this paper, the internal structure of shear band is investigated, and a model of the shear band with an echelon crack structure is developed. The model assumes the shear band to be composed of two conjugate sets of echelon cracks, such that the smaller echelon cracks are embedded in the space of the larger ones. The additional strain induced by the echelon cracks and the anisotropic development of the compliance tensor in the shear band zone are analyzed. The critical crack density at the onset of shear band is obtained by applying the bifurcation condition. Deviating from previous approaches, the new procedure evaluates the thickness of shear band based on the geometrical characteristics of echelon crack arrays and the failure probability of grain boundaries in the longitudinal direction at the onset of shear band. Parametric analysis shows that grain size, internal friction angle, dilation angle, and failure probability of grain boundaries are the dominant factors that account for the shear band thickness. The calculated results are consistent with the experimental data available in the literature. The model soundly explains that the measurements of the shear band thickness are generally scattered, ranging from 4 to 30 (or even more) times the grain size. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Assessing the Vibrational Frequencies of the Holweide Hospital in the City of Cologne (Germany) by Means of Ambient Seismic Noise Analysis and FE modelling     

Stefano?ParolaiEmail author  Andreas?F?cke  Sandra?M.?Richwalski  Lothar?Stempniwski 《Natural Hazards》2005,34(2):217-230

Ambient seismic noise measurements were conducted inside the Holweide Hospital (Cologne) for checking whether its frequencies of vibration fall into the range where soil amplification is expected. If this is the case, damage might increase in case of an earthquake due to an amplified structural response of the building. Two different techniques were used: the ratio between the horizontal and vertical components of the spectra recorded at stations located inside the building and the ratio between the corresponding components of the spectra recorded simultaneously inside the building and at a reference station placed outside. While the former method might be preferred because of less equipment involved, the latter has the advantage of producing more stable results and deleting automatically the influence of the sedimentary cover, which might obscure some eigenfrequencies of vibration of the building. An independently performed finite-element analysis of the hospital showed a good correlation between measured and calculated eigenmodes.  相似文献   

黄土垂直节理细微观特征及发育机制探讨     

冯立  张茂省  胡炜  董英  孟晓捷 《岩土力学》2019,40(1):235-244

  相似文献   

甘肃金川矿区构造应力场与构造演化研究          下载免费PDF全文

和秋姣  赖健清  毛先成  肖文舟  艾启兴  刘烨  杜日俊 《地质找矿论丛》2019,34(2):265-273

文章统计分析了金川矿区内地层和侵入体中的节理构造,对矿区内的共轭剪节理进行配套、分期,综合区域构造演化史后分析了矿区构造应力场。研究表明,金川矿区从新太古代到古生代至少受到4期古构造应力的作用。第一期构造应力场为NS向的挤压,由阴山陆块与鄂尔多斯陆块碰撞形成华北古陆西部陆块引起。第二期构造应力场为NE-SW向的挤压,与华北克拉通东、西陆块碰撞拼合并参与Columbia超大陆拼合事件有关;其后阿拉善陆块与华南陆块参与Rodinia超大陆拼合事件,应力场持续作用。第三期构造应力场为近NS向的挤压,由祁连洋不断向北俯冲引起。第四期构造应力场为NNE-SSW向的挤压,与祁连造山带发生的强烈造山运动有关。  相似文献   

Some recent advances in the modelling of soft rock joints in direct shear   总被引：1，自引：0，他引：1  

C.M. Haberfield  J.P. Seidel 《Geotechnical and Geological Engineering》1999,17(3-4):177-195

This paper presents a review of recent developments made by the authors into the modelling of rock joints in direct shear. Careful observation of laboratory direct shear testing on concrete/rock joints containing two-dimensional roughness has allowed theoretical models of behaviour to be developed. The processes modelled include asperity sliding, asperity shearing, post-peak behaviour, asperity deformation and distribution of stresses on the joint interface. Model predictions compare extremely well with laboratory test results. These models were then applied to direct shear tests on rock/rock joints, and although behaviour in general was well predicted, the strength of rock/rock joints was over-predicted. Direct shear tests have also been carried out on samples containing both two- and three-dimensional roughness to test the accuracy of the two-dimensional approximation to roughness adopted in the theoretical models.  相似文献