2010智利莫尔M_W8.8地震对其破裂区及附近地区地震活动性的影响     

武安绪  陈学忠  李艳娥 《地震》2019,39(1):146-154

强震的发生与地壳中应力增加有关。库仑破裂应力被用于研究由于某次强震发生所产生的应力变化。2010年智利莫尔M_W8.8地震发生之后,其破裂区以南地区没有发生M≥6.0地震,而在其以北地区于2015年在智利发生了伊亚佩尔M_W8.3级地震。在这两个地区地震活动性悬殊。本文利用库仑破裂应力研究了2010年智利莫尔M_W8.8地震在这两个地区产生的应力变化。结果表明,2010年智利莫尔M_W8.8地震在其破裂区以北地区产生的应力变化为正值,有利于断层错动发震,而在其破裂区以南地区产生的应力变化为负值,具有抑制断层错动发震的作用。  相似文献   

2015年四川乐山金口河M5.0地震孕震构造条件分析     

宫悦  龙锋  梁明剑  易桂喜  王宇玺  格桑扎西 《中国地震》2019,35(3):445-454

2015年1月14日乐山金口河M5.0地震发生在历史地震强度较低的川南山区与四川盆地交界一带。基于四川区域地震台网的震相报告与波形资料,采用双差定位法对地震序列进行重新定位,同时,采用CAP波形反演方法及HASH方法反演了主震及序列中8次M_L≥2.0地震的震源机制解。另外,利用Coulomb3计算了主震发生后库仑应力改变量,得到的结果如下：①重新定位结果显示,金口河M5.0地震位于（103.18°E,29.32°N）,震源深度16.6km,略深于波形反演结果（12km）。序列分布在NNW向天全-荥经断裂和NE向西河-美姑断裂的交汇部位,余震序列在空间上呈NE向展布。②M5.0主震的机制解为节面Ⅰ：走向350°/倾角46°/滑动角107°,节面Ⅱ：走向146°/倾角47°/滑动角73°,表现为走向NW（NNW）、中等倾角的逆冲型运动方式。序列中其余8次M_L≥2.0余震大多以走向NE的逆冲型地震为主,个别为走滑或正断层类型。主震和大部分余震的节面方向不一致,主震节面方向与余震长轴方向也不一致。③主震后库仑应力改变量显示,余震主要发生在主震引起的库仑破裂应力增加的区域。综合分析推测,NNW向天全-荥经断裂为本次地震主震的发震构造,倾向NE的机制解节面Ⅰ指出了该断裂的几何产状;M5.0主震发生后,立即触发了其旁侧的NE向西河-美姑断裂,并激发了多次余震。  相似文献   

互层胶结土中正断层地震地表破裂位错特征研究          下载免费PDF全文

龚放  黄今  白志勇 《地震工程学报》2019,41(1):162-168

为了解决采用Trimble GX 3D地面激光三维扫描仪分析互层胶结土中正断层地震地表破裂位错特征时,未有效模拟地表垂直和水平位移的基本特征,获取的地表破裂位错特征结果不准确的问题。提出新的互层胶结土中正断层地震地表破裂位错特征研究方法,先构建地震地表弹性位错模型,分析互层胶结土正断层的地表三维断裂特征,得到地表在受到走滑、逆冲和张开错动导致的地表错位变化情况;再通过正断层地震地表破裂离心机试验,获得互层胶结土中正断层地震地表破裂位错特征。试验结果说明,所提方法可有效分析互层胶结土中正断层地震地表破裂位错特征,且破裂点在土体模型中部和中下部的裂缝深度分别为22.4 m和33.4 m,裂缝上的破裂点处于土体模型的中下部时,裂缝的深度越深。  相似文献   

玛尼地震的InSAR形变研究与模拟     

石晓春  王长委  余鹏飞  杜志彪 《华南地震》2019,39(2):12-18

采用欧洲空间局ERS-2的星载干涉雷达数据,选取1997年11月8日MW7.6级玛尼地震作为研究对象,采用了差分干涉方法,在通过对覆盖同一地区的SAR数据进行差分干涉处理,得到了玛尼地震的视线向同震形变场。经研究发现:该地震形变场呈长轴近北东东向不规则椭圆形分布,地表破裂带长度约为130km,发震断层走向约为78°,断裂为左行走滑特征。断层以南为隆起区,在发震断层附近最大视线向隆起位移量为113.6cm,断层以北为沉降区,最大视线向沉降位移量为170.4cm。基于Okada模型实现了具有复杂结构的4段断层段参数的InSAR形变场数据模拟,获得断层的最大走滑为6m,估计出玛尼地震的标量地震矩M0为2.69×10^20Nm,计算得到的矩震级MW为7.6。证明了研究方法的正确性和研究结论的可靠性。  相似文献   

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales     

Robert I. Ferguson  Richard J. Hardy  Rebecca A. Hodge 《地球表面变化过程与地形》2019,44(12):2437-2449

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.  相似文献   

四川长宁M_S6.0地震区域构造应力场特征分析          下载免费PDF全文

尹欣欣  郭安宁  赵韬  李少华 《地震工程学报》2019,41(5):1215-1220

2019年6月17日在四川宜宾市长宁县（28.34°N,104.90°E）发生M_S6.0地震,余震发育。本文利用区域测震台网的地震观测数据基于CAP方法计算了28°~29°N,104°~105°E范围内的14个M_S>3.0以上地震的震源机制解,结合全球矩心矩张量目录和部分前人研究结果中该区域的共27个震源机制解数据,应用MSATSI软件反演了研究区域的应力场。将研究区域按0.1°×0.1°划分成25个应力网格,最终得到9个网格的应力分布结果,大多数应力场方向稳定,根据主震所在应力网格点得到主震的断层类型为主逆冲型。本文研究成果为四川长宁地区的孕震机理、活动构造以及地震趋势判定提供了可靠的参考依据。  相似文献   

