Assessment of erosion and settling properties of fine sediments stored in cobble bed rivers: the Arc and Isère alpine rivers before and after reservoir flushing          下载免费PDF全文

C. Legout  I.G. Droppo  J. Coutaz  C. Bel  M. Jodeau 《地球表面变化过程与地形》2018,43(6):1295-1309

Cohesive sediment dynamics in mountainous rivers is poorly understood even though these rivers are the main providers of fine particles to the oceans. Complex interactions exist between the coarse matrix of cobble bed rivers and fine sediments. Given that fine sediment load in such environments can be very high due to intense natural rainfall or snowmelt events and to man‐induced reservoir or dam flushing, a better understanding of the deposition and sedimentation processes is needed in order to reduce ecohydrological downstream impacts. We tested a field‐based approach on the Arc and Isère alpine rivers combining measurements of erosion and settling properties of river bed deposits before and after a dam flushing, with the U‐GEMS (Gust Erosion Microcosm System) and SCAF (System Characterizing Aggregates and Flocs), respectively. These measurements highlight that critical shears, rates of erosion, settling velocities and propensity of particles to flocculate are highly variable in time and space. This is reflective of the heterogeneity of the hydrodynamic conditions during particle settling, local bed roughness, and nature and size of particles. Generally the deposits were found to be stable relative to what is measured in lowland rivers. It was, however, not possible to make a conclusive assessment of the extent to which the dynamics of deposits after reservoir flushing were different from those settled after natural events. The absence of any relationships between erosion and deposition variables, making it impossible to predict one from another, underlined the need to measure all of them to have a full assessment of the fine sediment dynamics and to obtain representative input variables for numerical models. While the SCAF was found to be effective, an alternative to the U‐GEMS device will have to be found for the erodibility assessment in cobble bed rivers, in order to make more rapid measurements at higher shears. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

浅析广安华蓥山区山水林田湖综合治理措施——以高顶山矿区为例     

李飞  裴云婧  王维  李德星  张春茂 《四川地质学报》2020,40(1):80-85

高顶山矿区位于广安华蓥市城区东南约5km处。长期的采矿活动,导致区内矿山地质环境问题突出,严重影响华蓥山地区人民的生命财产安全。矿山地质环境问题亟待解决。本文通过分析区内主要存在的矿山地质环境问题,提出通过矿山地质灾害、矿山土地恢复、矿山地形地貌景观恢复治理,河道综合整治、道路修复、生态保育、产业提升等措施;消除安全隐患,保障区内人民生命财产安全;改善生态环境,实现华蓥山地区生态环境全面恢复,生态环境质量提升,提高环境承载力,实现区内"山青、水秀、林美、田良"的目标。并对区内的产业转型升级进行了探讨,提出将高顶山矿区建设成具有科普和教育价值的旅游景观目的地;利用矿区独具特色工业人文景观和别致的自然景观,将高顶山矿区建设成集"科普、休闲、康养、户外、探秘"五大功能于一体的矿山公园,推动矿业经济转型升级,促进产业结构转型和经济社会可持续发展。  相似文献   

Bankfull Discharge Recurrence Interval in Gravel-bed Rivers     

F. Petit  A. Pauquet 《地球表面变化过程与地形》1997,22(7):685-693

Bankfull discharge was identified in some 30 gravel-bed rivers representing in total c. 40 gauging stations. The catchment sizes cary from 4km² to nearly 2700km². Bankfull discharge value increases with basin size. In the case of gravel-bed rivers developed on an impermeable substratum, the following equation emerges: Q_b=0·087 A^1·044. Bankfull discharge recurrence interval was determined by fitting maximum annual floods (T_a) into Gumbel's distribution and then using the partial duration series (T_p) in this same distribution. Recurrence interval is below 0·7 years (T_p) for small pebble-bed rivers developed on an impermeable substratum; it reaches 1·1 to 1·5 years when the catchment size of these rivers exceeds 250km². Rivers incised in the soft schists of the Famenne show larger channel capacity at bankfull stage, a small width/depth ratio and thus higher recurrence intervals (1·4–5·3 years with T_a and 1–4·4 years with T_p). Baseflow-dominated gravel-bed streams and sandy or silty rivers experience less frequent bankfull discharges, with a recurrence interval higher than 2 or even 3 years (T_p). © 1997 John Wiley & Sons, Ltd.  相似文献   

