A Statistical Analysis on the E ect of Vertical Wind Shear on Tropical Cyclone Development          下载免费PDF全文

ZHAO Bin  DUAN Yihong  YU Hui  DU Bingyu 《Acta Meteorologica Sinica》2006,20(3):383-388

Using tropical cyclone (TC) best track and intensity of the western North Pacific data from the Joint TyphoonWarning Center (JTWC) of the United States and the NCEP/NCAR reanalysis data for the period of 1992-2002, the effects of vertical wind shear on TC intensity are examined. The samples were limited to the westward or northwestward moving TCs between 5°N and 20°N in order to minimize thermodynamic effects. It is found that the effect of vertical wind shear between 200 and 500 hPa on TC intensity change is larger than that of the shear between 500 and 850 hPa, while similar to that of the shear between 200 and 850 hPa. Vertical wind shear may have a threshold value, which tends to decrease as TC intensifies. As the intensifying rate of TC weakens, the average shear increases. The large shear has the obvious trend of inhibiting TC development. The average shear of TC which can develop into typhoon (tropical depression or tropical storm) is below 7 m s-1 (above 8 m s-1).  相似文献   

Extension of the Griffith's fracture criteria to saturated clays     

K.M. Dgu  M. Souli  B. Ladanyi 《国际地质力学数值与分析法杂志》2003,27(4):275-288

Inglis [1] has solved the problem of distribution of stress in an elastic plate around an elliptical hole. His works clarify the role of cracks in the failure of an elastic material. However, his solution cannot be applied to saturated clay because he considers only total stresses, while, in saturated clay, the criterion of rupture should be expressed in terms of effective and not total stresses. The solution of Atkinson and Craster [2] using Biot's poroelasticity theory, shows that there is no high pore pressure in the vicinity of the crack tips for saturated clay. The major difference between this approach and the Biot's theory of is that, in saturated clay, strain is a function of the variation of the effective stress [3], while, in poroelastic media, strain is only a function of the variation of the total stress [4, Equation 2.2]. Also in their solution there is continuity between the pore fluid and the inner fluid in the crack. Their solution is valid for poroelastic media involving a movement of the pore fluid. In our solution there is no movement of the pore fluid (Undrained condition). In this paper we have solved the same problem as Inglis [1], but for the particular case of saturated clay obeying elastic law. By solving this problem we obtained the expressions for pore pressure, effective stress, total stress and displacements. The results show that not only the total stress but also the pore pressure and the effective stress are also high in the vicinity of the crack tips. A new failure criterion, based on Griffith's strain energy principle [5] and maximum tensile stress [6], valid for saturated clay is developed in this paper. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

滚动轴承内外圈滚道的磁力研磨研究     

张世亮 《广东海洋大学学报》1994,(1)

采用直流励磁装置、磁性磨料及工件共同构成磁加工系统。磁性磨料在磁场的作用下，对轴承内、外圈滚道以磁刷的形式进行研磨。由于磨料的可流动性，加工时既能满足对被加工表面粗糙度的加工要求，又能较好地保持工件原有的形位精度；且加工后在被加工表面形成一定的压应力，使工件的抗疲劳强度提高，使用寿命延长。  相似文献   

Structural and metamorphic controls on the distribution of zircon in an evolving quartzofeldspathic migmatite: an example from the Reynolds Range, central Australia     

P. DIRKS  M. HAND 《Journal of Metamorphic Geology》1991,9(2):191-201

Three types of zircon occur in a complexly deformed and variably migmatized quartzofeldspathic gneiss from the Reynolds Range, central Australia. The oldest type is inherited from the granitic precursor of the gneiss, and is overgrown by a second group of zircon grains that formed during prograde, granulite facies metamorphism. Partial melting of the gneiss resulted in solution of both the inherited and metamorphic zircon. No new zircon growth accompanied crystallization of the partial melt, suggesting loss of zirconium–rich residual fluids. Hydrous, amphibolite facies retrogression of the gneiss and its migmatized variants during late shearing produced new, idiomorphic zircon in both the shear zone and its wall rocks.
Important implications of this study are that (i) zircon has a tendency to dissolve if it comes into direct contact with a melt produced from anhydrous biotite breakdown in a quartzofeldspathic granulite, (ii) melt crystallization is not necessarily accompanied by zircon growth, and (iii) euhedral zircon can grow from a hydrous fluid phase under subsolidus, amphibolite facies conditions, e.g. within shear zones.  相似文献   