循环荷载作用下红黏土累积变形研究   总被引：2，自引：1，他引：1       下载免费PDF全文

谢栎  吴建奇 《地震工程学报》2019,41(6):1623-1629

通过GDS动三轴设备对赣南红黏土进行了一系列排水条件下的大次数循环试验,研究不同循环应力比、固结应力比及围压对赣南红黏土累积变形特性的影响。结果表明：在不同固结应力比、固结压力和循环应力比条件下,红黏土的累积应变都呈现出先迅速累积,后增长变缓,最终稳定的趋势;在一定的循环次数之后,不同初始固结应力和不同初始应力比条件下累积应变与循环次数之间的变形规律呈现为线性关系,且初始固结应力和初始固结应力比越小,其线性相关性越好;不同循环应力比下赣南红黏土的平均累积应变速率与循环次数之间也呈现出明显的线性关系。此外,基于以上关系建立了赣南红黏土在长期循环荷载作用下的累积变形预测模型,并通过对比验证了该模型的可行性。  相似文献   

Variation in the vertical zonality of erodibility and critical shear stress of rill erosion in China's Hengduan Mountains     

Zhengan Su  Donghong Xiong  Jianhui Zhang  Tao Zhou  Hongkun Yang  Yifan Dong  Haidong Fang  Liangtao Shi 《地球表面变化过程与地形》2019,44(1):88-97

Soil erodibility is an essential parameter used in soil erosion prediction. This study selected the Liangshan town watershed to quantify variation in the vertical zonality of rill erodibility (k_r) in China's ecologically fragile Hengduan Mountains. Soil types comprised of yellow–brown (soil A), purple (soil B), and dry-red (soil C) in a descending order of occurrence from the summit to the valley, which roughly corresponds to the vertical climate zone (i.e. cool-high mountain, warm-low mountain, and dry-hot valley sections) of the study area. With elevation, vertical soil zonality varied in both soil organic matter (SOM) content and soil particle-size fractions. A series of rill erosion-based scour experiments were conducted, using water discharge rates of 100, 200, 300, 400, 500, and 600 mL min^-1. Additionally, detachment rates (Dr) were measured under three hydrological conditions (the drainage, saturation, and seepage treatments). Results show that both Dr and flow shear stress (Ʈ) values increased as discharge increased. As elevation increased, the k_r values decreased, while the vertical zonality of critical shear stress (Ʈ_c) values showed no obvious variation. The highest k_r values were observed during the seepage treatment, followed by the saturation treatment then drainage treatment, indicating that variation in vertical hydraulic gradients could significantly alter k_r values. This study also found that land-use types could also alter k_r and Ʈ_c values. Further research, however, is necessary to better quantify the effects of subsurface hydrological conditions and land-use types on k_r under different soil zonalities in China's Hengduan Mountains. © 2018 John Wiley & Sons, Ltd.  相似文献   

Seismic responses of postyield hardening single–degree-of-freedom systems incorporating high-strength elastic material     

Hanlin Qiang  Peng Feng  Zhe Qu 《地震工程与结构动力学》2019,48(6):611-633

It is widely accepted that ductility design improves the seismic capacity of structures worldwide. Nevertheless, inelastic deformation allows serious damage to occur in structures. Previous studies have shown that a certain level of postyield stiffness may reduce both the peak displacement and residual deformation of a structure. In recent years, several high-strength elastic materials, such as fiber-reinforced polymer (FRP) and high-strength steel bars, have been developed. Application of these materials can easily provide a structure with a much higher and more stable postyield stiffness. Many materials, members, and structures that incorporate both high-strength elastic materials and conventional materials show significant postyield hardening (PYH) behaviors. The significant postyield stiffness of PYH structures can help effectively reduce both peak and residual deformations, providing a choice when designing resilient structures. However, the findings of previous studies of structures with elastic-perfectly plastic (EPP) behavior or small postyield stiffness may not be accurate for PYH structures. The postyield stiffness of a structure must be considered an important primary structural parameter, in addition to initial stiffness, yielding strength, and ductility. In this paper, extensive time history and statistical analyses are carried out for PYH single–degree-of-freedom (SDOF) systems. The mean values and coefficients of variation of the peak displacement and residual deformation are obtained and discussed. A new R-μ_p-T-α relationship and damage index for PYH structures are proposed. A theoretical model for the calculation of residual deformation is also established. These models provide a basis for developing the appropriate seismic design and performance evaluation procedures for PYH structures.  相似文献   

首都圈东部地区震群序列性质判定   总被引：1，自引：1，他引：0  

岳晓媛  武安绪  冯刚  马梁 《地震地磁观测与研究》2019,40(4):8-15

采用传统方法和数字地震学方法（视应力）,对首都圈东部地区2009-2017年发生的震群序列性质进行分析,分析结果表明：①使用传统方法不能确定震群序列性质,可以利用视应力方法进一步分析,该方法能够反映每个震群应力场的变化特征,可以进行异常性质判别;②通过2种方法的对比分析,可以提高震群序列异常性质判定结果的科学性和可信度,为后续地震活动趋势提供有力的参考依据。对2种方法进行震例检验,可知后续地震一般为中等以上地震,在震群（具有异常性质）发生1-7个月后发震,发震位置在震源区附近。  相似文献