Environmental Investigation and Evaluation of Land Subsidence in the Datong Coalfield Based on InSAR Technology   总被引：1，自引：0，他引：1  

JIA Xiuming  MA Chao  ZHAO Anyuan 《《地质学报》英文版》2008,82(5):1035-1044

Heavy mining of Jurassic and Carboniferous horizontal coal seams in the Datong coalfield has seriously affected the local geological environment, which is mainly manifested by such geohazards as soil avalanches, landslides, mudflows, surface subsidence, surface cracks, surface solid waste accumulation and surface deformation. More seriously, coal mining causes groundwater to leak. Overpumping of groundwater has resulted in substantial land subsidence of the urban area in Datong City. Based on the previous geo-environmental investigation in the work area, the authors used radar remote sensing techniques such as InSAR （synthetic aperture radar interferometry） and D-InSAR （differential synthetic aperture radar interferometry）, supplemented by the optical remote sensing method, for geo-environmental investigation to ascertain the geo-environmental background of the Datong Jurassic and Carboniferous-Permian coalfield and evaluate the effects of the geohazards, thus providing a basis for the geo-environmental protection, geohazard control and prevention, land improvement and optimization of the human environment. In this study 8 cog-nominal ERS-1/2 SAR data frames during 1992 to 2003 were used, but the following processing was made： （1） the multitemporal SAR magnitude images were used to interpret the geological structure, vegetation, microgeomorphology and drainage system; （2） the multi-temporal InSAR coherent images were used to make a classification of surface features and evaluate the coherence change due to coal mining; and （3） the multi-temporal cog-nominal SAR images were used to complete D-InSAR processing to remove the information of differential deformation areas （sites）. In the end, a ten-year time series of differential interferograms were obtained using the multi-temporal cog-nominal SAR images. In the tests, 84 deformed areas （sites） were obtained, belonging to those in 1993-1996, 1996-1997, 1997-1998, 1998-2001, 1998-2002 and 2001-2003 respectively. Of the 84 areas, 44 are m  相似文献   

土壤吸湿-湿过程中水力传导度的拟合研究     

郝鹏  郑西来  田守波  马玉杰  李伟 《地下水》2008,30(3):4-7

非饱和含水介质在吸湿和脱湿的不同过程中,水力传导度随介质含水率的变化规律是不同的。本文选取大沽河流域两种代表性砂土,对其吸湿-脱湿两个过程分别进行试验观测,并使用VanGenuchten—Mualem模型对其吸湿-脱湿过程进行水力传导度的拟合。研究结果表明：砂土在吸湿过程的非饱和水力传导度与脱湿过程的非饱和水力传导度大小并不相同,在含水率相同的情况下,吸湿过程的水力传导度要比脱湿过程大,在含水率较低时（小于15％）相差可达1个数量级。  相似文献   

InSAR复数影像配准方法探讨   总被引：1，自引：0，他引：1  

焦明连  蒋廷臣 《测绘与空间地理信息》2008,31(6)

复数影像配准是卫星合成孔径雷达干涉数据处理中的重要步骤之一,本文对目前影像配准最常用的方法进行了研究分析,提出了基于幅度影像的配准方案,并证明该方案配准精度高,适应能力强,运算效率高.  相似文献   

Estimation of statistical parameters for censored lognormal hydraulic conductivity measurements     

Xian-Huan Wen 《Mathematical Geology》1994,26(6):717-731

Field tests of hydraulic conductivity (e.g., injection test, pumping test, etc.) in low permeability formations are subject to censoring due to the detection limit of the instruments used. An iterative method of estimating the mean and variance of hydraulic conductivity data with a presumed log-normal distribution function is presented. This method accounts for the data that are actually below the lower detection limit (called truncated data) and thus gives distribution parameters that are more representative for the underlying distribution. The proposed method is then tested on two simulated normally distributed random datasets having different variances. The results show that the means and variances estimated by the proposed method are very accurate. Finally, the method is used to estimate the mean and variance of hydraulic conductivity data from single hole water injection tests in a fractured geological formation.  相似文献   