长江三峡及邻区板内中强地震的孕震动力学分析     

张秋文 《大地测量与地球动力学》1994,(4)

本文在研究长江三峡及邻区地壳─上地幔结构和现今地壳重力场基础上，分析了该区板内中强地震的孕震动力学过程，探讨了整体上相对稳定的长江三峡及邻区孕育和发生中强地震的动力学机制，并提出了该区板内中强地震预测的动力学标志。  相似文献   

推覆构造滑脱层有限变形力学分析     

杨成永 《大地测量与地球动力学》1993,(4)

本文根据推覆构造滑脱层的变形特点,运用以S—R分解定理为基础的有限变形力学理论,研究了断坪与断坡滑脱层的变形场特征。用全量及增量方法逆解求出了变形滑脱层所受的边界外力;利用变形场与应力场的分析结果,给出了推覆构造在拆离时推覆席体的推移距离及作用推力的简捷计算公式。  相似文献   

Effects of applied stress on effective elastic anisotropy in cracked solids     

Evgenyi M. Chesnokov  Sergei V. Zatsepin 《Geophysical Journal International》1991,107(3):563-569

  相似文献   

利用复测水准资料寻求反映地壳纯形变的定量指标     

崔笃信 《大地测量与地球动力学》1994,(1)

地壳纯变形分为剪切变形和扩张变形。在前人研究的基础上提出了仅利用复测水准资料求出描述地壳剪切变形和扩张变形指标的方法和步骤，所得的定量指标不受基准的影响，受测量累积误差的影响亦很小，能客观地反映地壳变形的特征。通过理论和实例证明：以一点周围变形分量的最大值代表该点周围垂直面的变形程度比其平均值更能突出变形信息。最后根据实例计算结果分析了剪切变形分量、扩张变形分量与形变速率、构造地震的关系。  相似文献   

Petrology, geochronology, and tectonics of shear zones in the Zermatt–Saas and Combin zones of the Western Alps     

I. Cartwright  A. C. Barnicoat 《Journal of Metamorphic Geology》2002,20(2):263-281

Metre to tens‐of‐metre wide, steeply dipping, greenschist facies shear zones that cut blueschists and eclogites of the Combin and Zermatt–Saas Zones at Täschalp and in adjacent areas of the western Alps were sites of extensive recrystallization driven by fluid flow and deformation. Rb–Sr data imply that these shear zones formed at 42–37 Ma with a systematic younging of structures northward toward, and into, the hangingwall of the Mischabel Structure. Shearing commenced at 400–475 °C and 400–500 MPa and continued as pressures and temperatures fell to 300–350 °C and 300–350 MPa. Individual shear zones were active for 2–3 Myr with later lower grade stages of shearing concentrated into narrow zones. Fluids that infiltrated the shear zones were water rich (X_H2O > 0.9). Alteration zones around albite veins and at the margins of serpentinite bodies are penecontemporaneous with these shear zones and formed at approximately the same conditions. The eclogites were exhumed from c. 64 km at 44 Ma to 14–16 km at 42–41 Ma implying exhumation rates of 2–5 cm yr^?1. Rapid exhumation was probably achieved by extension aided by buoyancy, following subduction of continental crust, and rapid erosion. The shear zones form part of a regional‐scale extensional system responsible for a significant portion of the exhumation of the subducted oceanic crust.  相似文献   

新疆尾亚韧性剪切带的基本特征及其意义     

邵铁全  刘云焕  董玉书 《地球科学与环境学报》2001,23(4):28-32

尾亚韧性剪切带形成于石炭纪晚期.根据其宏观变形构造、显微变形构造等变形特征,说明其经历了早期的推覆剪切和后期的右行推覆剪切两个主要演化阶段.对该区的构造演化及指导找矿增添了一点新的内容.  相似文献