On the dependence of the saturated hydraulic conductivity upon the effective porosity through a power law model at different scales          下载免费PDF全文

Carmine Fallico  Samuele De Bartolo  Massimo Veltri  Gerardo Severino 《水文研究》2016,30(13):2366-2372

We study the scale dependence of the saturated hydraulic conductivity K_s through the effective porosity n_e by means of a newly developed power‐law model (PLM) which allows to use simultaneously measurements at different scales. The model is expressed as product between a single PLM (capturing the impact of the dominating scale) and a characteristic function κ^? accounting for the correction because of the other scale(s). The simple (closed form) expression of the κ^?‐function enables one to easily identify the scales which are relevant for K_s. The proposed model is then applied to a set of real data taken at the experimental site of Montalto Uffugo (Italy), and we show that in this case two (i.e. laboratory and field) scales appear to be the main ones. The implications toward an important application (solute transport) in Hydrology are finally discussed. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

O₂-O₂云反演算法及其在TROPOMI上的应用     

张文强  刘诚  郝楠  Gimeno Garcia Sebastian  邢成志  张成歆  苏文静  刘建国 《遥感学报》2020,24(11):1363-1378

利用遥感技术对大气环境污染进行监测时，云是影响痕量气体反演精度的重要因素，因此在痕量气体反演中需要对云的影响进行校正，通常使用的云参数主要是有效云量和云压。本文基于O₂-O₂ 477 nm吸收波段构建了O₂-O₂云反演算法：首先，根据有效云量和云高与连续反射率和O₂-O₂斜柱浓度之间的对应关系，结合假定的云模型利用VLIDORT辐射传输模型建立关于有效云量和云压的查找表；然后，通过差分吸收光谱技术拟合卫星载荷观测的大气层顶辐射，获得O₂-O₂斜柱浓度并计算连续反射率；最后，结合辅助数据，根据查找表进行插值反演获得有效云量和云压。通过将算法应用到OMI观测数据，将反演结果与OMCLDO2产品进行对比验证，有效云量和云压空间分布一致，相关系数R均超过0.97；并还将该算法应用于下一代大气成分监测仪器TROPOMI，与FRESCO+产品对比，有效云量和云压空间分布基本一致，当地表类型为海洋时，有效云量相关系数R大于0.97，云压相关系数R大于0.94，云压反演结果存在一定的区别；通过将O₂-O₂云反演算法和FRESCO+云压反演结果与CALIOP Cloud Layer产品进行对比，结果表明，在低云情况下，O₂-O₂云反演算法线性回归方程斜率为0.782，截距为198.0 hPa，相关系数R为0.850，算法表现优于FRESCO+。而在高云情况下，FRESCO+反演结果更接近CALIOP云压结果。在OMI和TROPOMI上的应用表明O₂-O₂云反演算法在大气云反演中具有较高的准确性和可行性，可以为大气痕量气体反演的校正提供云参数，并为中国同类型卫星载荷的云反演算法提供算法参考。  相似文献   

Geospatial data mining for digital raster mapping     

Bruce K. Wylie  Neal J. Pastick  Joshua J. Picotte  Carol A. Deering 《地理信息系统科学与遥感》2019,56(3):406-429

We performed an in-depth literature survey to identify the most popular data mining approaches that have been applied for raster mapping of ecological parameters through the use of Geographic Information Systems (GIS) and remotely sensed data. Popular data mining approaches included decision trees or “data mining” trees which consist of regression and classification trees, random forests, neural networks, and support vector machines. The advantages of each data mining approach as well as approaches to avoid overfitting are subsequently discussed. We also provide suggestions and examples for the mapping of problematic variables or classes, future or historical projections, and avoidance of model bias. Finally, we address the separate issues of parallel processing, error mapping, and incorporation of “no data” values into modeling processes. Given the improved availability of digital spatial products and remote sensing products, data mining approaches combined with parallel processing potentials should greatly improve the quality and extent of ecological datasets.  相似文献   

