A wind tunnel investigation of particle segregation,ripple formation and armouring within sand beds of systematically varied texture          下载免费PDF全文

Cheryl McKenna Neuman  ottO Bédard 《地球表面变化过程与地形》2017,42(5):749-762

This paper reports on a wind tunnel investigation of particle segregation, ripple formation and surface armouring within sand beds of systematically varied particle size distribution, from coarsely skewed to bimodal. By design, the system was closed with no external inputs of mass from an external particle feed. Particles too coarse to travel in saltation for the given range in wind speed were dyed red in order to distinguish them in optical images from finer sand particles, which could be entrained into the unidirectional airflow. A 3D laser scanner measured the changing bed topography at regular time intervals during 18 experiments involving varied combinations of wind speed and bed texture. Image classification techniques were used to investigate the coincident self‐organization of the two populations of particles, as distinguished by their colour. As soon as saltation commenced, some of the red particles segregated into thin discontinuous patches. Particle trapping and sheltering on these rough patches was strongly favoured, causing them to grow preferentially. During the earliest stages of formation, bedform growth coincided with: (i) rapid coarsening of the surface texture; and (ii) the merging of proto‐ripple ‘crests’ to generate larger rhythmic bedforms of lower frequency. Consistent with previous work, ripple size was observed to increase under stronger winds when not exceeding the threshold for entrainment of the coarse‐mode or red particles from the crest. With declining rates of mass transport and particle segregation as the bed surface armoured, and the consequent deceleration of ripple propagation through to the end of each experiment, all surfaces eventually attained a steady‐state morphometry. At saturation, the largest ripples developed on beds having the lowest initial concentration of red particles. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction          下载免费PDF全文

Christian Auel  Ismail Albayrak  Tetsuya Sumi  Robert M. Boes 《地球表面变化过程与地形》2017,42(9):1384-1396

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

基于传力路径的平面不规则RC框架结构减震设计          下载免费PDF全文

杜永峰  张文丽  黄小宁 《地震工程学报》2017,39(3):404-410,424

针对平面不规则RC框架结构,从构件安全层次出发提出基于传力路径的减震设计方法。首先根据广义结构刚度法的基本原理计算结构中所有构件的重要性系数,再假定消能支撑的截面参数,取每层最重要的构件位置布置支撑,经支撑在最不利地震组合下的轴力验算后确定支撑的最终设计参数和数量,然后考虑远场、近场有脉冲以及近场无脉冲地震动从双向输入对结构响应的影响,对减震前、后结构分别进行动力时程分析。分析结果表明,利用此方法优化布置支撑能为结构中重要构件提供有效保护,且在小、中、大震下消能支撑均能运作良好,使整体结构响应得到很好地控制。  相似文献   

前板可旋转的双垂板结构水动力特性的理论研究     

欧泽挺  邓争志  任翔  赵西增 《海洋工程》2021,39(2):98-109

振荡水柱波能转换装置的最大转换效率往往受到腔内水柱共振机制的直接影响。通过对装置的基本结构进行简化,提出了一种前墙可绕固定轴旋转的双垂板式结构系统,旨在通过前墙的旋转运动进一步加剧水柱的振荡,从而对腔内水柱的共振机制进行调节和控制。基于线性波理论,采用匹配特征函数展开法对波浪与双垂板结构的相互作用进行理论研究,针对流场在结构物尖角附近的奇异性特征,将公共界面上的速度分布基于切比雪夫多项式近似展开,并应用区域间的速度与压力连续条件进行求解。通过分析结构的几何参数对反射透射系数、平均波面高程、前墙旋转振幅以及前墙与水面间相位差的影响,深究其共振机理,为振荡水柱波能转换装置的效率优化机制提供理论依据。结果表明,在所研究的波浪频率范围内,前墙的自由旋转运动会加剧板间的平均波面高程,应用于波浪能转换装置中能进一步拓宽高效频率带宽。  相似文献   

基于长时间序列ERA-Interim再分析资料的广东沿海波浪能资源分布特征分析     

江森汇  舒勰俊  王青  闫姿彤 《海洋通报》2021,40(5)

波浪能的开发利用作为海洋可再生能源发展的重要组成部分,持续受到社会和学界的广泛关注。广东省波浪能资源的开发利用具有得天独厚的优势,但其发展水平还处于探索阶段,亟须进一步加强。本文利用长达40年(1979—2018年)的ERA-Interim再分析波浪资料,从总体分布特征上分析了广东沿海波浪能资源及其长期变化趋势。粤东-珠江口-粤西沿岸一线,波浪能资源呈现"低-高-低-高-低"的分布特征,具有显著的季节变化特征;长期变化趋势上呈现显著的逐年线性递增特征,递增速率为0.054 3 kW/(m·a),其中1979—1994年变化较为快速,2001—2018年变化较为平缓。  相似文献   

Seismic performance of buildings retrofitted with nonlinear viscous dampers and adjacent reaction towers     

