基于载波相位的GPS周跳恢复方法研究     

吕振扬  刘伯鸿  伏玉明 《测绘工程》2016,25(1)

在GPS定位中,周跳的探测和修复是获得高精度定位结果的前提。针对载波相位周跳数据的探测和修复这一问题已经提出了很多方法,但都有各自的不足之处。文中针对恶劣环境下的载波相位定位问题,通过使用多个历元的数据构建方程,提出一种新的整周模糊度定义方法,并预期能够在仅有3颗可用卫星且周跳发生时实现快速、准确的定位。  相似文献   

结合投影变换和相位相关的海冰运动监测     

胡迎迎  郎文辉  张盼  杨学志 《遥感学报》2016,20(4):579-589

为提高对渤海海冰旋转和平移运动的监测精度,提出一种基于投影变换的相位相关跟踪方法。选取连续8景静止水色成像仪(GOCI)图像序列,根据特征图像窗口的投影变换构造辅助函数,通过寻求函数最优解得到旋转角度集合,选择修正相关系数确定最佳旋转角度,同时根据相位信息实现海冰样本间亚像素级别的平移跟踪,消除传统相位相关法中因忽略图像相频特性所造成的匹配误差。实验结果表明,以手动测量的旋转角度为基准,该方法和传统相位相关法的旋转监测均方根误差的最大值/平均值分别为0.59/0.50与1.41/0.94,跟踪速度提高了50.6%;海冰平移运动的速度矢量与辽东湾的现场实测数据及历史资料记录数据基本一致。该方法对渤海海冰旋转和平移运动具有较好的跟踪效果。  相似文献   

中国北方三流域河流—沙漠过渡带地表沉积物化学元素空间差异分析     

李小妹  严平  吴伟  钱瑶 《沉积学报》2016,34(4):615-625

通过对克里雅河、毛布拉格孔兑以及西拉木伦河三流域的河流-沙漠过渡带地表沉积物的7种常量氧化物以及15种微量元素进行因子分析,结果显示:三个流域之间或不同河段因子分析提取的公因子均可以概括为较稳定的铁锰矿物、较不稳定的长石类和方解石（白云石）类等硅酸盐矿物以及稳定的稀土元素和重矿物等类别;河流间因子分析结果表明,自西向东三个流域沿河地表沉积物的化学元素富集与迁移程度呈递增趋势,化学风化程度增强;流域内因子分析结果表明,自上游至下游,样点化学组成均愈变复杂,不同河段或不同河岸沉积物化学元素空间分布规律与其物源、地貌格局以及水分条件等因素有关;自河床至阶地,不同地貌单元地表沉积物化学元素呈相异的递变规律,这与在距离河道远近不同,物源、动力因素的分配不同有关。  相似文献   

高压下天然菱铁矿的压缩性和电子结构研究     

高静  巫翔  秦善  张硕  杨科  李晓东 《岩石矿物学杂志》2016,35(2):276-282

采用同步辐射光源和金刚石对顶砧(DAC)技术,对天然菱铁矿的压缩性和电子结构进行了原位X射线衍射(XRD)和X射线吸收近边结构谱(XANES)测试研究。在室温下随着压力逐渐升高至50.2 GPa,菱铁矿保持方解石型结构不变,但是逐渐向Na Cl型结构转变;刚性[CO3]2-基团平行于ab-平面定向排列使c轴的压缩性大于a轴。菱铁矿在44.6~47.1 GPa之间发生电子由高自旋态(HS)向低自旋态(LS)的转变,表现为体积塌陷8%。HS菱铁矿的等温状态方程参数为K0=112(5)GPa和K'0=4.6(3)。首次采用XANES技术对菱铁矿中Fe2+的电子结构进行了研究,结果表明:随着压力升高至37.3 GPa,Fe2+的配位和局域对称并未发生明显变化;此后电子结构开始转变,Fe2+的3d轨道分裂能降低,电子跃迁概率增大,呈现LS特性。  相似文献   

涉及埃达克岩实验的若干基本概念与问题辨析     

汪洋 《岩石矿物学杂志》2016,35(1):162-176

根据热力学原理,部分熔融是相变的一种表现形式。当岩石沿p-T轨迹穿过固相线时即可发生熔融。自然界岩石常见的不一致熔融行为可以导致残留相具有不同于源岩的整体成分与矿物组合。残留相与源岩可以属于不同的变质相,岩性也可以不同。"C型埃达克岩"含有含水矿物,它们不是干体系熔融的产物。实验岩石学研究表明,基性成分(SiO_250%)体系较中性、酸性体系在1.0~2.0 GPa压力条件下失水熔融时更易于形成"榴辉岩质"的残留相。源岩除SiO_2以外的其它主要氧化物会影响残留相中各矿物的比例,进而影响熔体的Sr、Y及HREE含量。因此,"C型埃达克岩"高Sr低HREE特征的形成取决于熔融温压条件以及源岩的主量元素、微量元素组成等多重因素。高钾含量(K_2O≈1.0%)的基性、中基性源岩形成的熔体成分与"C型埃达克岩"相比过于富Al或富Na。中等富钾的基性源岩的低程度熔融可以形成高硅的"C型埃达克岩",但无法形成中性的"C型埃达克岩"。  相似文献   