Characterizing hydrological processes within kettle holes using stable water isotopes in the Uckermark of northern Brandenburg,Germany     

Stuart Andrew Vyse  Majid Taie Semiromi  Gunnar Lischeid  Christoph Merz 《水文研究》2020,34(8):1868-1887

Understanding the hydrologic connectivity between kettle holes and shallow groundwater, particularly in reaction to the highly variable local meteorological conditions, is of paramount importance for tracing water in a hydro(geo)logically complex landscape and thus for integrated water resource management. This article is aimed at identifying the dominant hydrological processes affecting the kettle holes' water balance and their interactions with the shallow groundwater domain in the Uckermark region, located in the north-east of Germany. For this reason, based on the stable isotopes of oxygen (δ¹⁸O ) and hydrogen (δ²H ), an isotopic mass balance model was employed to compute the evaporative loss of water from the kettle holes from February to August 2017. Results demonstrated that shallow groundwater inflow may play the pivotal role in the processes taking part in the hydrology of the kettle holes in the Uckermark region. Based on the calculated evaporation/inflow (E/I) ratios, most of the kettle holes (86.7%) were ascertained to have a partially open, flow-through-dominated system. Moreover, we identified an inverse correlation between E/I ratios and the altitudes of the kettle holes. The same holds for electrical conductivity (EC) and the altitudes of the kettle holes. In accordance with the findings obtained from this study, a conceptual model explaining the interaction between the shallow groundwater and the kettle holes of Uckermark was developed. The model exhibited that across the highest altitudes, the recharge kettle holes are dominant, where a lower ratio of E/I and a lower EC was detected. By contrast, the lowest topographical depressions represent the discharge kettle holes, where a higher ratio of E/I and EC could be identified. The kettle holes existing in between were categorized as flow-through kettle holes through which the recharge takes place from one side and discharge from the other side.  相似文献   

Comparison of environmental tracers including organic micropollutants as groundwater exfiltration indicators into a small river of a karstic catchment     

Clarissa Glaser  Marc Schwientek  Tobias Junginger  Benjamin Silas Gilfedder  Sven Frei  Martina Werneburg  Christian Zwiener  Christiane Zarfl 《水文研究》2020,34(24):4712-4726

Understanding groundwater–surface water (GW–SW) interactions is vital for water management in karstic catchments due to its impact on water quality. The objective of this study was to evaluate and compare the applicability of seven environmental tracers to quantify and localize groundwater exfiltration into a small, human-impacted karstic river system. Tracers were selected based on their emission source to the surface water either as (a) dissolved, predominantly geogenic compounds (radon-222, sulphate and electrical conductivity) or (b) anthropogenic compounds (predominantly) originating from wastewater treatment plant (WWTP) effluents (carbamazepine, tramadol, sodium, chloride). Two contrasting sampling approaches were compared (a) assuming steady-state flow conditions and (b) considering the travel time of the water parcels (Lagrangian sampling) through the catchment to account for diurnal changes in inflow from the WWTP. Spatial variability of the concentrations of all tracers indicated sections of preferential groundwater inflow. Lagrangian sampling techniques seem highly relevant for capturing dynamic concentration patterns of WWTP-derived compounds. Quantification of GW inflow with the finite element model FINIFLUX, based on observed in-stream Rn activities led to plausible fluxes along the investigated river reaches (0.265 m³ s⁻¹), while observations of other natural or anthropogenic environmental tracers produced less plausible water fluxes. Important point sources of groundwater exfiltration can be ascribed to locations where the river crosses geological fault lines. This indicates that commonly applied concepts describing groundwater–surface water interactions assuming diffuse flow in porous media are difficult to transfer to karstic river systems whereas concepts from fractured aquifers may be more applicable. In general, this study helps selecting the best suited hydrological tracer for GW exfiltration and leads to a better understanding of processes controlling groundwater inflow into karstic river systems.  相似文献   

Sediment flux-driven channel geometry adjustment of bedrock and mixed gravel–bedrock rivers     

Edwin R.C. Baynes  Dimitri Lague  Philippe Steer  Stéphane Bonnet  Luc Illien 《地球表面变化过程与地形》2020,45(14):3714-3731