《地震工程与结构动力学》2018,47(5):1329-1351

An effective strategy of seismic retrofitting consists of installing nonlinear viscous dampers between the existing building, with insufficient lateral resistance, and some auxiliary towers, specially designed and erected as reaction structures. This allows improving the seismic performance of the existing building without any major alteration to its structural and nonstructural elements, which makes this approach particularly appealing for buildings with heritage value. In this paper, the nonlinear governing equations of the coupled lateral‐torsional seismic motion are derived from first principles for the general case of a multistory building connected at various locations in plan and in elevation to an arbitrary number of multistory towers. This formulation is then used to assess the performance of the proposed retrofitting strategy for a real case study, namely, a 5‐story student hall of residence in the city of Messina, Italy. The results of extensive time‐history analyses highlight the key design considerations associated with the stiffness of the reaction towers and the mechanical parameters of the nonlinear viscous dampers, confirming the validity of this approach.  相似文献   

Long‐term sediment yield from a small catchment in southern Brazil affected by land use and soil management changes          下载免费PDF全文

Jean P.G. Minella  Gustavo H. Merten  Claúdia A.P. Barros  Rafael Ramon  Alexandre Schlesner  Robin T. Clarke  Michele Moro  Leandro Dalbianco 《水文研究》2018,32(2):200-211

Sediments produced from eroding cultivated land can cause on‐site and off‐site effects that cause considerable economic and social impacts. Despite the importance of soil conservation practices (SCP) for the control of soil erosion and improvements in soil hydrological functions, limited information is available regarding the effects of SCP on sediment yield (SY) at the catchment scale. This study aimed to investigate the long‐term relationships between SY and land use, soil management, and rainfall in a small catchment. To determine the effects of anthropogenic and climatic factors on SY, rainfall, streamflow, and suspended sediment concentration were monitored at 10‐min intervals for 14 years (2002–2016), and the land use and soil management changes were surveyed annually. Using a statistical procedure to separate the SY effects of climate, land use, and soil management, we observed pronounced temporal effects of land use and soil management changes on SY. During the first 2 years (2002–2004), the land was predominantly cultivated with tobacco under a traditional tillage system (no cover crops and ploughed soil) using animal traction. In that period, the SY reached approximately 400 t·km^?2·year^?1. From 2005 to 2009, a soil conservation programme introduced conservation tillage and winter cover crops in the catchment area, which lowered the SY to 50 t·km^?2·year^?1. In the final period (2010–2016), the SCP were partially abandoned by farmers, and reforested areas increased, resulting in an SY of 150 t·km^?2·year^?1. This study also discusses the factors associated with the failure to continue using SCP, including structural support and farmer attitudes.  相似文献   

新型扇形盘式消能器减震性能参数分析          下载免费PDF全文

杨琼  郭阳照  吴体  杨成 《地震工程学报》2018,40(4):643-651

提出了一种新型扇形盘式效能器(fanshaped disc-type energy dissipator,FDED),阐明了其原理、特点,导出其设计要点和设计理论,采用数值方法分析了FDED的减震性能,研究不同设计参数对FDED减震性能的影响。结果表明:FDED设计原理可行,减震机理明确,其转盘式的构造可起到有效的位移放大效果,使得消能器在小激励位移下发挥耗能作用;FDED具有明显的双线性恢复力特性和稳定的耗能性能,等效黏滞阻尼系数可达50%以上;阻尼件中橡胶硬度的改变对FDED初始刚度的影响不敏感,但对FDED屈服后刚度和等效黏滞阻尼系数的影响较为明显。随着橡胶硬度的增大,FDEDE的屈服后刚度上升,等效黏滞阻尼系数降低;保持阻尼层中橡胶层的总厚度不变,通过增减叠层钢板改变单层橡胶层的厚度对于调整FDED的减震性能影响不大;调整铅芯直径的大小主要影响FDED的屈服力和耗能性能。随着铅芯直径的增大,FDED的屈服力也增大,耗能能力逐渐提高。  相似文献   

建筑用玻化微珠保温混凝土剪力墙抗震结构设计          下载免费PDF全文

朱保华  韩丽婷 《地震工程学报》2018,40(5):963-968

传统方法主要通过导热系数低的材料和增加墙体厚度来达到抗震效果。该方法不仅浪费能源而且抗震性能较差,因此对建筑用玻化微珠保温混凝土剪力墙抗震结构进行设计,构建玻化微珠保温混凝土本构模型,获得与抗震结构相关的理论数据。根据所获取的数据,选择板壳单元SHELL63作为玻化微珠保温混凝土剪力墙抗震结构单元。依据抗震结构材料参数以及抗震结构单元,采用ANSYS软件模拟构建玻化微珠保温混凝土剪力墙抗震结构。分析实验结果可知,所设计建筑节能抗震结构的抗震性能较好,实际运用价值高。  相似文献   

Model for multiblock columns subjected to base excitation          下载免费PDF全文

Tamás Ther  László P. Kollár 《地震工程与结构动力学》2018,47(2):418-437

A new model is presented for multiblock columns subjected to earthquakes, which contains an impact and an opening model. Both in the impact and in the opening model, all the possible opening configurations are investigated because it was found that in many practical cases, unexpected patterns may occur. The model is purely mechanical: assuming rigid blocks and classical (inelastic) impact. The effect of energy dissipation during impact was investigated. Using our model in accordance with the literature, it was found that monolithic blocks are more vulnerable to overturning than multiblock systems.  相似文献