Transient seepage analysis in zoned anisotropic soils based on the scaled boundary finite‐element method          下载免费PDF全文

Mohammad Hossein Bazyar  Abbas Talebi 《国际地质力学数值与分析法杂志》2015,39(1):1-22

The scaled boundary finite‐element method, a semi‐analytical computational scheme primarily developed for dynamic stiffness of unbounded domains, is applied to the analysis of unsteady seepage flow problems. This method is based on the finite‐element technology and gains the advantages of the boundary element method as well. Only boundary of the domain is discretized, no fundamental solution is required and singularity problems can be modeled rigorously. Anisotropic and non‐homogeneous materials satisfying similarity are modeled with no additional efforts. In this study, firstly, formulation of the method for the transient seepage flow problems is derived followed by its solution procedures. The accuracy, simplicity and applicability of the method are demonstrated via four numerical examples of transient seepage flow – three of them are available in the literature. Homogenous, non‐homogenous, isotropic and anisotropic material properties are considered to show the versatility of the technique. Excellent agreement with the finite‐element method is observed. The method out‐performs the finite‐element method in modeling singularity points. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

New magnetostratigraphic and pedostratigraphic investigations of loess deposits in north‐east China and their implications for regional environmental change during the Mid‐Pleistocene climatic transition          下载免费PDF全文

Lin Zeng  Huayu Lu  Shuangwen Yi  Yongxiang Li  Anqi Lv  Wenchao Zhang  Zhiwei Xu  Haifeng Wu  Han Feng  Mengchun Cui 《第四纪科学杂志》2016,31(1):20-32

  相似文献   

Estimation of near surface soil moisture in a sloping terrain of a Himalayan watershed using ENVISAT ASAR multi‐incidence angle alternate polarisation data          下载免费PDF全文

Sameer Saran  Geert Sterk  Rajiv Nair  R. S. Chatterjee 《水文研究》2014,28(3):895-904

Soil moisture is one of the important input variables in hydrological and water erosion models. The extraction of information on near surface soil moisture from synthetic aperture radar (SAR) is well established mostly for flat terrain and using low incidence angle single polarisation data. The ENVISAT advanced SAR (ASAR) data available in multiple incidence angles and alternate polarisation modes were investigated in this study for soil moisture estimation in sloping terrain. The test site was Sitla Rao watershed in the Lesser Himalayas of northern India. Empirical models were developed to estimate near surface soil moisture in bare agricultural fields using alternate polarisation ASAR data. Both soil moisture and surface roughness field measurements were performed during the satellite passes. Backscatter from medium incidence angle (IS‐4) and vertical‐vertical (VV) polarisation signal is correlated better with volumetric soil moisture content compared to other incidence angles. The model parameters were further improved, and soil moisture estimation was refined by combining medium incidence angle (IS4) vertical‐horizontal polarisation response as another variable along with VV polarisation response. The effect of slope on the radar backscatter was minimized by incorporating local incidence angles derived from an ASTER DEM. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

基于垂直剖面函数的天顶对流层延迟插值算法     

徐康  邓兴升 《大地测量与地球动力学》2020,40(1):66-70

通过分析由ERA-Interim气象再分析资料积分方法得到的天顶对流层总延迟随高程变化的规律,提出一种基于垂直剖面函数的天顶对流层延迟(ZTD)插值算法。该算法以ZTD的垂直分布规律为基础,通过垂直剖面函数实现ZTD在高程方向上的精准投影延拓,可以避免因高差较大造成的空间内插结构畸形。采用IGS站提供的高精度对流层产品进行实验验证表明,该算法相对于传统算法能够有效提高ZTD改正值的精度,尤其在高差超过1 km的情况下,相对于反距离加权法精度提升了96%,相对于空间回归法精度提升了79%。  相似文献   

