Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine     

ROY M. FRINGS  MAARTEN G. KLEINHANS  STEFAN VOLLMER 《Sedimentology》2008,55(6):1571-1593

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.  相似文献   

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

碳酸盐岩裂缝与岩溶作用研究   总被引：12，自引：2，他引：10  

艾合买提江·阿不都热和曼  钟建华  李阳  钟富平  高玉飞 《地质论评》2008,54(4):485-493

从构造与非构造作用角度出发,突出研究断层对裂缝的控制作用、断裂与岩溶的关系和裂缝与岩溶之间的关系,揭示碳酸盐岩裂缝与岩溶的发育规律。研究表明：构造裂缝为岩溶发育提供岩溶作用进行的有利通道,非构造裂缝则可以加速溶蚀作用的进行,促进岩溶的发育;裂缝与岩溶之间的关系始终是相辅相成、相互促进的关系。  相似文献   

华南前寒武系基底变质杂岩和中-新生代地幔岩的稀有气体同位素组成及其大地构造意义          下载免费PDF全文

谢窦克  邢光福  陆志刚  陈荣  周宇章 《地质科学》2008,43(1):175-204

对华南前寒武系变质岩浆杂岩稀有气体He、Ne、Ar和Xe的系统研究表明:扬子克拉通基底为含高³He的下地壳"原始岩石层",(³He/⁴He)×10^-6比值为2.8～4.6;而华夏板块基底变质岩浆杂岩则是在缺乏³He、低(³He/⁴He)×10^-8比值(3.15～17.7)的构造环境下形成的大陆中-上地壳变质岩浆杂岩层,反映出两者基底性质迥然不同。华南中-新生代爆破岩筒He同位素组成相反,相对稳定的扬子克拉通(³He/⁴He)×10^-8比值仅0.18～4.22,而郯庐-四会-吴川断裂以东,中-新生代活动地块(太平洋构造域)(³He/⁴He)×10^-8比值高达3.7～20.5。He同位素表明郯庐-四会-吴川断裂带为切割深至地幔的边界深大断裂,是扬子克拉通与华夏板块间的边界且控制了燕山期火山-侵入岩浆向西扩展。Ar同位素组成表明华南大陆中-新生代地幔形成接近"均一"的地幔组份。¹³⁶Xe/¹³⁰Xe-¹²⁹Xe/¹³⁰Xe相关组份表明它们具有地幔柱岩石同位素组成特征。  相似文献   

塔里木西部地区古生代断裂活动的方式和机制   总被引：15，自引：2，他引：13       下载免费PDF全文

李曰俊  吴根耀  孟庆龙  师骏  冯晓军  郑民 《地质科学》2008,43(4):727-745

基于系统的地震剖面解释及其与塔中地区的对比,本文探讨了塔里木西部地区古生代断裂活动的方式和机制。玛东断裂带是一条宽阔的北东向盖层滑脱型褶皱冲断带,前展式向东南扩展,冲断作用发生在奥陶纪末。巴东断裂(吐土休克Ⅱ号断裂)为北西向基底卷入型冲断带,奥陶纪末和中二叠世末发生冲断。巴西断裂和塔参2井南断裂是海西期的正断层。塔里木古板块古生代的发育受邻侧的造山带演化制约,近东西向和北东向断裂奥陶纪末的冲断是继承基底构造发育的。塔中地区的近北西向断裂是晚寒武世的新生断裂,加里东运动可分为两幕:奥陶纪末的冲断(艾比湖运动)和晚志留-中泥盆世的冲断-走滑,后者向西明显减弱。塔里木西部的部分北西向断裂(如康西断裂)可归入塔中北西向断裂系。北东向的玛东断裂带是其西的向北(东)冲断的吐木休克断裂带与其东的向南偏东冲断的塔中8-1井——塔中5井断裂带之间的调节断层。  相似文献   

库车坳陷大北地区下白垩统巴什基奇克组储层成因地质分挝   总被引：6，自引：0，他引：6       下载免费PDF全文

张荣虎  张惠良  寿建峰  沈扬  李昌 《地质科学》2008,43(3)