Application of X-ray computed tomography for analyzing cleat spacing and cleat aperture in coal samples   总被引：2，自引：2，他引：2  

S. Mazumder  K.-H.A.A. Wolf  K. Elewaut  R. Ephraim 《International Journal of Coal Geology》2006,68(3-4):205-222

New techniques to determine distributions of cleat aperture, cleat orientation and cleat spacing from CT scans have been developed. For cleat orientation and spacing distributions, two different coal blocks were scanned. The CT scans have been analyzed for the three orthogonal directions. Histograms of the cleat orientations are bimodal, expressing the typical cleat texture of face and butt cleats and bedding perpendicular relaxation fractures. Deviations up to 20° from the peak values in the cleat orientation distributions were used as input for automated image analysis of cleat spacing. Distributions of the cleat spacing measurements are related to the face and butt cleat directions. The term “relevant cleat length” is introduced as a measure to extract the amount of cleat length involved with the cleat spacing measurements. The ratio ranges from 0.03 to 0.38 and expresses the difference in cleat texture in both samples. Cleat spacing versus relevant cleat length shows sample specific patterns for face cleat, butt cleat and bedding. To describe cleat aperture quantitatively, peak height and missing attenuation have been used. The image of a cleat was seen as a convolution of a rectangular fracture profile with a Gaussian point spread function.  相似文献   

The log-normal distribution for hydraulic conductivity of compacted clays: Two or three parameters?     

Huaming Zhai  Craig H. Benson 《Geotechnical and Geological Engineering》2006,24(5):1149-1162

Risk and uncertainty assessments for waste containment systems employing clay barriers often include spatial variability in the hydraulic conductivity as part of the analysis. The two-parameter log-normal distribution is often used to describe the spatial variability, but for compacted clays the three-parameter form can be more appropriate. A statistical hypothesis test was developed that can be used to determine if the two- or three-parameter form of the log-normal distribution is more appropriate. The test is based on a likelihood ratio, comparing likelihood functions for the two- and three-parameter forms at their maximums. Likelihood functions are used assuming that a data set can be segregated into a set of distinct groups of hydraulic conductivities. A step-by-step calculation procedure is described and the test is applied to data collected from 45 sites.  相似文献   

The role of friction and secondary flaws on deflection and re-initiation of hydraulic fractures at orthogonal pre-existing fractures   总被引：1，自引：0，他引：1  

Xi Zhang  Robert G. Jeffrey 《Geophysical Journal International》2006,166(3):1454-1465

  相似文献   

Evaluation of three waterborne polymers as stabilizers for sandy soil     

Abdullah Al-Khanbashi  Shihab W. Abdalla 《Geotechnical and Geological Engineering》2006,24(6):1603-1625

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.  相似文献   

Experimental research on a new encapsulated heat-generating hydraulic fracturing fluid system     

吴金桥  张宁生  吴新民  刘晓娟 《中国地球化学学报》2006,25(2):162-166

1 IntroductionFracturing plays an important role in increasingthe production and injection and enhancing the final re-covery of oil and gas. At present, the use of ahydroxypropyl guar gum, borate-crosslinked, hydraulicfracturing fluid systemhas become ext…  相似文献   

叠前时间偏移在华北地区的应用   总被引：1，自引：0，他引：1  

ZHOU Chen-guang SHAN Gang-yi ZHANG Li-hua College of GeoExploration Science  Technology  Jilin University  Changchun  China 《吉林大学学报(地球科学版)》2006,(Z2)

从应用的角度较详细地论述了三维叠前克希霍夫时间偏移的过程。在给定合理的偏移孔径下,三维叠前克希霍夫时间偏移利用均方根速度对叠前地震数据进行逐道处理,从而得到准确的归位数据。叠前时间偏移相对叠后时间偏移而言,前者能够进一步提高地下信息的成像质量及归位准确性,信噪比和分辨率也得到了改善,能够满足精细的地震资料的解释。因此,三维叠前克希霍夫时间偏移对于速度变化平缓、地下构造较复杂的地区具有广泛的应用价值。  相似文献