YGQ—89／43型双作用冲击器微机电算分析     

李国民  蒋荣庆 《世界地质》1997,16(4):83-86

通过微机模拟仿真电算，分析ＹＧＱ－８９／４３型冲击器结构参数的变化对冲击器性能的影响规律，从而找出调节冲击器性能的有效方法，指导设计和生产使用。  相似文献   

水流冲击管道内滞留气团的刚性数学模型   总被引：3，自引：0，他引：3       下载免费PDF全文

刘德有  索丽生 《水科学进展》2004,15(6):717-722

通过数学分析证明,在不计局部水头损失时,目前常用的几种简化刚性数学模型的最大气压计算结果相等,并与管道内初始充水段长度无关。但算例表明,对于初始充水段较短或滞留气团体积很小情况,这些简化模型的计算误差将达到不容忽视的程度,甚至导出错误结论。笔者导出的完整刚性数学模型,弥补了简化模型的不足,同时指出了刚性模型的理论缺陷和适用条件。  相似文献   

Soil respiration in tropical seasonal rain forest in Xishuangbanna, SW China     

SHA Liqing  ZHENG Zheng  TANG Jianwei  Wang Yinghong  ZHANG Yiping  CAO Min  WANG Rui  Liu Guangren  WANG Yuesi  SUN Yang 《中国科学D辑(英文版)》2005,48(Z1)

With the static opaque chamber and gas chromatography technique, from January 2003 to January 2004 soil respiration was investigated in a tropical seasonal rain forest in Xishuangbanna, SW China. In this study three treatments were applied, each with three replicates: A (bare soil), B (soil+litter), and C (soil+litter+seedling). The results showed that soil respiration varied seasonally, low from December 2003 to February 2004, and high from June to July 2004. The annual average values of CO2 efflux from soil respiration differed among the treatments at 1% level, with the rank of C (14642 mgCO2· m-2. h-1)＞B (12807 mgCO2· m-2. h-1)＞A (9532 mgCO2· m-2. h-1). Diurnal variation in soil respiration was not apparent due to little diurnal temperate change in Xishuangbanna. There was a parabola relationship between soil respiration and soil moisture at 1% level. Soil respiration rates were higher when soil moisture ranged from 35% to 45%. There was an exponential relationship between soil respiration and soil temperature (at a depth of 5cm in mineral soil) at 1% level. The calculated Q1o values in this study,ranging from 2.03 to 2.36, were very near to those of tropical soil reported. The CO2 efflux in 2003was 5.34 kgCO2· m-2. a-1 from soil plus litter plus seedling, of them 3.48 kgCO2· m-2. a-1 from soil (accounting for 62.5%), 1.19 kgCO2· m-2. a-1 from litter (22.3%) and 0.67 kgCO2·m-2. a-1 from seedling (12.5%).  相似文献   

Implicit integration under mixed controls of a breakage model for unsaturated crushable soils          下载免费PDF全文

Yida Zhang  Giuseppe Buscarnera 《国际地质力学数值与分析法杂志》2016,40(6):887-918

This paper discusses a series of stress point algorithms for a breakage model for unsaturated granular soils. Such model is characterized by highly nonlinear coupling terms introduced by breakage‐dependent hydro‐mechanical energy potentials. To integrate accurately and efficiently its constitutive equations, specific algorithms have been formulated using a backward Euler scheme. In particular, because implementation and verification of unsaturated soil models often require the use of mixed controls, the incorporation of various hydro‐mechanical conditions has been tackled. First, it is shown that the degree of saturation can be replaced with suction in the constitutive equations through a partial Legendre transformation of the energy potentials, thus changing the thermomechanical state variables and enabling a straightforward implementation of a different control mode. Then, to accommodate more complex control scenarios without redefining the energy potentials, a hybrid strategy has been used, combining the return mapping scheme with linearized constraints. It is shown that this linearization strategy guarantees similar levels of accuracy compared with a conventional strain–suction‐controlled implicit integration. In addition, it is shown that the use of linearized constraints offers the possibility to use the same framework to integrate a variety of control conditions (e.g., net stress and/or water‐content control). The convergence profiles indicate that both schemes preserve the advantages of implicit integration, that is, asymptotic quadratic convergence and unconditional stability. Finally, the performance of the two implicit schemes has been compared with that of an explicit algorithm with automatic sub‐stepping and error control, showing that for the selected breakage model, implicit integration leads to a significant reduction of the computational cost. Such features support the use of the proposed hybrid scheme also in other modeling contexts, especially when strongly nonlinear models have to be implemented and/or validated by using non‐standard hydro‐mechanical control conditions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions          下载免费PDF全文

