痕量铁和锰的化学发光检测   总被引：5，自引：1，他引：5  

周延秀  朱果逸 《岩矿测试》1997,16(3):221-228

评述了国内外有关铁、锰的化学发光分析进展。从发光体系、操作方式、最佳条件、干扰离子、检测限等各个方面对化学发光法测定铁、锰及其它们与其它组分同时测定中的应用进行分类评述。  相似文献   

榴辉岩中铁铝榴石的测定方法研究   总被引：3，自引：1，他引：3  

黄宝贵  柳建春 《岩矿测试》1997,16(4):241-244254

对国内主要矿区铁铝石榴子石纯矿物中铁的价态规律进行了研究。证明其所含Ｆｅ均以Ｆｅ＾２＋为主，其质量分数在８３－９４，并将Ｆｅ＾２＋这特征性成分用于某地榴辉岩中铁铝榴石的间接测定，获得结果与焙烧磁化－磁选法一致且精度好，较磁化法简便，快速。  相似文献   

湘西南区氧化锰矿成矿规律及找矿方向     

魏道芳 《湖南地质》1996,15(3):143-146

湘西南区氧化锰矿以锰帽型氧化锰矿为主，赋矿地层为震旦系下统湘锰组。其特点是含锰点多，分布面广，矿体在地壳贫化，往下３～７ｍ开始富集，氧化深度４０ｍ左右。  相似文献   

低温条件下有机酸对铁、铜的淋滤实验研究     

张海祥  王玉荣  梅厚钧 《矿床地质》1997,16(1):86-92

水／岩作用实验研究表明，在低温条件下柠檬酸、草酸和酒石酸对岩石中的铁、铜都有很高的淋滤率。这表明，在表生地质作用过程中有机酸对成矿元素有很强的活化能力。实验研究同时发现，有机酸对成矿元素的活化能力受其分解温度的限制，由于大部分有机酸的分解温度都在２５０℃以下，因而有机酸对成矿元素的活化仅限于低温条件。本次研究还显示，判断一种岩石能否成为矿源层，不能简单的以其中成矿元素的含量高低作为标准，其中更关键的因素是元素在岩石中的存在形式，如果成矿元素在岩石中难以活化的形式存在，那么含量再高也无法提供成矿物质  相似文献   

西昆仑山南侧甜水海湖岩芯铁变化的环境记录   总被引：11，自引：0，他引：11  

余素华  李世杰 《地球化学》1997,26(6):88-98

阐述了青藏高原西昆仑山南侧甜水海湖岩芯沉积物中氧化铁的丰度、频率分布和富集系数的变化规律。其丰度值范围FeO0．39％-3.95％，平均值为1．25％；Fe2O30．44％－8．09％，平均值为2．60％；Fe2O3／FeO0．21－3．60，平均比值1．12。说明该彻岩芯沉积物中铁平均丰度值较低，但其变化幅度较宽且清楚，在一定程度上反映了古气候环境具有较大幅度的波动。变异系数值表明，该湖岩芯沉积物中FeO的离散程度较Fe2O3大。大约距今23万年来氧化铁的沉积地球化学特征可划分出7个环境演化阶段，并基本上可与深海氧同位索阶段对比。揭示了甜水海湖演化与青藏高原强烈隆升引起的气候环境改变的密切关系。在距今23一15万年，沉积以河流相或冲积、洪积相为主，沉积环境以氧化环境为主导，气候以温干型波动；在距今15－7．4万年，沉积以湖相为主，沉积环境以还原环境为主导，气候以温湿型为主；在距今74万年以来，湖盆沉积环境多样化，沉积物以湖相和近源冲积、洪积相交替出现。气候出现冷湿、冷干、温湿和温干多种波动模式。这些资料分析初步认为甜水海古湖大约形成于距今15万年，即青藏高原第三成湖期，这也与青藏高原在距今15万年左右的再次构造隆升有关。  相似文献   

碳酸锰氧化实验和热力学分析     

郝瑞霞  关广岳 《地质论评》1997,43(2):167-172

通过对碳酸锰氧化实验的结果分析和讨论，建立了一种适合于锰氧化过程的非平衡热力学模型，并利用此模型对硫酸锰氧化过程作了热力学可行性分析，研究结果表明，碳酸锰氧化过程是矿物组合的变化过程，也是锰自身价态的转为过程，整个过程既存在平衡状态，又存在非平衡状态，是一个不可逆的，多相的复杂反应。  相似文献   

Composition and Assemblage Characteristics of Magnetic Minerals in Layer S_(5-1) of Xifeng and Duanjiapo Sections     

贾蓉芬  彭先芝  周正  刘德汉  王冠鑫  王德强 《中国地球化学学报》2004,23(3)

