NWP在颠簸预报中的应用     

贾东红  李月珍  王莉 《山西气象》2002,(4):6-8

颠簸是航空气上重要预告内容之一，历史上由于颠簸引起的飞行事故及征候占有一定的比例，颠簸预报也是气象预报的难点，颠簸对飞行的影响至关重要，轻则引起航行中的飞机摆动偏航，重则造成飞机解体，近年来随着太原机场卫星广播传真数值预报产品的使用，我们也在逐步尝试使用数值产品分析颠簸，使颠簸的预报有了明显提高。  相似文献   

滑坡治理中格构锚固结构的解析解分析   总被引：17，自引：0，他引：17  

许英姿  唐辉明 《地质科技情报》2002,21(3):89-93

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中  相似文献   

GPS进行长边控制测量分析     

王兴国 《福建地质》2002,21(2):119-121

采用基准和基准转换模型的不同会导致GPS观测边长与坐标计算边长不一致。因此由GPS测量的WGS－84坐标系向我国的北京54坐标系转换计算时，应尽可能选择参考点作对比分析。若满足精度要求，可采用全国精密参数作转换计算，若不能满足精度要求或达不到实测点的定位精度，可先将边长作高程异常改正，再对起算点作方位改正。  相似文献   

黑龙江省矿区生态破坏与地质灾害及其防治   总被引：3，自引：0，他引：3  

尹喜霖  王勇  张烽龙  郭有民 《工程地质学报》2002,10(3):254-259

黑龙江省矿产分布情况和开发概况以及矿业开发在经济发展中占有重要地位 ;在矿业开发过程中引起的诸多生态破坏和地质灾害及其引起的危害 ,已引起高度重视 ;本文在综合论述黑龙江省矿区发展所带来各项利弊后提出了具体的防治对策。  相似文献   

三峡工程库区巴东县赵树岭滑坡稳定性与防治对策研究   总被引：16，自引：2，他引：16  

唐辉明  马淑芝等 《地球科学》2002,27(5):621-625

赵树岭滑坡是三峡工程库区的重要滑坡，其稳定性直接关系到巴东新县城沿江大道的安全，并对新县城土地利用意义重大。在阐述赵树岭滑坡基本特征的基础上，运用水岩耦合三维有限元数值方法模拟了滑坡稳定性，预测了三峡水库蓄水后滑坡稳定性发展趋势和渗流特征。研究表明，水库蓄水及水位波动是影响滑坡稳定性的主要因素，三峡水库蓄水后，滑坡将发生局部失稳，必须加以治理，提出了滑坡防治的原则与对策。  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures     

A. S. Ahlawat  A. Ramaswamy 《地震工程与结构动力学》2002,31(7):1459-1479

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Study of a semi‐active stiffness damper under various earthquake inputs     

S. L. Djajakesukma  B. Samali  H. Nguyen 《地震工程与结构动力学》2002,31(10):1757-1776

Semi‐active stiffness damper (SASD) is one of many semi‐active control systems with the capability to mitigate the dynamic response using only a small amount of external power. The system consists of a hydraulic damper connected to the bracing frame in a selected story unit. In this paper, study of a SASD in two building models of five‐stories under four benchmark earthquake records is reported. The purpose of this study is to evaluate the effectiveness of the control system against structure type and varying earthquake inputs. Various control laws are chosen to work with SASD, such as: resetting control, switching control, linear quadratic regulator (LQR) and modified LQR, and the results are compared with no control and passive control cases. Numerical results show that the use of a SASD is effective in reducing seismic responses. Control effectiveness is dependent on the type of structure and earthquake excitation. Passive control is less effective than other control cases as expected. Resetting control, switching control and LQR generally perform similarly in response reduction. While modified LQR is more efficient and robust compared with other control algorithms. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

工业革命以来青藏高原与南极冰芯高分辨率甲烷记录对比研究     

徐柏青  姚檀栋  Chappellaz J 《冰川冻土》2002,24(5):477-483

自工业革命以来全球大气CH4含量呈快速的增长趋势, 但达索普冰芯记录所显示的北半球中低纬度地区大气CH4增长的启动时间要晚于极地冰芯记录近100 a. 由于受北半球人类活动CH4排放、CH4在大气中的寿命及大气中CH4的传输等过程的影响, 最近150 a以来, 中低纬度大气CH4与南极大气CH4含量在不同的时段表现出不同的净积累量和增长速率, 且20世纪两次世界大战期间达索普冰芯记录明确显示出人类活动排放的减缓使大气CH4呈负增长. 对比研究认为, 到20世纪中叶人类活动的甲烷排放已达到极高值, 中低纬度大气中CH4增长率及年积累逐步趋于平稳且略有降低. 可以认定, 工业革命以来中低纬度地区大气CH4与南极大气CH4含量的变化在不同的时段在受控于人类活动影响的同时, CH4在大气中的行为和传输过程以及东亚中低纬度季风气候的影响决定了两地之间大气CH4含量变化存在显著的差异.  相似文献   

渤海湾盆地北部奥陶纪岩相古地理   总被引：8，自引：0，他引：8  

金振奎  邹元荣  由伟丰  蒋春雷 《沉积学报》2002,20(1):13-19

渤海湾盆地北部主要包括黄骅坳陷、沧县隆起、冀中坳陷和下辽河坳陷,区内奥陶系厚 6 0 0～ 80 0m,主要由石灰岩和白云岩组成。下奥陶统分为冶里组和亮甲山组,中奥陶统分为下马家沟组、上马家沟组和峰峰组,上统缺失。其中下马家沟组、上马家沟组和峰峰组又进一步划分为下段和上段。早奥陶世冶里期和亮甲山期,本区以局限海环境为主,其内散布着一些潮坪和滩。中奥陶世,本区岩相古地理面貌变化旋回极为明显,下马家沟期早期潮坪广布,晚期以局限海为主;上马家沟期早期又是潮坪广布,晚期以开阔海为主;峰峰期早期潮坪广布,晚期又以开阔海为主。在奥陶纪,本区经历了 4个大的海侵-海退旋回,其中上马家沟期晚期是本区乃至整个华北地台的最大海侵期。  相似文献