Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures   总被引：4，自引：1，他引：4  

SHI  Qingzeng 《中国海洋工程》2002,16(2):183-192

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.  相似文献   

A higher-order σ-coordinate non-hydrostatic model for nonlinear surface waves     

Chih-Chieh Young  Jan-Tai Kuo 《Ocean Engineering》2007,34(10):1357-1370

A higher-order non-hydrostatic model in a σ-coordinate system is developed. The model uses an implicit finite difference scheme on a staggered grid to simultaneously solve the unsteady Navier-Stokes equations (NSE) with the free-surface boundary conditions. An integral method is applied to resolve the top-layer non-hydrostatic pressure, allowing for accurately resolving free-surface wave propagation. In contrast to the previous work, a higher-order spatial discretization is utilized to approximate the large horizontal pressure gradient due to steep surface waves or rapidly varying topographies. An efficient direct solver is developed to solve the resulting block hepta-diagonal matrix system. Accuracy of the new model is validated by linear and nonlinear standing waves and progressive waves. The model is then used to examine freak (extreme) waves. Features of downshifting focusing location and wave asymmetry characteristics are predicted on the temporal and spatial domains of a freak wave.  相似文献   

Reduction of sand demand for shore protection     

Arved J. Raudkivi  Hans-H. Dette   《Coastal Engineering》2002,45(3-4)

Beach nourishment is an environmentally preferred method of shore protection, but the annual sand requirement may lead to substantial maintenance costs. The shoreline processes, involving the surf zone, beach and dune, are reviewed with the aim of reducing the annual sand requirement of eroding shorelines. It is shown that surf zones with equilibrium profiles, on which the wave energy conversion is evenly distributed across the surf zone, from experience for given conditions indicate least loss of sand. On steep, eroding shorelines it may be difficult to establish an equilibrium profile. For such cases, the use of perched surf zones is recommended, which are supported at the seaward limit by an underwater sill. For reduction of littoral transport, the use of pervious pile groynes is recommended. These are arguably more efficient than impervious groynes. The sand loss from a usually dry beach by raised water levels is shown to be a function of the beach slope and is least when the storm waves at raised water levels do not cut an erosion escarpment. The loss of sand from a dune by infrequent severe storm tides can be prevented with the aid of a built-in membrane. These sand losses are usually large and constitute an uneconomic use of this sand resource. The proposed concepts and measures are linked to existing knowledge, augmented by data from the large wave flume (LWF) in Germany and field data from the North and Baltic Sea coasts.  相似文献   

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area     

Dong Soo Kim  Byoung Chul Lee 《Marine Georesources & Geotechnology》2005,23(1):117-136

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.  相似文献   

Effects of Irregular Wave Groups on Pile Forces     

Yang Zhengji Zuo Qihua Senior Engineer  River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing Engineer  River  Harbour Department  Nanjing Hydraulic Research Institute  Nanjing 《中国海洋工程》1991,(2)

The wave forces on 1, 2 and 4 vertical circular piles under the action of several wave trains of the same wave parameters, such as Hs,Tp and Mo, but different wave group factor GF are measured in the laboratory. After comparing these forces, it may be concluded that the mean and significant wave forces are almost of no difference for the wave trains with different GF. When GF is larger, the one-tenth of the wave froce extreme is slightly increased and the maximum wave force is much larger than the ones with smaller GF, to which attention must be paid in engineering practice.  相似文献   

深层搅拌法在超软弱港口地基上的工程应用     

曹永琅  毛元平  丛建 《海岸工程》2003,22(1):8-13

某港口堆场地基上部5．0m系吹填而成，地表下18m范围均属软土，经真空预压初级加固后地基承载力仅在80—90kPa，局部区域上部淤泥土层土性指标较差，含水量大于50％，地基承载力不足60kPa。为了使地基达到230kPa的承载要求，设计采用深层搅拌法加固超软弱地基。通过现场成桩工艺试验和检测表明，桩身水泥土强度在90d龄期时大于1．80MPa，单桩承载力标准值大于150kN，以φ600桩径、桩长13．5m、置换率为0．308和φ500桩径、桩长13．5m、置换率为0．267两种方案布置的复合地基承载力标准值均超过了230kPa的设计要求。试验结果表明，深层搅拌法在港口超软弱地基土应用只要施工工艺适当，完全可以使地基承载力提高2—3．5倍以土，从而节省大量的工程投资。  相似文献   

高精度CTD剖面仪研制过程中的专用设备   总被引：1，自引：1，他引：1  

王欣 《海洋技术学报》2001,20(1):140-142

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。  相似文献   

旧路改建高速公路中地基强夯效应测试与工艺参数分析   总被引：2，自引：1，他引：1  

吕国仁  崔新壮 《岩土力学》2008,29(9):2542-2546

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。  相似文献   

Effect of Multipoint Heterogeneity on Nonlinear Transformations for Geological Modeling： Porosity-Permeability Relations Revisited     

J A Vargas-Guzmán 《中国地质大学学报(英文版)》2008,19(1):85-92

An analysis of statistical expected values for transformations is performed in this study to quantify the effect of heterogeneity on spatial geological modeling and evaluations. Algebraic transformations are frequently applied to data from logging to allow for the modeling of geological properties. Transformations may be powers, products, and exponential operations which are commonly used in well-known relations (e.g., porosity-permeability transforms). The results of this study show that correct computations must account for residual transformation terms which arise due to lack of independence among heterogeneous geological properties. In the case of an exponential porosity-permeability transform, the values may be positive. This proves that a simple exponential model back-transformed from linear regression underestimates permeability. In the case of transformations involving two or more properties, residual terms may represent the contribution of heterogeneous components which occur when properties vary together, regardless of a pair-wise linear independence. A consequence of power- and product-transform models is that regression equationswithin those transformations need corrections via residual cumulants. A generalization of this result isthat transformations of multivariate spatial attributes require multiple-point random variable relations. This analysis provides practical solutions leading to a methodology for nonlinear modeling using correct back transformations in geology.  相似文献   

智能全站仪在大型压力容器焊接变形监测中的应用     

CHEN Ji-hua  JIANG Yan-yun  HUANG Jian-hua  CHU-hu 《测绘学院学报》2008,(3)

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。  相似文献