成层软土地基预固结处理后桩基水平承载力估算方法     

黄朝煊  袁文喜  胡国杰 《岩土力学》2021,(1):113-124,134

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。  相似文献   

非饱和土中水平入渗方程显式求解     

李纪伟  林法力  韦昌富  汪华斌  陈盼  朱赞成  刘子振 《岩土力学》2021,(1):203-210

在求解非饱和态土中水分入渗问题时,水力函数是体积含水率或者吸力的函数,致使其控制方程呈现出强非线性的特征,进而使得其求解变得十分困难。基于水分在土体介质中流动耗时取极值路径的选择这一假定,引入时间泛函,基于变分法原理将水平入渗问题转化为泛函极值问题。通过求解Euler–Lagrange方程,结合边界条件,得到非线性瞬态水平入渗问题的显式解析解。结合Brooks-Corey型水力函数,显式地求解出该类型非饱和态土的体积含水率发展分布规律。通过计算4种不同类型土体的水平入渗规律,将求解结果与已有结果以及数值结果进行对比,验证了该方法的有效性。结果表明:体积含水率分布与位置距离和湿润峰距离比值呈幂函数关系,指数取决于土-水特征曲线的形状参数;初始条件与边界条件会对体积含水率分布造成不同程度的影响。  相似文献   

井筒电加热改善水平井蒸汽吞吐效果机理实验     

吴永彬  吕柏林  杜宣  卢迎波  蒋有伟  邢向荣 《现代地质》2021,35(4):1136-1146

针对稠油水平井蒸汽吞吐面临入井渗流阻力大、产量水平低、吞吐递减率高、采收率偏低等问题,提出了电加热辅助水平井蒸汽吞吐方法。首先根据水平井蒸汽吞吐过程中的电加热与蒸汽复合传热特征,建立了电加热辅助蒸汽吞吐三个阶段的(注汽阶段、焖井阶段、生产阶段)储层升温解析模型,在此基础上,设计并开展了电加热辅助蒸汽吞吐和常规水平井吞吐的宏观比例物理模拟对比实验,通过实验验证了解析公式,揭示电加热改善水平井吞吐效果关键机理,并利用实际典型井模型进行了潜力预测。结果表明:电加热协同蒸汽吞吐,具有注蒸汽阶段实现水平段均匀加热升温、焖井阶段持续热补偿加热近井地带、生产阶段降低原油入井渗流阻力并提高吞吐产量的关键机理。典型井组预测电加热辅助水平井吞吐可提高吞吐采收率9.4%,油汽比从0.14提高到0.23,在水平井蒸汽吞吐油藏具有重要应用潜力。  相似文献   

页岩气水平井TOC测井评价新方法     

刘伟男  张超谟  朱林奇  胡松  孔政  邓瑞 《物探与化探》2021,(2):423-431

由于存在地层缺失、井眼穿层不断变化、重点层段测井曲线较少、井眼环境复杂、测井响应值与储层参数关系较为复杂等特点,页岩气储层水平井测井解释难度较大。针对该问题,本文采用“水平井钻遇地层模型—水平井间及水平井与直井响应差异分析—水平井曲线校正—基于直井的参数评价模型”的评价技术流程,进行页岩气水平井TOC测井评价。在测井评价中,针对响应规律复杂的特点,采用直方图法进行测井响应规律分析,同时考虑到水平井测井曲线较少,为了综合利用测井曲线信息,结合曲线重叠方法提出双重信息融合评价模型。结果表明,本方法在充分分析测井响应差异的基础上对水平井测井曲线进行校正,且提出的双重信息融合模型具有能充分利用测井信息、评价精度高以及操作简单等优点。  相似文献   

河北平原廊固凹陷ACX03孔晚上新世以来地层与沉积^*          下载免费PDF全文

李瑞杰  王强  赵勇  魏波  孙永华 《古地理学报》2021,23(3):539-554

基于河北平原廊固凹陷东北部ACX03孔(深300.0 m)浅部¹⁴C年龄和磁性地层,建立钻孔第四纪地层格架,依据ACX03孔岩心沉积物、测井曲线和微体古生物特征划分沉积层段并分析沉积环境。研究结果表明: ACX03孔B/M(布容/松山)、M/G(松山/高斯)极性界线分别位于83.8 m、220.2 m,孔底年龄约3.2 Ma,划分13个沉积层段。上新统(220.2~300.0 m)为河道、河漫滩夹湖泊沉积,下更新统(85.2~220.2 m)为河道、湖泊、河漫滩沉积,中更新统(61.5~85.2 m)为分支河道夹河漫滩及河间洼地—湖沼沉积,上更新统(23.2~61.5 m)为河漫滩、分支河道沉积,全新统(0~23.2 m)为泛滥平原、河曲—牛轭湖沉积。对比ACX03孔与邻近钻孔第四纪地层认为,河北平原廊坊—固安一带早更新世差异性沉降最强,之后一直到全新世越来越弱。  相似文献   

一次梅雨暴雨的动能谱特征分析及收支诊断     

尹韩笑  张立凤  王羱  张明阳  余世旺 《大气科学》2019,43(5):1143-1157

利用WRF模式和NCEP再分析资料,对一次梅雨暴雨个例进行了数值模拟,基于高分辨率的模拟结果计算了水平动能谱、涡旋动能谱及辐散动能谱,诊断了动能收支谱方程。结果表明:在暴雨发展阶段,各个高度上都有中尺度动能增长,其显著增加始于中尺度低端,这导致了在中尺度波段出现谱转折特征,但在不同高度转折尺度不同;对流层高层涡旋动能大于辐散动能,平流层低层反之;不同降水阶段、不同高度和不同尺度上动能的来源不同,对流层高层,中尺度动能倾向由非线性项和气压项贡献;平流层低层,气压项的作用更为明显。  相似文献   