Sediment supply (Q_s) is often overlooked in modelling studies of landscape evolution, despite sediment playing a key role in the physical processes that drive erosion and sedimentation in river channels. Here, we show the direct impact of the supply of coarse-grained, hard sediment on the geometry of bedrock channels from the Rangitikei River, New Zealand. Channels receiving a coarse bedload sediment supply are systematically (up to an order of magnitude) wider than channels with no bedload sediment input for a given discharge. We also present physical model experiments of a bedrock river channel with a fixed water discharge (1.5 l min⁻¹) under different Q_s (between 0 and 20 g l⁻¹) that allow the quantification of the role of sediment in setting the width and slope of channels and the distribution of shear stress within channels. The addition of bedload sediment increases the width, slope and width-to-depth ratio of the channels, and increasing sediment loads promote emerging complexity in channel morphology and shear stress distributions. Channels with low Q_s are characterized by simple in-channel morphologies with a uniform distribution of shear stress within the channel while channels with high Q_s are characterized by dynamic channels with multiple active threads and a non-uniform distribution of shear stress. We compare bedrock channel geometries from the Rangitikei and the experiments to alluvial channels and demonstrate that the behaviour is similar, with a transition from single-thread and uniform channels to multiple threads occurring when bedload sediment is present. In the experimental bedrock channels, this threshold Q_s is when the input sediment supply exceeds the transport capacity of the channel. Caution is required when using the channel geometry to reconstruct past environmental conditions or to invert for tectonic uplift rates, because multiple configurations of channel geometry can exist for a given discharge, solely due to input Q_s. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd  相似文献   

Evaluation of aquatic ecological systems through dynamics of ichthyofaunal diversity in a Himalayan torrential river,Murti     

《Limnologica》2020

The biodiversity hotspot region of the Eastern Himalayas consists of a vast freshwater network enriched with species diversity. Many small-scale torrential rivers and water reaches contribute to the species pool of all the major rivers by converging downstream. These reaches are most likely to be degraded at a faster rate as compared to the large-scale rivers following an increased rate of urbanization, habitat alterations, and changing climatic conditions. Therefore, this study aims to explore River Murti, which is a representative small scale river system characterized by a large altitudinal gradient and a diverse watershed area. Ichthyofaunal diversity (i.e., diversity, evenness & richness) and 21 environmental variables are measured through a tri-seasonal sampling effort conducted along 14 selected locations. A total of 41 fish species (including species belonging to 4 Near Threatened, 8 Vulnerable, and 1 Endangered) are found inhabiting this river. Ichthyofaunal assemblage is found to be primarily modulated by habitat diversity and landscape variables. Three Aquatic Ecological Systems (AES) have been identified along this river in a top-down approach based on recorded environmental variables. We have calculated an observed/expected ratio for each diversity indices along 14 locations based on predicted temporal variability using boosted regression (BRT) models. The evaluation of diversity status has been kept at 0.5 to account for a 50% loss or deviation from observed (O/E50). This evaluation has been successfully used to delineate AES1 with majorly “Impaired” status and thus ensures its importance in terms of species conservation. Our study indicates the contribution of 11 major environmental drivers modulating the species assemblage patterns in these AES. Amongst them, altitude, substrate coarseness, river morphology, and shelter availability are strongly associated with species diversity as per the BRT models. These underlying factors are also correlated with “basin pressure,” suggesting that anthropogenic disturbances, as well as the changing climate, might play an important role in the gradual change in environmental conditions, which in turn could cause a shift in species assemblage structure.  相似文献   

