裂缝参数对考虑滑脱效应页岩气水平井产能的影响     

梁冰  代媛媛  陈天宇  孙维吉  秦冰 《煤田地质与勘探》2015,43(2):44-47

低渗透页岩气藏中,气体渗流时会受滑脱效应的影响。建立了考虑滑脱效应的气、水两相页岩气藏渗流数学模型,并建立了理想地质模型,采用数值模拟方法,研究了水力压裂的不同裂缝参数对水平井产能的影响。模拟结果表明:裂缝条数、长度和间距是影响页岩气井产能的重要参数,而裂缝宽度和渗透率对产能的影响相对较弱;页岩气井的产能随着裂缝条数和裂缝长度的增加而增大;水平井的水平段长度及裂缝条数一定时,可通过增大裂缝间距来减少裂缝间的相互干扰。   相似文献   

Bottom topography,recent sedimentation and water volume of the Cerro Prieto Dam,NE Mexico     

《Geofísica Internacional》2014,53(1):27-38

The Cerro Prieto dam, a relatively small water reservoir in NE Mexico, is one of the main resources of potable water for Monterrey, a city with a population of about four million inhabitants. A high resolution seismic study using non-linear parametric sub-bottom echo-sounder SES-2000 was carried out in this water reservoir. High resolution acoustic data interpretation shows that the thickness of recent sediments due to siltation of the reservoir reaches 3.5-4.0 m. It shows a high recent sedimentation rate (1-2 up to 14 cm/ year). Based on the echo-sounder data, the first bathymetric map and a digital model of recent sediment thickness were designed. A significant (5-12%) difference between the volume capacity value used by National Commission of Water (CNA) and acoustic survey results was revealed. Differences between the CNA and acoustic data indicate storage losses from 12-17 up to 30 million cubic meters. The results obtained through study such as this one, could be useful to improve a water resources management.  相似文献   

Out‐of‐plane stability of buckling‐restrained braces including moment transfer capacity          下载免费PDF全文

Toru Takeuchi  Hitoshi Ozaki  Ryota Matsui  Fatih Sutcu 《地震工程与结构动力学》2014,43(6):851-869

Buckling‐restrained braces (BRBs) are widely used as ductile seismic‐resistant and energy‐dissipating structural members in seismic regions. Although BRBs are expected to exhibit stable hysteresis under cyclic axial loading, one of the key limit states is global flexural buckling, which can produce an undesirable response. Many prior studies have indicated the possibility of global buckling of a BRB before its core yields owing to connection failure. In this paper, BRB stability concepts are presented, including their bending‐moment transfer capacity at restrainer ends for various connection stiffness values with initial out‐of‐plane drifts, and a unified simple equation set for ensuring BRB stability is proposed. Moreover, a series of cyclic loading tests with initial out‐of‐plane drifts are conducted, and the results are compared with those of the proposed equations. © 2013 The Authors. Earthquake Engineering & Structural Dynamics published by John Wiley & Sons Ltd.  相似文献   

Seismic design and testing of the bottom vertical boundary elements in steel plate shear walls. Part 1: design methodology          下载免费PDF全文

Keh‐Chyuan Tsai  Chao‐Hsien Li  Hung‐Chi Lee 《地震工程与结构动力学》2014,43(15):2237-2259

This research investigates the seismic design method and the cyclic inelastic behavior of the bottom column, also called the vertical boundary element (VBE), in steel plate shear walls (SPSWs). This study consists of two parts. This Part 1 paper discusses the anticipated pushover responses for properly designed SPSWs and the possible inelastic responses of the bottom VBE at various levels of inter‐story drift. Considering both the tension field action of the infill panel and the sway action of the boundary frame, this study develops a simplified method to compute the flexural and shear demands in the bottom VBE. Based on the superposition method, this approach considers various plastic hinge forming locations at different levels of inter‐story drift. One of the key performance‐based design objectives is to ensure that the top ends of the bottom VBEs remain elastic when the SPSWs are subjected to the maximum considered earthquake. This paper presents the comprehensive design procedures for the bottom VBE. Furthermore, this study conducted cyclic performance evaluation tests of three full‐scale two‐story SPSWs at the Taiwan National Center for Research on Earthquake Engineering in 2011 to validate the effectiveness of the proposed design methods. The experimental program, cyclic inelastic responses of the SPSWs and bottom VBEs, and numerical simulations are presented in Part 2. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

腾冲地区潜热通量与周围地区地震活动的相关性   总被引：1，自引：0，他引：1       下载免费PDF全文

陈梅花  邓志辉  梁琦珍  丁留伟  陶京玲 《地震地质》2014,36(2):422-433

以2000年以来6.4级以上地震为例,研究了腾冲地区潜热通量（SLHF）在这些震例发生前后的变化特征。结果表明：腾冲地区的SLHF动态,不但在其附近发生强地震前常出现异常,而且对周边较远的强地震前也会发生异常反应;异常出现时间大都在震前1个半月以内,汶川地震前异常出现较早,发生在震前2个月之前,这可能与汶川地震震级高影响范围大有关;异常幅值与震级有关,震级越大,异常表现越强。 比如芦山7.0级地震、缅甸7.0级地震和汶川M_S 8.0地震前,腾冲地区SLHF异常幅度很大,远远超过最大参考值,而姚安6.5级地震和宁洱6.4级地震前异常幅度就相对小一些。腾冲地区SLHF异常与周围强地震的发生有较好的相关性,一方面与腾冲地区的活动断裂发育、现今构造变形强烈有关,另一方面可能是由于腾冲地区火山活动强烈,温泉广泛发育,水热交换迅速,对周边构造活动感应灵敏所致。  相似文献   