深孔用高钢级绳索取心钻杆分区热处理工艺试验研究          下载免费PDF全文

彭莉  梁健  蔡纪雄  杨金东  孙环平  孙建华 《探矿工程》2016,43(9):14-19

为改善绳索取心钻杆受力工况,延长钻杆使用寿命,满足深孔及特深孔钻探施工要求,开展了对绳索取心钻杆体进行分区热处理工艺的试验研究。试验选用高钢级薄壁管材,通过对钻杆两端300 mm左右的区间内进行盐浴淬火及高温回火处理,保证了调质区域的机械性能,硬度和金相组织均匀性良好,同时热处理过渡带影响区域小。试制加工的特深孔绳索取心钻杆具有两端部螺纹连接段刚性强、杆体中部韧性好的特点。该钻杆在山东莱州西岭村矿区完成了2845.55 m深孔的钻进施工,使用情况良好。  相似文献   

固相吸附毒素跟踪技术(SPATT)在浙江南麂海域的应用     

渠佩佩  杨晶晶  徐轶肖  高寒  佟蒙蒙 《海洋与湖沼》2016,47(4):795-803

浙江南麂岛海域是我国近岸贝类的重点养殖区,近年来一直遭受脂溶性贝类毒素(lipophilic shellfish toxins,LSTs)的污染,威胁着人类健康。为了建立有效的食品安全预警方法,本研究利用固相吸附毒素跟踪技术(solid phase adsorption toxin tracking,SPATT)在该海域进行了为期一年的野外监测和LSTs毒素分析。结果表明:7种LSTs毒素在SPATT(DIAION?HP20)中被检出,分别是大田软海绵酸(okadaic acid,OA)、鳍藻毒素-1(dinophysistoxin-1,DTX-1)、虾夷扇贝毒素(yessotoxin,YTX)及其衍生物homo YTX、扇贝毒素-2(pectenotoxin-2,PTX-2)及其衍生物7-epi-PTX2sa和环亚胺毒素(gymnodimine,GYM);有8种毒素在厚壳贻贝(Mytilus galloprovincialis)中被检出,分别是OA、DTX1、homo YTX、PTX2、7-epi-PTX2sa、GYM、原多甲藻酸贝类毒素-3(azaspiracid-3,AZA-3)和虾夷扇贝毒素衍生物45-OH-homo YTX。整体而言,SPATT(HP20)中吸附的毒素种类与贝肉中监测出的毒素种类大体上一致,且两者间OA、DTX1和PTX2的浓度在时间上具有较好的相关性,可见SPATT(HP20)对这些LSTs毒素具有较高的灵敏度,有望作为水体中LSTs毒素的预警监测材料。南麂岛海域LSTs分布特征明显,夏季最高,其次是春秋季,冬季最低,其中2014年夏季贝肉中OA毒素含量高达77.19ng/g贝肉,超出国家限量标准(45ng/g贝肉)比例达11.76%,为浙江南麂海域贻贝的食用安全带来隐患。  相似文献   

Stability and capsizing analysis of nonlinear ship rolling in wind and stochastic beam seas     

《Applied Ocean Research》2016

Considering the actual seaway condition, stability and capsizing of nonlinear ship rolling system in stochastic beam seas is of significant importance for voyage safety. Safe zone are defined in the phase space plan of the unperturbed Hamilton system to qualitatively distinguish ship motions as capsize and noncapsize. Capsize events are defined by solutions passing out of the safe zone. The probability of such an occurrence is studied by virtue of the random Melnikov function and the concept of phase space flux. In this paper, besides conventional wave excitation, the effect of wind load is also taken into account. The introduction of wind load will lead to asymmetry, in other words, it transforms the symmetric heteroclinic orbits into asymmetric homoclinic orbits. For asymmetric dynamical system, the orbital analytic solutions and its power spectrum are not readily available, and the technique of discrete time Fourier transformation (DTFT) is used. In the end, as verification of theoretical critical significant wave height, capsizing probability contour diagram is generated by means of numerical simulation. The contour diagram shows that these analytical methods provide reliable and predictive results about the likelihood of a vessel capsizing in a given seaway condition.  相似文献   

A novel method to estimate mineral compositions of mudrocks: A case study for the Canadian unconventional petroleum systems     

《Marine and Petroleum Geology》2016

The mineral composition of mudrocks is an essential attribute in controlling the reservoir quality of unconventional petroleum systems. The present study introduces a semi-quantitative method to estimate mineral phases of mudrocks in various Canadian unconventional hydrocarbon systems using total elemental analysis (inductively coupled plasma-mass spectrometry (ICP-MS)) and Rock-Eval data (total organic carbon (TOC) and mineral carbon (MinC)).This method involves statistical analysis based on a sound knowledge of hydrocarbon source rock inorganic geochemistry. The workflow can be divided into four steps: (i) converting major elements (Si, Al, Fe, K, Na, Ca, Mg, Ti, and P) to their oxides, (ii) inferring modes of occurrence of elements using statistical analysis of geochemical data (major elements, TOC, and MinC), (iii) identifying the mineral types (oxide, aluminosilicates, carbonates, sulfide, and phosphate) according to elemental occurrences and calculating mineral phase concentrations, and (iv) verifying the results by comparing to XRD data on selected samples. The results, especially for brittle minerals such as quartz, carbonates (e.g. calcite, dolomite, and ankerite), and pyrite, show that the estimated mineral compositions correspond closely and consistently with measured mineralogy obtained from XRD. This method takes advantage of bulk geochemical data already available for hydrocarbon potential and chemostratigraphic studies, without devoting additional samples and cost for XRD analysis.  相似文献   

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China     

YANG Peng  REN Zhanli  XIA Bin  TIAN Tao  ZHANG Yong  QI Kai  REN Wenbo 《《地质学报》英文版》2018,92(3):1157-1169

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.  相似文献