On the circulation in the East Frisian Wadden Sea: numerical modeling and data analysis     

Emil V. Stanev  Jörg-Olaf Wolff  Hans Burchard  Karsten Bolding  Götz Flöser 《Ocean Dynamics》2003,53(1):27-51

 In this paper we use a combination of numerical modeling and data analysis to gain a better understanding of the major characteristics of the circulation in the East Frisian Wadden Sea. In particular, we concentrate on the asymmetry of the tidal wave and its modulation in the coastal area, which results in a complex pattern of responses to the sea-level forcing from the North Sea. The numerical simulations are based on the 3-D primitive equation General Estuarine Transport Model (GETM) with a horizontal resolution of 200 m and terrain-following vertical coordinates. The model is forced at its open boundaries with sea-level data from an operational model for the German Bight (German Hydrographic Office). The validation data for our model simulations include time series of tidal gauge data and surface currents measured at a pile in the back-barrier basin of the Island Langeoog, as well as several ADCP transects in the Accumer Ee tidal inlet. Circulation and turbulence characteristics are investigated for typical situations driven by spring and neap tides, and the analysis is focused on dominating temporal and spatial patterns. By investigating the response of five back-barrier basins with rather different morphologies to external forcing, an attempt is made to elucidate the dominating physical balances controlling the circulation in the individual sub-basins. It is demonstrated that the friction at the seabed tends to slow down the tidal signal in the shallow water. This leads to the establishment of flood dominance in the shallow sea north of the barrier islands. South of the islands, where the water volume of the channels at low tide is smaller than the tidal prism, the asymmetry of the tidal signal is shifted towards ebb dominance, a feature which is particularly pronounced at spring tide. At the northern open boundary, the tidal wave propagating from west to east generates a sea-level difference of ∼1 m along the boundary, and thereby triggers vigorous alongshore currents. The frictional control in the model is located in the inlets, as well as along the northern boundary. The correlation between velocity and turbulent kinetic energy tends to the establishment of a net southward transport, giving theoretical support to the observed accumulation of sediments on the intertidal flats. Weak turbulence along the northern shores of the barrier islands and the small magnitude of the residual currents there promote accumulation of suspended matter in these areas, although wave action will generally counteract this effect. Received: 29 May 2002 / Accepted: 26 September 2002 Responsible Editor: Jean-Marie Beckers Acknowledgements We are indebted to S. Dick for providing the data from the operational model of BSH and to B. Flemming for the useful discussions. The topography data and Fig. 1 have been prepared in cooperation with F. Meyer. Figure 2 has been prepared by G. Brink-Spalink. We also thank for the comments from an anonymous reviewer which helped to improve our paper.  相似文献   

东亚陆缘带构造扩张的深部热力学机制   总被引：6，自引：2，他引：6  

张健  石耀霖 《大地构造与成矿学》2003,27(3):222-227

近年来,我国地球科学家提出“陆缘构造扩张”观点,较好的解释了亚洲东部大陆边缘于新生代发生扩张离散运动的原因。本文基于“陆缘构造扩张”观点,探讨东亚陆缘带构造扩张的深部热力学机制。东亚陆缘带是具有强烈岩浆活动和构造变形的扩张带,此构造带的主要地球物理特征是频繁的地震活动和明显的地热异常。东亚陆缘扩张带地震层析成像显示,太平洋板块低角度俯冲到欧亚板块之下并平卧于670km相变界面之上。这种图像可能是俯冲后撤导致陆缘扩张的结果。热模拟及地球动力学计算表明:俯冲后撤时间距今约76Ma,海沟带后撤为陆缘壳体的生长留下空间,并形成东亚陆缘壳体增生扩展的前沿带,陆缘扩张量约700km。  相似文献   

GIS空间过程建模系统初探   总被引：4，自引：1，他引：4  

何勇  边馥苓  季英 《测绘信息与工程》2003,28(5):22-24

阐述了GIS空间过程和空间过程建模的概念，提出了空间过程建模系统的概念框架，分析了其功能需求和主要的支撑技术。  相似文献   

从激光扫描数据中进行建筑物特征提取研究   总被引：42，自引：4，他引：42  

李必军  方志祥  任娟 《武汉大学学报(信息科学版)》2003,28(1):65-70

提出了一套基于建筑物几何特征的信息挖掘方案，并具体介绍了研究中采用的一些原理、方法与实用算法，从而可以直接从激光扫描数据中提取建筑物的平面外轮廓信息。利用本方案对车载激光扫描系统获取的城市建筑物试验数据进行了具体的处理，并给出了三维建模和可视化表达结果。  相似文献   

面向对象的时空概念建模方法   总被引：4，自引：0，他引：4  

张山山 《武汉大学学报(信息科学版)》2003,28(2):191-196

在面向对象技术的基础上，把地理信息的时空特征与对象模型融合到一起，产生了语义丰富的时空扩展对象模型，以支持包含时空信息的系统需求分析和设计。  相似文献   

虚拟加工环境中的工件动态建模方法研究   总被引：5，自引：0，他引：5  

罗亚波  陈定方  肖田元 《武汉大学学报(信息科学版)》2003,28(2):238-241

提出并实现了基于平面纹理映射的基元立方体构造方法，以之为动态结点建立了动态八叉树结构，实现了支持变精度动态建模的自相似递归算法。该算法确保离正在加工的部位更近的区域有更高的精度，并采用C^ Builder和OpenGL构造了一个集成于虚拟加工环境的可加工工件模型。  相似文献   

