四川旺苍大河坝浅变质岩型石墨矿床地球化学特征与成因分析     

段威  唐文春  黎龙昌  冉强  张飞  李小松  徐永胜 《现代地质》2021,35(3):599-607

大河坝石墨矿是川北米仓山南缘石墨矿带新发现的大型显晶质石墨矿床。研究了该矿床的地质特征和矿石主量、微量及稀土元素地球化学特征,结果表明:含矿岩层为副变质岩,矿区石墨矿体原岩沉积于缺氧的还原环境,原岩为一套含碳质黏土质细—粉砂岩及含碳质泥灰岩组合。微量元素特征指示矿体原岩由近海陆源碎屑物沉积形成,沉积水体主要为盐度较低的、混合不均匀的淡水—半咸水。矿石ΣREE平均值为150×10^-6,与泥灰岩相近;δCe值平均为0.91,呈弱负异常,δEu值平均为0.67,呈负异常,具滨海潮坪相沉积特征。含矿岩石δ¹³C值为-21.4‰~-19.0‰,平均为-19.86‰,表明成矿碳质来源主要为有机碳,并混合了部分无机碳。矿床成因类型为沉积变质型,其变质作用可能包括多次区域变质作用并叠加了混合岩化作用。  相似文献   

坦桑尼亚林迪地区纳钦圭阿石墨矿床地质特征及找矿模型     

杜菊民  陈春生  黄夕川 《江苏地质》2021,45(4):341-348

坦桑尼亚林迪地区是世界上重要的石墨成矿带,纳钦圭阿石墨矿是成矿带新发现的典型矿床之一。矿区分南北2个矿段,共圈定工业矿体17条,推断石墨矿物资源量>100万t,固定碳平均品位为4.05%。矿体赋存于石墨片岩-片麻岩中,呈层状、透镜状产出,走向北东—北北东,产状与围岩一致,矿体与围岩呈渐变过渡关系。矿石类型为石墨片岩-片麻岩型,矿石矿物为鳞片状石墨,脉石矿物主要为石英、长石、云母及少量金属矿物。矿石中片度≥147 μm（+100目）的石墨占94.43%,工业类型为大鳞片晶质石墨矿石。以视极化率6%为异常下限,共圈定4处激电异常,高极化率异常与低电阻率异常对应良好,探矿工程确定为矿体出露位置。该石墨矿的找矿模型：新元古代莫桑比克活动带中一套中高级副变质岩系为区域找矿标志,石墨片岩、石墨片麻岩露头为矿区找矿的直接标志,延伸方向与地层走向一致的条带状低阻、高极化异常带为地球物理找矿标志。该石墨矿的地质特征及找矿模型可作为在坦桑尼亚寻找同类矿床的参考。  相似文献   

石墨、萤石等战略非金属矿产发展趋势研究     

陈军元  刘艳飞  颜玲亚  高树学  欧阳友和  龙涛 《地球学报》2021,42(2):287-296

战略性新兴产业几乎或多或少都与非金属矿及其制品有关,随着战略性新兴产业的发展,我国战略性矿产资源消费将迎来快速增长期.本文选取石墨、萤石、高纯石英、叶蜡石四种非金属矿产为战略非金属矿产,收集其产量、消费量、贸易情况等资料,对其重要性及用途、供需情况等进行研究,并对其未来需求趋势进行预测.本文认为石墨、高纯石英、萤石、叶蜡石在战略性新兴产业中有重要应用,未来需求将呈快速增长趋势,其中石墨、萤石2030年需求量分别为138.7万t、567.9万t.为国家制定勘查投入及产业发展政策提供参考.  相似文献   

