Comparison of Liquid Water Content Retrievals for Airborne Millimeter-Wave Radar with Different Particle Parameter Schemes     

崔新东  姚志刚  赵增亮  王敏威  范春晖  苏涛 《热带气象学报(英文版)》2020,26(2):188-198

In the application of the physical iterative method to retrieve millimeter-wave radar liquid water content(LWC) and liquid water path(LWP), particle parameter scheme is the main factor affecting retrieval performance. In this paper, synchronous measurements of an airborne millimeter-wave radar and a hot-wire probe in stratus cloud are used to compare the LWC retrievals of the oceanic and continental particle parameter scheme with diameter less than 50μm and the particle parameter scheme with diameter less than 500μm and 1500μm(scheme 1, scheme 2, scheme 3, and scheme4, respectively). The results show that the particle parameter scheme needs to be selected according to the reflectivity factor when using the physical iterative method to retrieve the LWC and LWP. When the reflectivity factor is less than-30 d BZ, the retrieval error of scheme 1 is the minimum. When the reflectivity factor is greater than-30 d BZ, the retrieval error of scheme 4 is the minimum. Based on the reflectance factor value, the LWP retrievals of scheme 4 are closer to the measurements, the average relative bias is 5.2%, and the minimum relative bias is 4.4 %. Compared with other schemes,scheme 4 seems to be more useful for the LWC and LWP retrieval of stratus cloud in China.  相似文献   

1208号台风“韦森特”异常路径及其对珠三角南部暴雨影响成因分析   总被引：1，自引：0，他引：1  

方宇凌  夏冠聪  林泽金  麦建华 《广西气象》2013,(4):1-8,I0001

利用1°×1°NCEP再分析资料、全省遥测站资料、卫星云图、香港雷达图等资料,分析台风“韦森特”的环流背景场、物理量场特征,找出“韦森特”在南海中北部原地摆动和对珠三角南部强降水过程的物理成因：“韦森特”的原地摆动,与副热带高压、南海中部海温、还有台风内在的云系和风场结构的不对称有关;珠三角地区两侧附近存在弱的水汽通量辐合,在降水中心附近存在明显的上升运动,低层辐合、高层辐散,另外垂直螺旋场与降水中心的第一段降水期具有很好的对应关系.  相似文献   

浙西南热带气旋强降水主要影响因子     

林巧燕  郭品文  周国华  江剑霞 《气象科技》2013,41(1):121-125

对1950-2010年影响浙西南的热带气旋降水的移动路径、影响时间、强度、西风槽、西南季风以及地形等主要因子进行分析.结果表明:在玉环南-厦门一带登陆的热带气旋是影响浙西南的热带气旋中正面影响浙西南的类型,影响时间和最大平均过程降雨量、最大过程雨量存在着正相关关系,热带气旋的强度与其降水强度相关性较高.西风槽的存在不仅影响着热带气旋路径的变化,其槽前的西南气流也为热带气旋降水提供充足的水汽,同时槽后冷空气与热带气旋相结合,使丽水的西北部出现另一个强降水中心.西南季风为登陆后的热带气旋提供了水汽条件,使降水得到增幅.浙西南独特的地形,使在厦门以北到玉环以南登陆后西进、西北行或西北行后在120°E以西转向北上的热带气旋迎着山脉进入,降水强度明显加强.  相似文献   

Microstructure,metamorphism, thermochronology and P-T-t-deformation history of the Port aux Basques gneisses,south-west Newfoundland,Canada*     

