最不利地震动在网壳结构抗震设计中的应用   总被引：3，自引：0，他引：3  

范峰  钱宏亮  谢礼立 《世界地震工程》2003,19(3):17-21

利用文献提供的最不利地震动，对网壳结构等大跨空间结构进行了分析，分别考察了仅水平输入和三向地震波输入的两种情况，对最不利地震动在网壳结构抗震设计中的适用性进行了探讨，并在一实际工程设计中进行了应用。大跨度空间结构在水平地震动输入时，宜按照的最不利地震动进行设计；在三向地震动同时输入时，应同时分别按所推荐最不利设计地震动和按常规选用的地震动，对大跨度空间结构进行抗震分析。  相似文献   

Optimum multiple tuned mass dampers for structures under the ground acceleration based on the uniform distribution of system parameters     

Chunxiang Li  Yanxia Liu 《地震工程与结构动力学》2003,32(5):671-690

The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

青藏铁路管道通风试验路基地温变化及热状况分析   总被引：3，自引：6，他引：3  

牛富俊  俞祁浩  赖远明 《冰川冻土》2003,25(6):614-620

基于青藏铁路北麓河试验段管道通风路基在2个冻融循环周期内的地温监测资料，分析了路基温度的发展、温度场分布特征及多年冻土的热流量变化．结果表明：通风管埋设于路堤中部的路基温度变化和发展情况与一般路基类似，路基在施工后的2个冻融周期内仍处于整体升温的过程；通风管埋设于路堤下部的路基，虽然前2个冻融循环周期内土体温度与原始状态相比同样有所升高，但开始出现逐渐降低的趋势，同时地温场的分布在横向上的对称性也比较好，在热交换方面，一般填土路基和通风管位于路堤中部的路基在施工后的前2个冻融循环周期内一直处于吸热过程，而通风管位于路堤下部的路基在经历了第1个周期的持续吸热过程后，在第2个冻融循环周期内已经开始放热。  相似文献   

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys     

S. A. Gil-Zepeda  J. C. Montalvo-Arrieta  R. Vai  F. J. Snchez-Sesma 《Soil Dynamics and Earthquake Engineering》2003,23(1):77-86

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.  相似文献   

Classification of artificial (man-made) ground   总被引：1，自引：0，他引：1  

M. S. Rosenbaum  A. A. McMillan  J. H. Powell  A. H. Cooper  M. G. Culshaw  K. J. Northmore 《Engineering Geology》2003,69(3-4):399-409

The legacy inherited from anthropogenic processes needs to be addressed in order to provide reliable and up-to-date ground information relevant to development and regeneration in the urban environment. The legacy includes voids as well as anthropogenic deposits (artificial ground). Their characteristics derive from former quarrying and mining activities industrial processes creating derelict ground, variably consolidated made ground, and contaminated groundwater and soils. All need to be systematically assessed to inform the planning process and provide the basis for engineering solutions. Site-specific investigation needs to be conducted on the back of good quality geoscientific data. This comes from ‘field’ survey, remotely sensed data interpretation, historical maps, soil geochemical sampling, and geotechnical investigation. Three-dimensional and, in the future, four dimensional, characterization of superficial deposits is required to reach an understanding of the potential spatial lithological variability of artificial ground and the geometry of important surfaces, i.e. the boundary conditions. The classification scheme for artificial ground outlined in this paper and adopted by the British Geological Survey, will help in achieving this understanding.  相似文献   

锤击沉管碎石桩处理液化地基的工程实践     

李兴武  宋任平  罗旭辉 《岩土力学》2003,(Z1)

结合实际工程,对锤击沉管碎石桩加固处理液化地基的设计、施工控制及处理效果进行了系统论述,对碎石桩设计、施工中遇到的若干问题提出了建议。  相似文献   

岩体断层基础加固与溶洞灌浆处理中的高压灌浆技术     

陈昊 《岩土力学》2003,(Z1)

阐述了在岩体断层加固和溶洞处理中的高压灌浆技术,分析了高压灌浆的作用机理,灌浆压力控制的方法,介绍了高压灌浆在水利枢纽工程上的应用效果。  相似文献   

盾构隧道壁后注浆效果的雷达探测研究   总被引：15，自引：2，他引：15  

黄宏伟  刘遹剑  谢雄耀 《岩土力学》2003,(Z2)

盾构隧道的纵向力学与变形性态研究,尤其是盾尾壁后注浆效果已经引起国内外学者的广泛关注,笔者首次利用探地雷达方法,对上海某盾构隧道盾尾壁后注浆分布进行探测,并进行了初步的分析,结果表明,利用该方法可有效地探测隧道壁后的注浆分布,为隧道纵向力学变形性态的控制提供一定依据。  相似文献   

软粘土层上的油罐差异沉降     

徐光明  王铁儒  易进栋 《岩土力学》2003,(Z2)

根据某一大型油罐软基加固处理工程方案设计和优选需要,按照离心模型相似律,开展了三组模型试验,分别模拟了天然地基、土工合成材料袋装碎石垫层和既在填土层中设置袋装碎石垫层又在淤泥质粘土层设置土工合成材料排水板三种情况,以研究这一加固布置形式对减小高压缩性软土层地基上油罐罐底的差异沉降效果反应。模型油罐地基采用原型土重塑制备,现场土工合成材料袋装碎石采用柔性机织玻璃纤维细管塞装粗砂条模拟,并在不停机运转条件下模拟了多次充放水预压加载。试验结果表明,油罐软弱地基经土工合成材料袋装碎石加固后,罐底总沉降值和差异沉降值均明显小于天然地基情形下对应的沉降值,罐底畸变得到显著减小,就本文所述的土质条件、土层厚度和预压荷载强度,地基经加固处理后,油罐罐底畸变减小了近50 %。最后就土工合成材料在加固油罐地基布置形式的合理性进行了初步探讨。  相似文献