Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling     

《Computers and Geotechnics》2016

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.  相似文献   

基于 ArcG IS 和 Python 集成开发可达性分析工具的研究     

胡红  赖鑫生 《测绘工程》2016,25(11):43-49

为降低可达性度量的实现难度,弥补现有GIS软件没有集成可达性分析模型或方法的不足,在详尽分析有关模型或方法与GIS集成研究现状的基础上,提出以改进潜能模型作度量模型,按GIS内部集成方式,使用面向ArcGIS 10的Python脚本编程技术集成开发可达性分析工具的设想,对可达性潜能模型分析原理、工具开发环境配置、使用数据的预处理要求、工具的具体设计流程和实现方法等作了详细叙述。最后以评价某市小学教育资源空间布局合理性为例,阐述工具在实际应用中应采取的使用方法和流程,实例评价结果验证工具开发的有效性。  相似文献   

冰盖下矩形河道的综合糙率          下载免费PDF全文

陈刚  张玉蓉  周密  顾世祥 《水科学进展》2016,27(2):290-298

综合糙率是采用曼宁公式确定河道水位和流量关系的关键参数。在河道冰封期,冰盖的出现增加了流动的阻力,明流条件下确定的综合糙率不再适用,需要重新估算。基于Einstein阻力划分过流断面的原理,冰盖下矩形河道的过水断面可划分为冰盖区、河床区和边壁区。根据总流的连续性方程,在确定各分区糙率系数、水力半径和断面面积的基础上,提出了冰盖下矩形河道综合糙率的计算公式。采用已有的试验水槽测量数据和天然河道实测资料对公式进行了验证,结果表明:公式计算的综合糙率与实测值吻合较好,与Einstein公式和Sabaneev公式相比,计算精度更高;对于冰封水流,宽浅河道采用分区水深代替水力半径进行简化计算的条件有别于明渠水流,在宽深比大于20时,计算结果才满足精度要求。  相似文献   

赣北红土区工程堆积体坡面水动力特性   总被引：1，自引：0，他引：1       下载免费PDF全文

王雪松  陈曦  马洪超  谢永生 《水科学进展》2016,27(3):412-422

为探明锥状工程堆积体坡面薄层水流剥蚀率与水力要素之间的关系, 室内模拟赣北红土区散乱锥状工程堆积体。通过人工降雨试验, 设计4种降雨强度(1.0~2.5mm/min)和3种砾石含量(10%~30%)完全组合。采用灰色关联度分析法, 评估坡面水力参数与土壤剥蚀率之间的关联度。结果表明:① 在试验条件下, 坡面水流功率与土壤剥蚀率呈幂函数关系;② 当堆积体砾石含量一定时, 以降雨强度为变量能反映堆积体坡面水力参数与土壤剥蚀率之间的关联度;③ 当降雨强度一定时, 大雨强下(≥1.5mm/min)堆积体砾石含量不宜作为灰色关联度分析的变量。综上所述, 水流功率是描述赣北红土区锥状工程堆积体侵蚀过程的最佳水力参数, 可用于建立堆积体侵蚀物理模型。  相似文献   

日照市河谷平原区成井方法对比研究     

陈冶  程微  陈文彬  岳雅  苑雪峰 《化工矿产地质》2016,(3):166-170

在分析日照河谷平原区水文地质条件的基础上,通过大量抽水试验数据,对比分析研究了当地民井与本次施工水井成井方法的差异,指出了当地民井在成井方法上的不足和缺陷,并提出了适宜该区的成井方法建议。  相似文献   

钻孔压水试验水压式栓塞排水泄压问题研究          下载免费PDF全文

裴熊伟 《探矿工程》2016,43(3):56-59

压水试验水压式栓塞较其他类型栓塞可靠、灵活,但一直存在试验结束后排水泄压难题,使该类型栓塞使用局限于浅孔及地下水位高的钻孔。本文对该问题进行了研究,提出了解决方案,设计了新型水压式栓塞结构。解决了一直以来水压式栓塞的排水泄压难题,突破了试验孔深限制,使水压式栓塞能得到广泛应用。介绍了该新型水压式栓塞的结构和工作原理以及工程应用效果。  相似文献   