J. L. BURGESS  M. BROWN  R. D. DALLMEYER  C. R. VAN STAAL 《Journal of Metamorphic Geology》1995,13(6):751-776

Abstract The Port aux Basques gneisses comprise three lithostratigraphic units separated by major fault zones: the Grand Bay Complex; the Port aux Basques Complex; and the Harbor le Cou Group. A similar regionally developed polyphase history of penetrative deformation characterizes each of these units. Thickening during D1 produced rare recumbent folds (F1) and an axial planar schistosity (S1), overprinted by D2 recumbent folds (F2), and transposed during development of a locally penetrative, differentiated crenulation cleavage (S2). In western sectors of the area, D2 was associated with NW-directed reverse shearing. The NE-trending structural grain reflects D3 transpression, partitioned into dextral transcurrent movement along major shear zones and development of upright-to-steeply inclined, periclinal folds (F3) and a variably penetrative schistosity (S3). Amphibolite facies metamorphism increases in grade from west to east across the area. Microstructures, including porphyroblast-matrix foliation relations and internal textural unconformities in garnet, indicate episodic porphyroblast nucleation and growth, which reflect a prograde traverse sequentially across univariant reactions during syntectonic metamorphism. Garnet, kyanite and staurolite porphyroblasts are wrapped by the S2 foliation, but each may contain trails of inclusions that define S1; commonly these trails preserve early stages of S2 crenulation cleavage development. Progressive and sequential reaction out of kyanite, staurolite and muscovite in favour of sillimanite, garnet, biotite and K-feldspar, and the development of an increasing volume of anatectic migmatite in south-eastern sectors of the area record syn- to late-D2 peak metamorphic conditions. Microstructural relationships and petrogenetic grid considerations indicate clockwise trajectories in P-T space for units of the Port aux Basques gneisses. Peak metamorphic conditions are estimated to have been 620–650° C at ≤8kbar in the west and 700–750° C at ≤8 kbar in the east. Titanite from an upper amphibolite facies calc-silicate gneiss yields U-Pb ages of c. 420 Ma, interpreted to date cooling shortly after the thermal peak in these gneisses. Variable D3 strain was associated with some recrystallization of hornblende and micas. ⁴⁰Ar/³⁹Ar hornblende plateau isotope correlation ages range from c. 419 to c. 393 Ma, from east to west across the area, and are interpreted to record cooling through c. 500° C coeval with or soon after D3 deformation. The range in ages may record the effects of heterogeneous D3 deformation and differential uplift from south-east to north-west associated with displacement on major shear zones. ⁴⁰Ar/³⁹Ar muscovite plateau ages cluster at c. 390 Ma, and date cooling through c. 375° C during regional exhumation. Cooling rates are moderate to fast and may indicate a component of tectonic exhumation. The Port aux Basques gneisses are a product of Silurian collisional tectonics. The higher grade of metamorphism in comparison with adjacent areas of the Canadian Appalachians is interpreted to reflect greater thickening due to juxtaposition of the St Lawrence promontory (Laurentian margin) with the Cabot promontory (Avalonian margin) during closure of the Iapetus Ocean.  相似文献   

Delayed plastic model for time‐dependent behaviour of materials     

Tsutomu Namikawa 《国际地质力学数值与分析法杂志》2001,25(6):605-627

A delayed plastic model, based on the theory of plasticity, is proposed to represent the time‐dependent behaviour of materials. It is assumed in this model that the stress can lie outside the yield surface and the conjugate stress called static stress is defined on the yield surface. The stress–strain relation is calculated based on the plastic theory embedding the static stress. Thus, the stress–strain relation of the model practically corresponds to that of the inviscid elastoplastic model under fairly low rate deformation. The delayed plastic model is coupled with the Cam‐clay model for normally consolidated clays. The performance of the model is then examined by comparing the model predictions with reported time‐dependent behaviour of clays under undrained triaxial conditions. It is shown that the model is capable of predicting the effect of strain rate during undrained shear and the undrained creep behaviour including creep rupture. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Inference of a detailed P–T path from P–T pseudosections using metapelitic rocks of variable composition from a single outcrop, Shackleton Range, Antarctica     

A. Zeh 《Journal of Metamorphic Geology》2001,19(4):329-350

Generally, P–T pseudosections for reduced compositional systems, such as K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, Na₂O–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O and MnO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O, are well suited for inferring detailed P–T paths, comparing mineral assemblages observed in natural rocks with those calculated. Examples are provided by P–T paths inferred for four metapelitic samples from a 1 m² wide outcrop of the Herbert Mountains in the Shackleton Range, Antarctica. The method works well if the bulk composition used is reconstituted from average mineral modes and mineral compositions (AMC) or when X‐ray fluorescence (XRF) data are corrected for Al₂O₃ and FeO. A plagioclase correction is suitable for Al₂O₃. Correction for FeO is dependent on additional microscopic observations, e.g. the kind and amount of opaque minerals. In some cases, all iron can be treated as FeO^tot, whereas in others a magnetite or hematite correction yields much better results. Comparison between calculated and observed mineral modes and mineral compositions shows that the AMC bulk composition is best suited to the interpretation of rock textures using P–T pseudosections, whereas corrected XRF data yield good results only when the investigated sample has few opaque minerals. The results indicate that metapelitic rocks from the Herbert Mountains of the Northern Shackleton Range underwent a prograde P–T evolution from about 600 °C/5.5 kbar to 660 °C/7 kbar, followed by nearly adiabatic cooling to about 600 °C at 4.5 kbar.  相似文献   