福建凤山矿区石墨矿地质特征及控矿因素分析     

程远慧 《中国煤炭地质》2021,(3):13-19

通过对福建省漳平市凤山矿区石墨矿近年来硐探、钻探等地质资料系统的梳理,在分析矿区地质特征和矿体特征的基础上,深入研究了石墨矿的控矿因素。研究认为该区石墨矿是由赋存于中二叠统童子岩组的无烟煤经过高温、高压作用进一步变质而成的。煤层受到岩浆热变质作用使碳物质(煤)分解,重新富集形成以隐晶质(土状)为主的隐晶质石墨矿,因此本区石墨矿的控矿因素是温度和构造。由于过往对福建煤系石墨资源的研究程度不够深入,造成大部分煤系石墨矿划归煤矿,致使石墨矿资源被浪费,本次通过野外地质勘查、采样样品测试等工作,确定了凤山矿区为煤系石墨矿,为下一步勘探工作提供有力依据,为合理开发利用矿产资源指明新的方向。  相似文献   

Geological characteristics and ore genesis of Houfangzi graphite deposit in Northwestern Hebei Province     

ZHANG Xingkang  FAN Yupeng  JIN Song  JIA Zhenghai 《中国地质调查》2021,7(6):20-26

Houfangzi graphite deposit is located in the middle of the graphite metallogenic belt in the northern margin of North China Block in Hebei Province, which belongs to regional metamorphic type graphite deposit. In this paper, through rock-mineral determination, IP ladder sections and exploratory trench survey, the authors have discussed its metallogenic geological characteristics and ore body characteristics, and analyzed its ore genesis. The research results show that the ore bodies are mainly in the graphitic marble of Dongjingzi Formation of Hongqiyingzi Group, which are stratified and controlled by layers, with NE trend and NNW inclination. The IP anomaly shows that Houfangzi graphite deposit is characterized by low resistance and high polarization. Ore bodies are stable and of big scale, and their fixed carbon content ranges from 1.42% to 3.28%, which has the potential to be a large graphite deposit. The ore-forming material came from granulite and graphite marble, while the regional metamorphism is the main mineralization of Houfangzi graphite deposit, with the enrichment and increasement caused by late magmatic activity and migmatization.  相似文献   

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach     

Tony Khalil  Nadia Saiyouri  Bogdan Muresan  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2013,37(5):491-502

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

热解石墨坩埚的应用     

张恩慈  吴贤欣 《岩矿测试》1990,9(2):138-141

本文介绍本院研制的热解石墨坩埚的特性和应用情况。该坩埚具有纯度高、致密、耐高温、耐强酸强碱腐蚀、易洗涤等特点,已广泛应用于矿物、建材、玻璃等方面试样的前处理。与铂、银、镍、刚玉、石英等坩埚比较,具有引入杂质少成本低等优点。  相似文献   

人造金刚石合成片中再结晶物质的空间分布     

贺义兴  郝兆印  王德荣  陈宇飞  王安平 《吉林大学学报(地球科学版)》1994,(3)

通过电子显微镜观察，发现金刚石合成片断面的再结晶物质具有分带现象，金刚石晶体出现于再结晶片－板状石墨亚带和枝状石墨亚带中，这一发现有助于深入探讨金刚石的生长条件和形成机理。  相似文献   

石墨炉塞曼原子吸收光谱法测定硅酸盐中微量砷     

张开莲  郑学娟 《矿物岩石》1990,10(1):110-113

本法采用氯酸钾-王水分解样品,选用硝酸镍作基体改进剂,提高了灰化温度。使用石墨杯原子化器,Zeeman效应扣除背景,实现了用石墨炉原子吸收法直接测定硅酸盐中微量砷。快速、简便,其绝对灵敏度达5.7×10~(-11)(g/l％),变动系数小于8％。  相似文献   

小体积萃取-石墨炉原子吸收法测定高纯硝酸钡中纳克级重金属元素     

董高翔  熊采华  汪康康  陈超英 《岩矿测试》1991,(4):287-290

本文研究了石墨炉原子吸收光谱法测定高纯硝酸钡中超痕量重金属元素的分析技术。提出在大量钡基体存在时,采用小体积萃取体系APDC-MIBK同时萃取纳克级的Fe、Cu、Co和Ni。该法具有灵敏度高、无干扰、操作方便和减少沾污等特点。方法检出限为:Fe 7.2ng/g、Cu 12.8ng/g、Co 4.4ng/g和Ni 6.7ng/g。应用于红外光纤原料硝酸钡、硝酸铝中痕量重金属的测定,效果良好。  相似文献