Fingerprinting the 8.2 ka event climate response in a coupled climate model     

Ane P. Wiersma  Didier M. Roche  Hans Renssen 《第四纪科学杂志》2011,26(1):118-127

Using results from coupled climate model simulations of the 8.2 ka climate event that produced a cold period over Greenland in agreement with the reconstructed cooling from ice cores, we investigate the typical pattern of climate anomalies (fingerprint) to provide a framework for the interpretation of global proxy data for the 8.2 ka climate event. For this purpose we developed an analysis method that isolates the forced temperature response and provides information on spatial variations in magnitude, timing and duration that characterise the detectable climate event in proxy archives. Our analysis shows that delays in the temperature response to the freshwater forcing are present, mostly in the order of decades (30 a over central Greenland). The North Atlantic Ocean initially cools in response to the freshwater perturbation, followed in certain parts by a warm response. This delay, occurring more than 200 a after the freshwater pulse, hints at an overshoot in the recovery from the freshwater perturbation. The South Atlantic and the Southern Ocean show a warm response reflecting the bipolar seesaw effect. The duration of the simulated event varies for different areas, and the highest probability of recording the event in proxy archives is in the North Atlantic Ocean area north of 40° N. Our results may facilitate the interpretation of proxy archives recording the 8.2 ka event, as they show that timing and duration cannot be assumed to correspond with the timing and duration of the event as recorded in Greenland ice cores. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Facies analysis of the Middle and Late Quaternary sediment infill of the northern Weihe Basin,Central China          下载免费PDF全文

Daniël S. Rits  Maarten A. Prins  Simon R. Troelstra  Ronald T. van Balen  Yan Zheng  Christiaan J. Beets  Bin Wang  Xiaoqiang Li  Jie Zhou  Hongbo Zheng 《第四纪科学杂志》2016,31(2):152-165

  相似文献   

Discrete element model for crack propagation in brittle materials          下载免费PDF全文

Ba Danh Le  Georg Koval  Cyrille Chazallon 《国际地质力学数值与分析法杂志》2016,40(4):583-595

We propose a discrete element model for brittle rupture. The material consists of a bidimensional set of closed‐packed particles in contact. We explore the isotropic elastic behavior of this regular structure to derive a rupture criterion compatible to continuum mechanics. We introduce a classical criterion of mixed mode crack propagation based on the value of the stress intensity factors, obtained by the analysis of two adjacent contacts near a crack tip. Hence, the toughness becomes a direct parameter of the model, without any calibration procedure. We verify the consistency of the formulation as well as its convergence by comparison with theoretical solutions of tensile cracks, a pre‐cracked beam, and an inclined crack under biaxial stress. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Significant differences in late Quaternary bedrock erosion and transport: East versus West Greenland ∼70°N – evidence from the mineralogy of offshore glacial marine sediments          下载免费PDF全文

JOHN T. ANDREWS  ANDERS A. BJORK  DENNIS D. EBERL  ANNE E. JENNINGS  EMILY P. VERPLANCK 《第四纪科学杂志》2015,30(5):452-463

  相似文献   

Elastic models for nonlinear response of rigid passive piles     

W. D. Guo 《国际地质力学数值与分析法杂志》2014,38(18):1969-1989

Recent study indicates that the response of rigid passive piles is dominated by elastic pile–soil interaction and may be estimated using theory for lateral piles. The difference lies in that passive piles normally are associated with a large scatter of the ratio of maximum bending moment over maximum shear force and induce a limiting pressure that is ~1/3 that on laterally loaded piles. This disparity prompts this study. This paper proposes pressure‐based pile–soil models and develops their associated solutions to capture response of rigid piles subjected to soil movement. The impact of soil movement was encapsulated into a power‐law distributed loading over a sliding depth, and load transfer model was adopted to mimic the pile–soil interaction. The solutions are presented in explicit expressions and can be readily obtained. They are capable of capturing responses of model piles in a sliding soil owing to the impact of sliding depth and relative strength between sliding and stable layer on limiting force prior to ultimate state. In comparison with available solutions for ultimate state, this study reveals the 1/3 limiting pressure (of the active piles) on passive piles was induced by elastic interaction. The current models employing distributed pressure for moving soil are more pertinent to passive piles (rather than plastic soil flow). An example calculation against instrumented model piles is provided, which demonstrates the accuracy of the current solutions for design slope stabilising piles. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock          下载免费PDF全文

J.‐W. Park  C. Park  J.‐W. Song  E.‐S. Park  J.‐J. Song 《国际地质力学数值与分析法杂志》2017,41(6):880-898

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献