一次东北冷涡下槽后强风与飑线后向入流演变及成因分析     

张乐楠  丁治英  王咏青  张璐 《气象科学》2019,39(4):488-501

本文利用NCEP分析资料、多普勒雷达观测资料、常规气象观测资料以及数值模拟结果,对2016年7月30日发生在华北、辽宁附近的一次强飑线过程中后向入流的演变及成因进行研究。结果表明,此次飑线发生在中纬度新生冷涡槽前,低层有水汽辐合区和地面辐合线对应,且过程中伴有较强的对流有效位能释放。飑线后部中层(冷涡槽后)一直存在α中尺度西风大值带,此大风速带造成了上下层相反的水平涡度,并形成喇叭形环流结构,该结构不同于经典飑线结构。飑线后部水平方向上水平涡度分布不均匀,并形成水平涡度旋度上正下负的分布,即导致中层强风区上部上升运动、下部下沉运动,该下沉运动引发飑线中的后向入流和低层强风速带形成。在中层,飑线的后部边缘始终有较强的风速大值带伴随飑线的发展,该大值带的形成与对流强弱和非热成风涡度有关,对流过程中低层非热成风涡度为负,中上层非热成风涡度为正,导致飑线后部中层西风加速和低层西风减速,有利于后向入流的发展和飑线的维持,当对流减弱时,非热成风涡度与后向入流均减弱。文中给出了后向入流形成演变的概念模式。  相似文献   

边界层风廓线雷达测风精度分析     

吕博  孙青然  李楠  刘奇奇 《沙漠与绿洲气象(新疆气象)》2019,13(1):99-104

利用CLC-11-D型边界层风廓线雷达的5波束观测数据,对比分析了晴空、稳定性降水和对流性降水等不同类型气象条件下边界层风廓线雷达测风的准确性,并对2016年3月1日—2017年2月28日共计7300时次的晴空观测资料进行了测风质量评估,得出结论如下:在晴空条件下大气均匀稳定,水平风速和风向测量精度要优于稳定性降水和对流性降水天气,降水出现前后环境大气扰动较大是导致稳定性降水和对流性降水天气下测风精度较差的原因;150 m以下近地层高度的测风质量较差,与地杂波干扰较强有关;夏季有效探测高度最高可达6300 m左右,春秋季有效探测高度比较接近,分别为2000 m和2500 m左右,冬季有效探测高度最低,仅为1100 m左右;4个季节测风质量评估达标高度分别为900、4000、2200 m和1100 m,大气环境的湿度条件和水平风速、风向标准差的波动是影响测风质量评估的重要因素。  相似文献   

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system     

Kuang‐Yi Li  Shaw‐Yang Yang  Hund‐Der Yeh 《水文研究》2010,24(25):3676-3688

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Seasonal evaluation of rainfall estimation by four cumulus parameterization schemes and their sensitivity analysis     

Asnor Muizan Ishak  Michaela Bray  Renji Remesan  Dawei Han 《水文研究》2012,26(7):1062-1078

Sustainable water resources management require scientifically sound information on precipitation, as it plays a key role in hydrological responses in a catchment. In recent years, mesoscale weather models in conjunction with hydrological models have gained great attention as they can provide high‐resolution downscaled weather variables. Many cumulus parameterization schemes (CPSs) have been developed and incorporated into three‐dimensional Pennsylvania State University/National Center for Atmospheric Research (PSU/NCAR) mesoscale model 5 (MM5). This study has performed a comprehensive evaluation of four CPSs (the Anthes–Kuo, Grell, Betts–Miller and Kain–Fritsch93 schemes) to identify how their inclusion influences the mesoscale model's precipitation estimation capabilities. The study has also compared these four CPSs in terms of variability in rainfall estimation at various horizontal and vertical levels. For this purpose, the MM5 was nested down to resolution of 81 km for Domain 1 (domain span 21 × 81 km) and 3 km for Domain 4 (domain span 16 × 3 km), respectively, with vertical resolutions at 23, 40 and 53 vertical levels. The study was carried out at the Brue catchment in Southwest England using both the ERA‐40 reanalysis data and the land‐based observation data. The performances of four CPs were evaluated in terms of their ability to simulate the amount of cumulative rainfall in 4 months in 1995 representing the four seasonal months, namely, January (winter), March (spring), July (summer) and October (autumn). It is observed that the Anthes–Kuo scheme has produced inferior precipitation values during spring and autumn seasons while simulations during winter and summer were consistently good. The Betts–Miller scheme has produced some reasonable results, particularly at the small‐scale domain (3 km grid size) during winter and summer. The KF2 scheme was the best scheme for the larger‐scale (81 km grid size) domain during winter season at both 23 and 53 vertical levels. This scheme tended to underestimate rainfall for other seasons including the small‐scale domain (3 km grid size) in the mesoscale. The Grell scheme was the best scheme in simulating rainfall rates, and was found to be superior to other three schemes with consistently better results in all four seasons and in different domain scales. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献