Cometabolic Degradation Kinetics of Trichloroethylene Based on Toluene Enhancement by Encapsulated Burkholderia cepacia G4          下载免费PDF全文

Shanawar Hamid  Muhammad T. Amin  Abdulrahman A. Alazba  Umair Manzoor  Muhammad N. Amin 《洁净——土壤、空气、水》2014,42(11):1642-1649

  相似文献   

混凝土的入模温度和水化热对青藏直流输电线路冻土桩基温度特性的影响     

陈赵育  李国玉  穆彦虎  俞祁浩  毛云程  王飞 《冰川冻土》2014,36(4):818-827

施工过程中混凝土的入模温度和水化热对多年冻土区桩基施工期间的热稳定性具有重要影响. 针对该问题,利用有限元方法定量研究了±400 kV青藏直流输电线路冻土区锥柱基础入模温度、水化热和含冰量对桩基回冻过程、温度场变化和桩底融化深度的影响规律. 结果表明：水化热影响下,桩基中心温度在第3天达到最高,桩底滞后1 d,基坑表面受其影响较小,主要受环境温度影响;第24天,桩底出现最大融化层,随着入模温度增加,融化层厚度相应增加,入模温度为6℃时融化层厚度为34 cm,15℃时为55 cm;入模温度越高,回冻时间越长,当入模温度为6℃时,完全回冻需经历52 d,15℃时,回冻时间将增加7 d. 含冰量对桩底融化深度有影响,含冰量越大底部融化深度越小;冻土年平均地温是影响桩底融化深度的重要因素,少冰高温（-0.52℃）、低温（-1.5℃和-2.5℃）冻土条件下,最大融化层厚度分别为38 cm、34 cm和25 cm. 基于上述结果,在多年冻土地区的桩基工程,建议混凝土入模温度为6~8℃,底部碎石垫层至少40 cm.  相似文献   

基于水-热-力耦合模型的钻孔灌注桩承载力影响因素分析     

刘乃飞  李宁  何敏  徐栓海 《冰川冻土》2014,36(6):1471-1478

针对广大寒区普遍存在的冻胀-融沉影响桩基承载力问题, 以清水河大桥灌注桩为例, 基于建立的饱和冻土水-热-力三场耦合模型及研发的3G2012软件系统, 深入研究了温度变幅、桩和地基土的传导系数、导水系数、回冻时间等因素对其承载力的影响, 揭示了其承载的内在热力学机理. 结果表明: 钻孔灌注桩承载力随温度发生波动变化, 冬季桩基的极限承载力近似为夏季的1.2倍; 地基的导水系数提高一个数量级, 加剧了地基土中的水分迁移及冻胀融沉变形, 进而影响桩基承载力; 冻土回冻时间对桩基承载力也有较大影响. 以上结论为寒区岩土工程的设计与施工提供量化的科学依据.  相似文献   

让压锚索在边坡支护中的应用试验研究及摩阻力问题的探讨     

汪波  徐建强  吴正恺  朱安龙  王勇 《岩土力学》2014,35(12):3370-3376

为研究让压锚索在边坡支护中的自身让压特性,获取让压实测资料,以江西洪屏电站高边坡为工程背景,结合图强工程材料有限公司研发的新型让压锚索,针对不同锚索长度、自由段长度等各种工况进行了现场试验,试验表明：在让压锚索张拉过程中,部分锚索出现了让压滑移现象,让压效果显著;但让压时,长锚索孔口张拉力与设计基础让压力相差很大,说明锚索孔口张拉力并未如理想状态那样全部传递给锚孔内部的锚索,而是很大一部分孔口拉力将用来克服锚索与锚孔之间的摩阻力,且量值上已达到不容忽视的程度。试验同时揭示了锚索长度、锚固长度、锚束及锚孔施工质量对摩阻力的大小起到关键性影响,锚索长度、自由段长度越长、锚束越多、锚孔质量越差,则摩阻力越大。并据此提出了未来边坡防护锚索设计中重点关注及有待于进一步研究的内容。  相似文献   

基于综合变异系数的地基承载力可靠性分析   总被引：2，自引：0，他引：2  

曹宇春  刘富玲 《岩土力学》2014,35(7):1950-1956

采用一次二阶矩法,考虑岩土参量变异系数的试验及历史数据,提出了基于综合变异系数的地基承载力简化可靠性与风险分析方法。利用提出的简化可靠性与风险分析方法,可在传统确定性分析的基础上,采用合理的变异系数,分别得到与地基承载力有关的可靠度、破坏概率和平均期望损失的最可能值及其变化范围,为提出优化的地基基础设计方案和工程决策奠定基础;相对于土重度和黏聚力,地基承载力可靠度对于内摩擦角的变化更加敏感;设计时可以综合考虑所需的安全系数、可靠度和破坏概率,确定合适的基础宽度或基底面积。当地基土的场地勘察统计结果的变异系数权重逐渐增加时,综合变异系数不断减小,其相应的地基承载力的可靠度逐渐增加,而相应的破坏概率逐渐减少。  相似文献