南海北部海域油气勘探保障建设选址适宜性研究     

武二亮  陈浩东  刘裕光  安永宁 《海岸工程》2020,39(4):256-262

为分析南海北部海域油气勘探保障建设选址的适宜性,在广泛研究备选区特征资料的基础上,基于层次分析法(Analytic Hierarchy Process, AHP)原理,以自然环境因素、开发环境因素、基础设施与投资情况以及其他因素作为一级评判准则,建立了包括12项二级评判准则的递进层次结构模型,并以永兴岛、赵述岛和晋卿岛作为3个假定备选区,来验证分析评价模型的有效性和可靠性。AHP评判结果显示,3个备选区的整体优劣指数依次为0.587 1, 0.212 1, 0.200 8;AHP模型的一致性比例CR值为0.020 3。通过分析和筛选影响远海油气勘探保障建设的选址因子,构建基于AHP原理的选址评价模型,可用于分析评价南海北部岛礁油气勘探保障建设选址的适宜性。  相似文献   

A smoothed cap model for variably saturated soils and its robust numerical implementation          下载免费PDF全文

P. Gamnitzer  G. Hofstetter 《国际地质力学数值与分析法杂志》2015,39(12):1276-1303

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils     

David Mašín 《国际地质力学数值与分析法杂志》2010,34(1):73-90

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Site characterization model using least‐square support vector machine and relevance vector machine based on corrected SPT data (Nc)     

Pijush Samui  T. G. Sitharam 《国际地质力学数值与分析法杂志》2010,34(7):755-770

Statistical learning algorithms provide a viable framework for geotechnical engineering modeling. This paper describes two statistical learning algorithms applied for site characterization modeling based on standard penetration test (SPT) data. More than 2700 field SPT values (N) have been collected from 766 boreholes spread over an area of 220 sqkm area in Bangalore. To get N corrected value (N_c), N values have been corrected (N_c) for different parameters such as overburden stress, size of borehole, type of sampler, length of connecting rod, etc. In three‐dimensional site characterization model, the function N_c=N_c (X, Y, Z), where X, Y and Z are the coordinates of a point corresponding to N_c value, is to be approximated in which N_c value at any half‐space point in Bangalore can be determined. The first algorithm uses least‐square support vector machine (LSSVM), which is related to a ridge regression type of support vector machine. The second algorithm uses relevance vector machine (RVM), which combines the strengths of kernel‐based methods and Bayesian theory to establish the relationships between a set of input vectors and a desired output. The paper also presents the comparative study between the developed LSSVM and RVM model for site characterization. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates     

J. Mertens  H. Madsen  M. Kristensen  D. Jacques  J. Feyen 《水文研究》2005,19(8):1611-1633

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

基于CityEngine的三维城市规划设计与研究     

李宏旭  杨李东 《测绘与空间地理信息》2016,(5):55-57

城市规划领域越来越需要三维建模技术的支持。CityEngine作为一种新型的三维建模软件,不仅可以批量生成规划模型,还可以用来辅助三维城市规划设计。本文基于CityEngine规则建模方法,实现了规划方案对比、建筑体量调整、规划指标计算等功能,通过对某小区进行实际建模验证,证明了CityEngine可以为城市规划者们提供新的思路,为城市设计和城市管理提供决策支持。  相似文献   

A modeling study of effective radiative forcing and climate response due to tropospheric ozone     

Bing Xie  Hua Zhang  Zhili Wang  Shuyun Zhao  Qiang Fu 《大气科学进展》2016,33(7):819-828

This study simulates the effective radiative forcing(ERF) of tropospheric ozone from 1850 to 2013 and its effects on global climate using an aerosol–climate coupled model, BCC AGCM2.0.1 CUACE/Aero, in combination with OMI(Ozone Monitoring Instrument) satellite ozone data. According to the OMI observations, the global annual mean tropospheric column ozone(TCO) was 33.9 DU in 2013, and the largest TCO was distributed in the belts between 30°N and 45°N and at approximately 30°S; the annual mean TCO was higher in the Northern Hemisphere than that in the Southern Hemisphere;and in boreal summer and autumn, the global mean TCO was higher than in winter and spring. The simulated ERF due to the change in tropospheric ozone concentration from 1850 to 2013 was 0.46 W m~(-2), thereby causing an increase in the global annual mean surface temperature by 0.36℃, and precipitation by 0.02 mm d~(-1)(the increase of surface temperature had a significance level above 95%). The surface temperature was increased more obviously over the high latitudes in both hemispheres, with the maximum exceeding 1.4?C in Siberia. There were opposite changes in precipitation near the equator,with an increase of 0.5 mm d~(-1)near the Hawaiian Islands and a decrease of about-0.6 mm d~(-1)near the middle of the Indian Ocean.  相似文献