Simulation of marine boundary layer characteristics using a 1-D PBL model over the Bay of Bengal during BOBMEX-99     

N. V. Sam  U. C. Mohanty  A. N. V. Satyanarayana 《Journal of Earth System Science》2003,112(2):185-204

The characteristic features of the marine boundary layer (MBL) over the Bay of Bengal during the southwest monsoon and the factors influencing it are investigated. The Bay of Bengal and Monsoon Experiment (BOBMEX) carried out during July–August 1999 is the first observational experiment under the Indian Climate Research Programme (ICRP). A very high-resolution data in the vertical was obtained during this experiment, which was used to study the MBL characteristics off the east coast of India in the north and south Bay of Bengal. Spells of active and suppressed convection over the Bay were observed, of which, three representative convective episodes were considered for the study. For this purpose a one-dimensional multi-level PBL model with a TKE-ε closure scheme was used. The soundings, viz., the vertical profiles of temperature, humidity, zonal and meridional component of wind, obtained onboard ORV Sagar Kanya and from coastal stations along the east coast are used for the study. The temporal evolution of turbulent kinetic energy, marine boundary layer height (MBLH), sensible and latent heat fluxes and drag coefficient of momentum are simulated for different epochs of monsoon and monsoon depressions during BOBMEX-99.The model also generates the vertical profiles of potential temperature, specific humidity, zonal and meridional wind. These simulated values compared reasonably well with the observations available from BOBMEX.  相似文献   

Architecture of fault zones determined from outcrop, cores, 3-D seismic tomography and geostatistical modeling: example from the Albalá Granitic Pluton, SW Iberian Variscan Massif     

J. Escuder Viruete  R. Carbonell  D. Martí  M. J. Jurado  A. Prez-Estaún 《Tectonophysics》2003,361(1-2):97-120

The 3-D seismic tomographic data are used together with field, core and well log structural information to determine the detailed 3-D architecture of fault zones in a granitic massif of volume 500×575×168 m at Mina Ratones area in the Albalá Granitic Pluton. To facilitate the integration of the different data, geostatistical simulation algorithms are applied to interpolate the relatively sparse structural (hard) control data conditioned to abundant but indirect 3-D (soft) seismic tomographic data. To effectively integrate geologic and tomographic data, 3-D migration of the velocity model from the time domain into the depth domain was essential. The resulting 3-D model constitutes an image of the fault zone architecture within the granitic massif that honours hard and soft data and provides an evaluation of the spatial variability of structural heterogeneities based on the computation of 3-D experimental variograms of Fracture Index (fault intensity) data. This probabilistic quantitative 3-D model of spatially heterogeneous fault zones is suitable for subsequent fluid flow simulations. The modeled image of the 3-D fault distribution is consistent with the fault architecture in the Mina Ratones area, which basically consists of two families of subvertical structures with NNE–SSW and ENE–WSW trends that displaces the surfaces of low-angle faults (North Fault) and follows their seismically detected staircase geometry. These brittle structures cut two subvertical dykes (27 and 27′ Dykes) with a NNE–SSW to N–S trend. The faults present high FI (FI>12) adjacent bands of irregular geometry in detail that intersect in space delimiting rhombohedral blocks of relatively less fractured granite (FI<6). Both structural domains likely correspond with the protolith and the damaged zone/fault core in the widely accepted model for fault zone architecture. Therefore, the construction of 3-D grids of the FI in granitic areas affected by brittle tectonics permits the quantitative structural characterization of the rock massif.  相似文献   

新疆西达里亚T-II油藏储层三维建模研究     

邱立伟  李红雯  康志江 《新疆地质》2003,(2)

在新疆西达里亚T-Ⅱ油气藏的储层表征研究中,首先进行了地质及测井解释,在此基础上应用地质统计学方法进行了三维储层地质建模,建模过程中采用先建立砂层格架,再建立属性参数的“两步建模”研究思路,理论上减少了砂体与属性参数的解释矛盾与误差,提高了属性模型精确度.通过实际生产动态对属性模型进行检验,证明建模结果是正确的.  相似文献   

Fractal and Multifractal Modeling of Hydrothermal Mineral Deposit Spectrum： Application to Gold Deposits in Abitibi Area, Ontario, Canada   总被引：2，自引：0，他引：2  

ChengQiuming 《中国地质大学学报(英文版)》2003,14(3):199-206

A number of fractal/multifractal methods are introduced for quantifying the mineral de-lmsit spectrum which include a number-size, grade-tonnage model, power spectrmn model,multi-fractal model and an eigeavalue spectrmn model The first two models characterize mineral deposits spec-tra based on relationships among the measures of mineral deposits.These include the number of deposits,size of deposits,concentration and volume of mineral deposits.The last three methods that deal with the spatial-temporal spectra of mineral deposit studies are all expected to be popularized in near future.A case study of hydrothermal gold deposits from the Abitibi area,a world-class mineral district is used to demonstrate the principle as well as the applications of methods proposed in this paper,It has been shown that fractal and multifractal models are generally applicable to modeling of mineral deposits and occurrences.Clusters of mineral deposits were identified by several methods including the power spectral eral deposits in the Timmins and Kirkland Lake camps.  相似文献