塔里木盆地库车坳陷大北地区白垩系巴什基奇克组储层以细一中粒岩屑砂岩为主夹少量长石岩屑砂岩,杂基为铁泥质和泥质(2%～10%).胶结物以方解石(3%～15%)为主.粘土矿物以伊利石、绿泥石和伊/蒙混层为主,不含高岭石,伊/蒙混层中的蒙皂石含量一般为(15～20)%;主要孔隙组合为残余原生粒问孔-溶蚀孔-微孔隙,占储集空间总量的(50～90)%,其次为构造缝-溶蚀孔,主要的孔隙类型为溶蚀孔和裂缝,总体属于低孔低渗-特低孔特低渗储层.综合分析认为:阶段性的前陆构造逆冲推覆作用对沉积旋回性、水体盐度变化及物源区距离变化的控制至关重要;构造活跃期扇三角洲前缘环境中形成的差分选中-粗砂岩、近源快速堆积造成的高岩屑含量、干旱成湖导致的高碳酸盐胶结和早成岩期相对深埋-后期持续快速深埋压实作用,是特低孔特低渗储层的主要成因;而较优质储层足构造平缓期辫状河三角洲前缘环境中形成的分选好的中-细砂岩、早期表生溶蚀及弱碳酸盐胶结作用、早期构造破裂的复合作用及其叠加效应的结果.  相似文献   

First results from the North Iceland experiment     

C. Riedel  A. Tryggvason  B. Brandsdottír  T. Dahm  R. Stéfansson  M. Hensch  R. Böðvarsson  K. S. Vogfjord  S. Jakobsdottír  T. Eken  R. Herber  J. Holmjarn  M. Schnese  M. Thölen  B. Hofmann  B. Sigurdsson  S. Winter 《Marine Geophysical Researches》2006,27(4):267-281

Between June 2004 and September 2004 a temporary seismic network was installed on the northern insular shelf of Iceland and onshore in north Iceland. The seismic setup aimed at resolving the subsurface structure and, thus, the geodynamical transition from Icelandic crust to typical oceanic crust along Kolbeinsey Ridge. The experiment recorded about 1,000 earthquakes. The region encloses the Tjörnes Fracture Zone containing the Husavik–Flatey strike-slip fault and the extensional seismic Grimsey Lineament. Most of the seismicity occurs in swarms offshore. Preliminary results reveal typical mid-ocean crust north of Grimsey and a heterogeneous structure with major velocity anomalies along the seismic lineaments and north–south trending subsurface features. Complementary bathymetric mapping highlight numerous extrusion features along the Grimsey Lineament and Kolbeinsey Ridge. The seismic dataset promises to deliver new insights into the tectonic framework for earthquakes in an extensional transform zone along the global mid-ocean ridge system.  相似文献   

松辽盆地西部张裂缝预测的应力场方法     

朱庆杰  朱而勤  尹万泉  吴战国 《中国海洋大学学报(自然科学版)》1995,(3)

以松辽盆地地质资料为基础，介绍了应力场和张裂缝预测的计算方法。通过了各种岩性的张破裂概率隶属函数，预测松辽盆地酉部张裂缝区的分布。据此，为今后的油气勘探提出了几点认识和建议。  相似文献   

辽东湾S2冰侧限剪切强度的试验研究   总被引：3，自引：0，他引：3  

李志军孟广琳  高树刚刘培林 《海洋工程》2002,20(1):20-23

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系  相似文献   

利用归一化层速度预测和研究储层物性的方法     

李刚 《海洋地质与第四纪地质》2003,23(1):125-129

归一化层速度是对任意深度处的层速度进行归一化处理的一种速度形式，归一化处理的目的是把任意深度处的层速度转换为与深度无关的格式，归一化后层速度的横向变化主要取决于地层岩性，孔隙度等物性的变化，利用这一特点可以方便地利用已知钻井资料对其进行标定，比较简单地进行地层岩性，孔隙度等特性的预测。实际应用表明，其预测结果与钻井揭示吻合较好，预测效果令人满意。  相似文献