坦噶尼喀湖东北部入湖河流表层沉积物中磷的形态和分布特征   总被引：4，自引：0，他引：4  

余成  陈爽  张路  王兆德  申秋实  高群 《湖泊科学》2017,29(2):334-342

磷是坦噶尼喀湖生态系统中必不可少的营养元素,直接决定湖体初级生产力的高低,进而影响到周边居民对于动物蛋白的获取来源.为了解坦噶尼喀湖磷的外源输入,选择湖泊东北部的入湖河流,对表层沉积物(16个样点)中总磷(TP)和各形态磷含量及其分布特征进行分析,并探讨磷的形态分布特征与土地利用方式之间的相关关系.结果表明,入湖河流沉积物TP含量为73.05~239.94 mg/kg,平均含量为152.64±55.37 mg/kg,其中最高值出现在马拉加拉西河口.采用Psenner法对磷进行连续浸提并比较不同形态磷含量,由高及低依次为铁铝结合态磷(Fe/Al-P)钙结合态磷(CaP)有机磷(Org-P)残渣态磷(Res-P)弱吸附态磷(Labile-P).土地利用类型对TP及各形态磷含量影响较大,其中TP含量表现为河口湿地城镇附近林草地区,表明地表径流和人类活动会对TP含量产生影响,而对于不同形态磷含量,Laible-P、Fe/Al-P、Org-P含量均表现为河口湿地林草地城镇附近,Ca-P、Res-P含量均表现为城镇附近河口湿地林草地.分析沉积物理化性质与各磷形态之间的相关性,发现沉积物总氮(TN)、有机质和总有机碳与Fe/Al-P、LabileP和TP相关性较好,与Org-P、Ca-P和Res-P相关性较差,表明TN和有机质的输入,会伴随沉积物中磷含量的升高,其增量的赋存形态主要为氧化还原敏感态磷和Labile-P.沉积物粒径组成与各磷形态含量存在相关性,细粒径沉积物与各形态磷含量呈显著正相关,粗粒径沉积物与各形态磷呈显著负相关,表明细小颗粒更易吸附磷.  相似文献   

Revisiting the morphological method in two-dimensions to quantify bed-material transport in braided rivers     

Gilles Antoniazza  Maarten Bakker  Stuart N. Lane 《地球表面变化过程与地形》2019,44(11):2251-2267

Research in the 1990s showed that bed-material transport rates could be estimated at the reach scale in both one-dimension and, over small spatial scales (10s of m), in two-dimensions. The limit on the latter was the spatial scale over which it was possible to obtain distributed data on morphological change. Here, we revisit the morphological method given progress in both topographical data acquisition and hydraulic modelling. The bed-material transport needed to conserve mass is calculated in both one and two dimensions for a 1600 m × 300 m Alpine braided river “laboratory”. High-resolution topographical data were acquired by laser scanning to quantify Digital Elevation Models (DEMs), and morphological changes caused by the flushing of the water intake were derived from repeated surveys. Based on DEMs of differences, 1D bed-material transport rates were calculated using the morphological method. Then, a 2D hydraulic model was combined with a topographic correction to route sediment through the network of braided channels and to obtain a spatially variable estimate of transport in both downstream and cross-stream directions. Monte Carlo simulation was applied to the routing model parameters, allowing identification of the most probable parameter values needed to minimize negative transport. The results show that within-section spatial compensation of erosion and deposition using the 1D treatment leads to substantial local errors in transport rate estimates, to a degree related to braiding intensity. Even though the 2D application showed that a large proportion of the total transport was actually concentrated into one main channel during the studied low flow event, the proportion of transport in secondary anabranches is substantial when the river starts braiding. Investigations of the effects of DEM resolution, competent flow duration and survey frequency related to ‘travelling bedload’ and sequential erosion-deposition emphasized the critical importance of careful data collection in the application of the morphological method. © 2019 John Wiley & Sons, Ltd.  相似文献   

Flow resistance and hydraulic geometry in bedrock rivers with multiple roughness length scales     

Robert I. Ferguson  Richard J. Hardy  Rebecca A. Hodge 《地球表面变化过程与地形》2019,44(12):2437-2449

Many models of incision by bedrock rivers predict water depth and shear stress from discharge; conversely, palaeoflood discharge is sometimes reconstructed from flow depth markers in rock gorges. In both cases, assumptions are made about flow resistance. The depth–discharge relation in a bedrock river must depend on at least two roughness length scales (exposed rock and sediment cover) and possibly a third (sidewalls). A conceptually attractive way to model the depth–discharge relation in such situations is to partition the total shear stress and friction factor, but it is not obvious how to quantify the friction factor for rough walls in a way that can be used in incision process models. We show that a single flow resistance calculation using a spatially averaged roughness length scale closely approximates the partitioning of stress between sediment and rock, and between bed and walls, in idealized scenarios. Both approaches give closer fits to the measured depth–discharge relations in two small bedrock reaches than can be achieved using a fixed value of Manning's n or the Chézy friction factor. Sidewalls that are substantially rougher or smoother than the bed have a significant effect on the partitioning of shear stress between bed and sidewalls. More research is needed on how best to estimate roughness length scales from observable or measurable channel characteristics. © 2019 John Wiley & Sons, Ltd.  相似文献