Discrete modelling of time‐dependent rockfill behaviour     

Claire Silvani  Thierry Désoyer  Stéphane Bonelli 《国际地质力学数值与分析法杂志》2009,33(5):665-685

This modelling study deals with the time‐dependent behaviour of rockfill media, which is of particular interest during the life of rockfill dams. Breakage of rock blocks and crack propagation are the main processes responsible for rockfill creep and collapse. The modelling procedure presented here is performed on two scales: on the rock block scale, where the grain is taken to be an assembly of rigid particles initially endowed with cohesive bonds, and on the rockfill scale, which is taken to involve a set of breakable grains interacting via contact and friction processes. The grain breakage process is described in term of a thermodynamically consistent damage interface model, where the damage is a gradual delayed process. This model was implemented in a non‐smooth contact dynamics code. The effects of the main parameters involved were analysed by performing numerical studies. The ability of the model to predict the creep behaviour of rockfill media is confirmed by presenting several simulations. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献   

低氧低分压环境下泡塑吸附-石墨炉原子吸收光谱法测定化探样品中的痕量金   总被引：2，自引：1，他引：1  

王祝  邵蓓  邬国栋  李明礼 《岩矿测试》2010,29(3):282-286

针对西藏低氧低分压环境下痕量金的测定,探讨了溶矿介质、解脱时间、吸附温度、Fe3+加入量等对测定结果的影响。确定了最佳测定条件,并较详细讨论了Fe3+在溶矿和吸附过程中的重要作用。方法检出限为0.102 ng/g,测定范围为0.24~300 ng/g,准确度(ΔlgC,n=12)为0.01~0.03,精密度(RSD,n=12)为1.61%~7.33%,很好地解决了西藏地区低氧低分压低温环境下痕量金测定的技术难题。  相似文献   

珠江口盆地荔湾井区珠江组深水扇沉积特征   总被引：4，自引：1，他引：3       下载免费PDF全文

王昌勇郑荣才  高博禹朱国金  胡晓庆李 云 《中国地质》2010,37(6):1628-1637

珠江口盆地白云凹陷荔湾深水区为油气勘探有利区域,通过岩石学和古生物组合特征研究,认为该区珠江组下部属于典型的深水扇沉积,可划分为早期盆地扇和晚期斜坡扇两种类型,两类深水扇都以发育颗粒流、砂质碎屑流及低密度浊流等顺坡重力流沉积为主,同时夹有少量内波和等深流等深水牵引流改造沉积。砂质碎屑流为两类深水扇水道砂体的主要沉积类型,发育有逆-正粒序层理、平行层理和水平层理,粒序层内可见各种丰富的液化变形和生物逃逸构造,而水平层内发育有更多的生物钻孔和扰动现象。两类深水扇的沉积构造和古生物特征有明显差异,其中盆地扇水道砂岩中普遍含硅质小砾石,水道间泥岩中含有较多保存完好的抱球虫化石,斜坡扇水道砂岩以富含炭泥屑为典型特征,水道间泥岩含有更丰富的颗石藻和抱球虫化石,其中部分抱球虫和颗石具有遭受海底溶蚀作用的现象,指示斜坡扇相对盆地扇有更大的水体深度。平面上两类深水扇具有相似的重力流沉积的分带性,都具有自陆架坡折向盆地方向由颗粒流沉积逐渐向砂质碎屑流和近源高密度浊流、远源低密度浊流等单向演化的特点。  相似文献   

大宗急缺矿产和战略性新兴产业矿产调查工程进展与主要成果          下载免费PDF全文

王登红  郑绵平  王成辉  高树学  商朋强  杨献忠  樊兴涛  孙艳 《中国地质调查》2014,6(6):1-11

钾盐是关乎国计民生的大宗急缺矿产; 稀有金属、稀土金属、稀散金属、萤石、晶质石墨、金刚石等矿产是国内外公认的战略性新兴矿产。根据国家建设的需求,2015年中国地质调查局设立了“大宗急缺矿产和战略性新兴产业矿产调查工程”。该工程以查明重要矿种的资源潜力,取得找矿突破为目标,以矿调为手段,以“五位一体”为部署原则,进行了全国重点地区大型资源基地和重要矿集区相关矿种的成矿规律和找矿方法创新研究,同时开展了矿产资源的综合利用研究。经过3年的努力已取得了一批找矿成果,丰富了成矿理论,创新了找矿方法,支撑了赣南、闽西等革命老区脱贫攻坚,带动了川西等地区的经济发展,对保障国家农业安全和战略性新兴产业顺利发展发挥了积极作用。概要介绍了在钾盐找矿、华南“三稀”金属矿产调查、川西大型锂矿资源基地建设、新疆奇台超大型晶质石墨矿找矿等方面取得的新进展; 介绍了在华南、华北、中西部等主要成矿带“三稀”矿产、晶质石墨、萤石等关键矿种成矿规律研究、成矿模式构建、资源潜力评价、重点靶区优选、技术方法组合等方面取得的成果; 介绍了在公益性基础性调查研究中所起到的示范引领作用。钾盐“二层楼”成矿模式和锂矿“五层楼+地下室层脉组合”成矿理论和找矿模型得以完善,新发现靶区40处,矿产地14处,大型资源基地2处,新增KCl资源量3.5亿t,伟晶岩型锂资源量31.75万t,铍资源量1.6万t,石墨资源量7 378万t,脉石英56万t,萤石1 159万t,金刚石资源量2.29万克拉,新增重稀土资源量12万t,含磷锂铝石岩体型锂资源量38万t。该工程取得的进展与成果对保障国家资源安全和战略性新兴产业的顺利发展具有重要的现实意义。  相似文献   