Gedrite–garnet–sillimanite-bearing granulites from Amessmessa area, south In Ouzzal, Hoggar, Algeria     

K. OUZEGANE  S. DJEMAI  M. GUIRAUD 《Journal of Metamorphic Geology》1996,14(6):739-753

Some granulites from the Amessmessa area (south In Ouzzal unit, Hoggar) contain the peak assemblage gedrite+garnet+sillimanite+quartz that was used to estimate the P–T conditions of metamorphism. The rocks developed symplectites and corona textures by the breakdown of the primary paragenesis to orthopyroxene, cordierite and spinel. The successive parageneses formed in separate microdomains according to a clockwise P–T path. Geothermometry, geobarometry and phase diagram calculations indicate that the textures formed by decompression and cooling from 7–9 kbar and 850–900°C to 3.5–4.5 kbar and 700–800°C. This P–T evolution is consistent with low to medium a_H2O, between 0.4 and 0.7, and is similar to the metamorphic conditions deduced in Al–Mg granulites from the north of In Ouzzal.  相似文献   

Petrology and retrograde P-T path in granulites of the Kanskaya formation, Yenisey range, Eastern Siberia     

LEONID PERCHUK  TARAS GERYA  ALEX NOZHKIN 《Journal of Metamorphic Geology》1989,7(6):599-617

The Kanskaya formation in the Yenisey range, Eastern Siberia is a newly studied example of retrogression of granulite facies rocks. The formation consists of two stratigraphical units: the lower Kuzeevskaya group and the upper Atamanovskaya group. Rocks from both of these units show rare reaction textures such as replacement of cordierite by garnet, sillimanite and quartz, silimanite coronas around spinel and corundum, and garnet rims around plagioclase in metabasites, while plagioclase rims around garnet can be seen in associated metapelites. The paragenesis quartz + orthopyroxene + sillimanite is a feature of the Kuzeevskaya group. In many samples, chemical zoning of garnet and cordierite shows an increase in Mg from core to rim as well as the reverse.
Biotite-garnet-cordierite-sillimanite-quartz as well as spinel±biotite-garnet°Cordierite±sillimanite-quartz assemblages were studied using geothermometers and geobarometers based on both exchange and net-transfer reactions (Perchuk & Lavrent'eva, 1983; Aranovich & Podlesskii, 1983; Gerya & Perchuk, 1989). Detailed investigation of 10 samples including 1000 microprobe analyses revealed decompression (first stage) followed by the near isobaric cooling of the granulites. From geological studies, the 7 km total thickness of the sequence closely corresponds to the pressure difference (∼ 2.2kbar) measured by geobarometers in the samples taken from different levels in the sequence. Individual samples yield P-T paths ranging from 100°C/kbar to 140°C/kbar depending on their locations with respect to the large Tarakskiy granite pluton. In places the 100°C/kbar path changed to the 140°C/kbar due to the influence of the intrusion. In a P-T diagram these trajectories are subparallel lines, whose P-T maxima define the Archaean geotherm between 3.1 and 2.7 Ga, determined isotopically. A petrological model for P-T evolution of the Kanskaya formation is proposed.  相似文献   

用拉格朗日插值法求钻程坐标及其PC—1500程序     

陈昭明 《湖南地质》1989,8(3):71-74

传统方法绘制的钻程线投影图,往往成为较明显的折线。不符合本来是圆滑曲线的钻程线,且其误差也较大,而用拉格朗日插值法可以根据已得到的测斜结果,拟合出一条圆滑的钻程线。本文介绍了用这种方法编制的PC—1500机BASIC程序,使地质人员可用该机计算制图,摆脱繁锁的手工操作,提高工效和成图质量。  相似文献   

北秦岭官坡地区柯石英榴辉岩变质作用的P－T－t轨迹     

Zhao Donglin 《地球科学与环境学报》1997,(2)

根据矿物包裹和替代关系以及共生组合规律，北秦岭官坡地区柯石英榴辉岩的变质作用演化可划分为５个阶段，即前榴辉岩相的绿帘角闪岩相、榴辉岩相、后榴辉岩相的角闪岩相、绿帘角闪岩相和绿片岩相。Ｓｍ－Ｎｄ同位素定年显示，北秦岭柯石英榴辉岩于４００±１６Ｍａ沿朱夏断裂被推覆上升，Ｐ－Ｔ－ｔ轨迹的地球动力学成因可能与扬子和华北陆块间的俯冲－碰撞作用有关。  相似文献