Magneticmineralsintheloess paleosolseriesaccountforabout 1 % -2 %ofthetotal (LiuTungshengandZhangZhonghu ,1 962 ) .Duetotheiraerolianorigin ,themagneticmineralsarecomplicatedincomposition ,largeingrainsizerange ,andsignificantlydifferentincrystallinity .Asaresult,researchonthesemagneticmineralswouldbesetwithalotofdifficulties.Previousre searchersemployedopticalmicroscopic ,X raydiffractionandM ssbauerspectrometrictechniquestostudythemagneticmineralsintheloess paleosolseries,andchieflyontheb…  相似文献   

Iron oxidation state in lower mantle mineral assemblages: II. Inclusions in diamonds from Kankan, Guinea     

C.A McCammon  T Stachel 《Earth and Planetary Science Letters》2004,222(2):423-434

Inclusions of ferropericlase and former (Mg,Fe)(Si,Al)O₃ perovskite in diamonds from Kankan, Guinea believed to originate in the lower mantle were studied using Mössbauer spectroscopy to determine Fe³⁺/ΣFe. Fe³⁺ concentration in the (Mg,Fe)(Si,Al)O₃ inclusion is consistent with empirical relations relating Fe³⁺/ΣFe to Al concentration, supporting the inference that it crystallised in the perovskite structure at lower mantle conditions. In ferropericlase there is a nearly linear variation of trivalent cation abundance with monovalent cation abundance, suggesting a substitution of the form Na_0.5M_0.5³⁺O (M=Fe³⁺, Cr³⁺, Al³⁺). Excess positive charge is likely balanced by cation vacancies, where their abundance is observed to increase with increasing iron concentration, consistent with high-pressure experiments. The abundance of cation vacancies is related to oxygen fugacity, where ferropericlase inclusions from Kankan and São Luiz (Brazil) are inferred to have formed at conditions more oxidising than Fe-(Mg,Fe)O equilibrium, but more reducing than Re-ReO₂ equilibrium. Fe²⁺/Mg partition coefficients between (Mg,Fe)(Si,Al)O₃ and ferropericlase were calculated for inclusions co-existing in the same diamond using Mössbauer data and empirical relations based on high-pressure experimental work. Most values are consistent with high-pressure experiments, suggesting that these inclusions equilibrated at lower mantle conditions. The measured ferropericlase Fe³⁺ concentrations are consistent with diamond formation in a region of redox gradients, possibly arising from the subduction of oxidised material into reduced lower mantle. Reduction of carbonate to form ferropericlase and diamond is consistent with a slight shift of Kankan δ¹³C values to isotopically heavy compositions compared to the worldwide dataset, and could supply the oxygen necessary to satisfy the high Fe³⁺ concentration in (Mg,Fe)(Si,Al)O₃ perovskite, as well as account for the high proportion of ferropericlase in the lower mantle paragenesis. The heterogeneity of lower mantle diamond sources indicates that the composition of lower mantle diamonds do not necessarily reflect those of the bulk mantle.  相似文献   

Effet de la teneur en eau d'un sol sur la réduction bactérienne d'oxydes de fer     

Sébastien J. Stemmler  Stéphanie Loyaux-Lawniczak  Jacques Berthelin 《Comptes Rendus Geoscience》2004,336(13):1171-1179

Iron-reducing activity of autochthonous bacteria from two temporary hydromorphic soils is evaluated by the study of iron reductive dissolution, as a function of water content. The release of ferrous iron in solution is coupled to the mineralization of soil organic carbon. Water soil saturation is not necessary for iron reductive dissolution, since the highest dissolution is obtained for a wet, but not water-saturated soil (100% of water holding capacity WHC), and dissolution is also very high in a soil at 75% WHC. To cite this article: S.J. Stemmler et al., C. R. Geoscience 336 (2004).  相似文献   

Dust production and the release of iron oxides resulting from the aeolian abrasion of natural dune sands     

Joanna E. Bullard  Kevin White 《地球表面变化过程与地形》2005,30(1):95-106

Global dust trajectories indicate that signi?cant quantities of aeolian‐transported iron oxides originate in contemporary dryland areas. One potential source is the iron‐rich clay coatings that characterize many sand‐sized particles in desert dune?elds. This paper uses laboratory experiments to determine the rate at which these coatings can be removed from dune sands by aeolian abrasion. The coatings impart a red colour to the grains to which previous researchers have assigned variable geomorphological signi?cance. The quantities of iron removed during a 120 hour abrasion experiment are small (99 mg kg^?1) and dif?cult to detect by eye; however, high resolution spectroscopy clearly indicates that ferric oxides are released during abrasion and the re?ectance of the particles alters. One of the products of aeolian abrasion is ?ne particles (<10 µm diameter) with the potential for long distance transport. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献