河北省尚义县松树沟石墨矿矿床地球化学特征及成因分析          下载免费PDF全文

王广  齐新国  付茂英  田腾飞 《中国地质调查》2014,6(6):29-34

以河北省尚义县松树沟石墨矿的地球化学特征数据为基础,通过与内蒙古兴和石墨矿床进行对比,探究矿床成矿环境,进而分析其矿床成因。岩石学和地球化学分析结果表明: 松树沟石墨矿赋矿层位为集宁岩群下白窑岩组,矿石类型为黑云斜长变粒岩石墨矿石,工业类型为晶质鳞片状石墨; 岩石地球化学特征为高硅、高铝、低碱,具有孔兹岩系特征; 原岩形成在缺氧的弱还原环境,具铕负异常特征; 其变质原岩为富碳质和富铝质的泥质碎屑岩,原岩沉积环境总体为准稳定地理环境,岩石通过区域变质作用形成晶质石墨矿床。对松树沟石墨矿床地质特征和区域成矿规律的研究成果,对区域找矿工作具有重要的参考意义。  相似文献   

吉林省集安地区晶质石墨矿矿床特征及找矿标志     

张强  刘帅 《吉林地质》2014,(3)

吉林省集安地区是晶质石墨矿的主要产地,晶质石墨矿矿床赋存于集安群荒岔沟组中,层控特征明显,同时也是其直接找矿标志。  相似文献   

An enhanced constitutive model for crushable granular materials     

Ali Daouadji  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2010,34(6):555-580

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

A virtual experiment technique on the elementary behaviour of granular materials with discrete element method     

Xia Li  Hai‐Sui Yu  Xiang‐Song Li 《国际地质力学数值与分析法杂志》2013,37(1):75-96

Multi‐scale investigations aided by the discrete element method (DEM) play a vital role for current state‐of‐the‐art research on the elementary behaviour of granular materials. Similar to laboratory tests, there are three important aspects to be considered carefully, which are the proper stress/strain definition and measurement, the application of target loading paths and the designed experiment setup, to be addressed in the present paper. Considering the volume sensitive characteristics of granular materials, in the proposed technique, the deformation of the tested specimen is controlled and measured by deformation gradient tensor involving both the undeformed configuration and the current configuration. Definitions of Biot strain and Cauchy stress are adopted. The expressions of them in terms of contact forces and particle displacements, respectively, are derived. The boundary of the tested specimen consists of rigid massless planar units. It is suggested that the representative element uses a convex polyhedral (polygonal) shape to minimize possible boundary arching effects. General loading paths are described by directly specifying the changes in the stress/strain invariants or directions. Loading can be applied in the strain‐controlled mode by specifying the translations and rotations of the boundary units, or in the stress‐controlled mode by using a servo‐control mechanism, or in the combination of the two methods to realize mixed boundary conditions. Taking the simulation results as the natural consequences originated from a complex system, virtual experiments provide particle‐scale information database to conduct multi‐scale investigations for better understanding in granular material behaviours and possible development of the constitutive theories provided the qualitative similarity between the simulation results from virtual experiments and observations on real material behaviour. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Determination of the constriction size distribution of granular filters by filtration tests     

J. Sjah  E. Vincens 《国际地质力学数值与分析法杂志》2013,37(10):1231-1246

This paper presents the calibration of an experiment based on filtration tests, able to provide the cumulative constriction size distribution of granular materials. Here, simulations of these tests are performed using a discrete element method. Filters of same density but different thicknesses are created with a poly‐sized spherical material. Lateral periodic boundaries for the samples are used, and their size is calibrated so that a representative elementary volume is obtained. Fine particles are released on the created samples, and the particle size distribution of the collected material that successfully crossed the filters is computed. These particle size distributions are related to the underlying cumulative constriction size distribution (CSD) of the granular material involved in the samples. The CSD is derived using a probabilistic approach for the path length of individual particles through a granular material. We settle all the requisites related to the technique and to the fine particles that are released to allow reaching a correct CSD for the filter. The reference CSD used for the calibration of the experiment is obtained after a radical partition of the void space into Delaunay tetrahedra and a geometrical characterisation of constrictions on each tetrahedron face. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

强质子耀斑活动区的形态和旋转特征     

周树荣 《中国天文和天体物理学报》1996,(3)

本文研究结果表明：同一黑子群在日面期间的顺或反时针方向的旋转运动会先后并存．质子耀斑前1～2无，黑子群的旋转角速度达到极大．耀斑后，磁绳的松弛，黑子群可能会反向旋转，强的剪切过程和质子耀斑可能会再度出现．强质子耀斑活动区的共同特征是：（1）形态为单个团状结构δ型黑子，即众多异极性本影核紧锁在同一黑子半影中；（2）黑子面积＞1000×10－6半球面积，日面跨度＞10°；（3）黑子群都有快速的旋转运动．这类活动区，如果在日面西部活动性明显地增强，那么这个活动区在未来转到日面边缘及其背后、或再次从日面东边缘转出时，定能再次爆发耀斑和伴随较强质子事件。  相似文献