Xiong Zhang  Jean‐Louis Briaud 《国际地质力学数值与分析法杂志》2015,39(13):1369-1409

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

A model for moisture and heat flow in fractured unsaturated porous media          下载免费PDF全文

A.M. Varnosfaderani  B. Gatmiri  E.M. Haghighi 《国际地质力学数值与分析法杂志》2017,41(6):828-858

The present study investigates propagation of a cohesive crack in non‐isothermal unsaturated porous medium under mode I conditions. Basic points of skeleton deformation, moisture, and heat transfer for unsaturated porous medium are presented. Boundary conditions on the crack surface that consist of mechanical interaction of the crack and the porous medium, water, and heat flows through the crack are taken into consideration. For spatial discretization, the extended finite element method is used. This method uses enriched shape functions in addition to ordinary shape functions for approximation of displacement, pressure, and temperature fields. The Heaviside step function and the distance function are exploited as enrichment functions for representing the crack surfaces displacement and the discontinuous vertical gradients of the pressure and temperature fields along the crack, respectively. For temporal discretization, backward finite difference scheme is applied. Problems solved from the literature show the validity of the model as well as the dependency of structural response on the material properties and loading. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Intensity of in‐lake processes in floodplain lakes within the Bug River zone of fluvial activity          下载免费PDF全文

Jarosław Dawidek  Beata Ferencz 《水文研究》2014,28(24):5965-5971

The paper presents a new approach to calculating the erosion and deposition values of floodplain lake basins, the erosion–deposition index (EDI). The EDI is a sum of the basin geometry indices (BGIs), which can be calculated for a separate cross section of the lake. The distribution of processes within the basin was investigated in two selected floodplain lakes with the use of BGIs. Field research was carried out in the Bug River valley from 1 November 2006 to 31 October 2011. The highest erosion was observed in the lakes located close to the parent river. Deposition processes were observed in lakes with high inflow of groundwater. The results showed that EDI values of 48 out of the 71 floodplain lakes ranged from ?0.2 to 0.2. Spatial distribution of erosion and deposition processes within the lake basins resulted from a velocity of water inflowing or flowing through the basin. This was observed especially in contrafluent–confluent lake. Inflow of rivers water via upstream crevasse occurred later than via downstream one, but energy of flowing water was higher, which favoured erosion of this part of the lake basin. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

FD-600全液压动力头反循环连续取样钻机研制与应用     

刘智荣  伍晓龙  王庆晓 《探矿工程》2018,45(3):62-67

文章结合国内外CSR取心技术的现状和所生产钻机的特点,为满足国内对空气反循环连续取样（心）、冲击回转、定向钻进等多种高效钻探工艺对钻机的需要,从钻机整体结构设计、整体布局进行详细考量,采用质量可靠的液压件、动力机等外购件,摒弃传统钻机设计周期长、动力小、机械化程度低、对地形和钻探工艺适应性低等特点,研制出了一台高效、可靠、机械化程度较高的FD-600型全液压动力头式反循环取样钻机。在3次野外生产试验中充分体现出了优越性,可满足砂金勘探、工程施工等取心钻探的要求。  相似文献   

四川平武银厂金矿勘探复杂地层钻进技术          下载免费PDF全文

杨福全  龙海涛 《探矿工程》2018,45(6):36-39

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。  相似文献   

高温硬岩空气潜孔锤钻头设计          下载免费PDF全文

罗宏保  李俊萍  吴金生 《探矿工程》2021,48(4):60-65

干热岩试验性开发井钻井施工,在高温硬岩的地层条件下,如何实现高效钻进仍存在很多技术难点。空气潜孔锤钻进技术是解决硬岩地层钻进的有效方法之一,潜孔锤钻头是空气潜孔锤钻进的关键器具。根据青海共和干热岩GH-01井空气潜孔锤钻进技术应用情况,分析探讨了空气潜孔锤钻头断齿、掉齿、磨损严重、使用寿命短等问题,从钻头结构设计、钻头材料选取、钻头冷压固齿工艺等几个方面对空气潜孔锤钻头进行了优化。固齿优化过程中采用有限元分析方法,对钻头冷压固齿过盈量进行仿真分析计算,根据分析计算结果确定最优固齿过盈量。通过对潜孔锤钻头结构、材料、加工等优化,为适用于高温硬岩的空气潜孔锤钻头研制提供了借鉴。为提高空气潜孔锤钻进综合效率,为干热岩钻探开发提供了技术支持和技术储备。  相似文献