乌兰哈达变质岩地层地热勘探井钻头选择与取心工艺          下载免费PDF全文

宋国龙  董劲松  李进安 《探矿工程》2016,43(12):41-44

内蒙古自治区察右后旗乌兰哈达苏木地热勘探井井深2006.87 m。采用石油30型钻机施工,钻遇地层大部分为变质岩,达1500 m以上,对牙轮钻头损坏严重,同时施工要求进行18次岩心采取。经过对钻头的试用、选择,最后选用HJ637G型牙轮钻头,钻进时效可达0.8～1.2 m,使用寿命可达到80～100 h。取心段采用川7-4型双管单动取心筒配合金刚石钻头,岩心采取率可达70%～95%。  相似文献   

Leachate studies on fly ash-stabilised expansive clay liners     

M. Uma Shankar 《Geomechanics and Geoengineering》2016,11(2):114-118

This paper presents leachate studies on fly ash-stabilised expansive clay liners. Fly ash in different contents (0%, 10%, 20% and 30%) by dry weight of the expansive clay was added to the clay, and the ash-clay blend was compacted as a liner overlying a compacted lateritic clay layer. Deionised water (DIW) and calcium chloride (CaCl₂) solutions of varying concentration (5 mM, 10 mM, 20 mM, 50 mM, 100 mM and 500 mM) were used as the permeating fluids in the leachate studies. Chemical analysis of the leachate was performed. For a given CaCl₂ concentration, the concentrations of both calcium ion and chloride ion in the leachate decreased up to a fly ash content of 20%, and thereafter they increased when the fly ash content was increased to 30%. Further, for a given fly ash content, concentrations of calcium ion and chloride ion increased with increasing CaCl₂ concentration.  相似文献   

Geotechnical Hybrid Simulation to Investigate the Effects of the Hydraulic Conductivity on One-Dimensional Consolidation Settlement     

Youngcheul Kwon 《Marine Georesources & Geotechnology》2016,34(3):219-233

Difficulties in the prediction of time-distribution of consolidation settlement will be introduced by using the Murayama test embankment case of Japan. In particular, it will be discussed why the prediction of consolidation rate is difficult in multi-layered soil with complex and variable mechanical properties like organic soil or peat. It can be inferred that uncertainties, which are embedded intricately in the consolidation problem as well as given ground condition, would be major causes for consolidation settlement. After that, the author focused on the movement of pore water under the various conditions of hydraulic conductivity in the soils, and how it can affect the time-distribution of the consolidation settlement. For the applied key methodology on the consolidation settlement problem, we propose the hybrid consolidation simulation controlling the movement of pore water with high accuracy and, finally, the aim of this article is to discuss the methodological approaches obtained by the study, including the basic concept and accurate movement of pore water under various conditions of soil layers and hydraulic conductivity.  相似文献   

Numerical Analysis of Gravity Coring Using Coupled Eulerian-Lagrangian Method and a New Corer     

Huawei Qin  Zhen Cai  Jianjun Wang  Wei Ye  Ying Chen 《Marine Georesources & Geotechnology》2016,34(5):403-408

The shortcomings of gravity corers in sampling marine sediments have been observed extensively in various field tests. In order to optimize the coring, this article provides an alternative numerical way to model the gravity coring and analyze the sampling effect. Based on this analysis, a new hydraulic hammer corer is devised. A coupled Eulerian-Lagrangian method with capability of simulating the problem involving extreme deformation, penetration is used to simulate the coring process. The results show that the hydrostatic pressure and deviator stress increase and reach their peak when the pile tip is slightly above or at the level of the observation point and then drop rapidly when the pile tip slides below the observation point. In addition, the stress path indicates that the soil element sustains plastic compression before yielding and then expands until recovering to the original state. The obvious “under-sampling” phenomenon is also well-captured by the finite element model.  相似文献