Kinetics of redox cycling of iron coupled with fulvic acid     

Yiwei Deng  Werner Stumm 《Aquatic Sciences - Research Across Boundaries》1993,55(2):103-111

The kinetics of conversion of iron(III) (hydr)oxides to ferrous iron mediated by fulvic acid have been investigated in order to improve the understanding of the redox cycling of iron at the oxic-anoxic boundary in natural waters. Under the conditions similar to natural waters, fulvic acid is able to reduce the iron(III) (hydr)oxide. The kinetics of the reaction depend on the reactivity of iron(III) (hydr)oxides and the reducing power of the fulvic acid. The rate of reaction is 60 nm/h obtained under following conditions: total concentration of Fe(III) 1.0 × 10^–4 M, pH 7.5, fulvic acid 5 mg/L. The rate is considered as a net result of reduction and oxidation in the > Fe^III-OH/Fe(II) wheel coupled with fulvic acid. In a real natural water system, reductants other than fulvic acid may be of importance. The results obtained in the laboratory, however, provide evidence that the Fe(OH)₃(s)/Fe(II) redox couple is able to act as an electron-transfer mediator for the oxidation of natural organic substances, such as fulvic acid by molecular oxygen either in the absence of microorganisms or as a supplement to microbial activity.  相似文献   

Brønsted reactions on oxide mineral surfaces and the temperature-dependence of their dissolution rates     

William H. Casey  Marcus A. Cheney 《Aquatic Sciences - Research Across Boundaries》1993,55(4):304-313

The pH-dependence of oxide dissolution rates is controlled by Brønsted acid-base reactions at the mineral surface. These reactions are rapid but depend explicitly on temperature, as do the subsequent slow rates of bond hydrolysis. The net result is that dissolution rates vary in a complicated fashion with temperature and solution pH. The enthalpy changes of acid-base reactions on oxide materials are sufficiently similar, however, that general statements can be made about their contribution. The enthalpy changes from proton adsorption to a hydroxyl functional group (SOH), or to a deprotonated functional group (SO ^–), are generally exothermic. The enthalpy changes become increasingly endothermic, however, as charge accumulates on the mineral surface and the charged species interact electrostatically. The result is that mineral dissolution rates are least sensitive to temperature, as measured with an Arrhenius-like rate law, at pH conditions near the Point of Zero Net Proton Charge.  相似文献   

A continuous and mechanistic representation of calcite reaction-controlled kinetics in dilute solutions at 25°C and 1 atm total pressure     

Takeshi Arakaki  Alfonso Mucci 《Aquatic Geochemistry》1995,1(1):105-130

  相似文献   

Acid leaching of ash and coal: Time dependence and trace element occurrences     

Mehtap Paul  Meryem Seferinoğlu  Gul Asiye Ayçık  Åke Sandström  Michael L. Smith  Jan Paul 《International Journal of Mineral Processing》2006

The leaching of coal and coal/asphaltite/wood-ashes in sulfuric acid (pH 1.0, 25 °C, S/L, 1:10) was studied as a function of time; acid consumption and extracted metal concentrations are presented. Whole coals consumed acid rapidly during the first few minutes, followed by slow acid consumption. Wood-, lignite-, and asphaltite-ashes consumed acid in two stages, the rapid phase extending < 30 min and the slow phase extended up to 10 days. The rapid phase was dominated by the dissolution of Ca, K and Mg ions for wood-ash, by Ca, Al and Mg ions for lignite-ash and Ca and Mg ions for asphaltite-ash. The sulfur concentration in solution and the concentrations of Ca, Fe, K, Mg, Na, P, Al and Mn in the aqueous phase verified the neutralizing capacity of the untreated ashes as well as the formation of insoluble sulfates in the residues. The slow phase kinetics differed for different fuels and exhibited leaching of several abundant elements—Fe, Al, K, Na and Mn. Trace elements (Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Th, U, V, Zn) sometimes required up to 32 h for maximal extraction from ashes. Suggestions are presented regarding the chemical nature of trace elements in the untreated coals and ashes and suitable residence times for economical industrial processes. We think it possible to combine bacteriological oxidation of sulfidic concentrates of acid leaching from ash of various qualities or even whole coals.  相似文献   

光催化降解乐果的动力学研究     

梁喜珍  黄国林  周跃明  李香枝 《华东地质学院学报》2006,29(1):80-83

采用30 W石英紫外灯作为光源,研究了乐果在二氧化钛悬浮体系中光催化降解反应的动力学规律。考察了乐果起始浓度、TiO2用量、溶液pH值及温度对乐果光催化降解速率的影响,结果表明,乐果光催化降解符合表观零级动力学规律。由于速率常数k与乐果起始浓度有关,表明乐果光催化降解反应不是一个简单的零级反应。  相似文献   

25～75℃酸性NaCl溶液中方铅矿的溶解动力学   总被引：4，自引：0，他引：4  

张生  李建平  王玉荣  胡光黔 《地球化学》2002,31(6):587-592

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。  相似文献   

铅在高岭石表面的解吸动力学   总被引：3，自引：0，他引：3  

魏俊峰  吴大清  彭金莲  刁桂仪 《矿物岩石》2002,22(2):5-8

经过酸性条件下（pH=3.1)Pb(Ⅱ）高岭石表面解吸动力学的研究，发现解吸反应与吸附反应动力学相似，也是一个二阶段的过程，即初始的快速解吸之后伴随着一个缓慢的释放过程。在快速解吸阶段，7min内解吸量即已达到41％。吸附铅没有完全解吸，有近38％残留在高岭石表面，即解吸和吸附过程不是完全可逆的。解吸过程可以用扩展Elovich方程、Elovich方程、双常数方程和一级扩散方程较好地似合。  相似文献   

MODELING THE FATE AND TRANSPORT OF HYDROPHOBIC ORGANIC COMPOUNDS IN AN UNSTEADY RIVER-ESTUARINE SYSTEM     

Su-Chin CHEN  Jan-Tai KUO 《国际泥沙研究》2002,17(3)

1 INTRODUCTION Extensive literature (Brown et al., 1985; Sawhney et al., 1981; Bierman and Swain, 1982; Connolly, 1980; Lopez-Avila and Hites, 1980; O扖onnor, 1988) described lots of sorbed pollutants or toxic substances in bed sediments of rivers, even after the effluent was halted for a long time. This is particularly true for hydrophobic organic compounds that can be sorbed on the particles and accumulated in the river bed sediments (Karickhoff et al., 1979). Pollution events of…  相似文献   

In situ methods for studying adsorbed phases at the solid/liquid interface: microcalorimetry and ellipsometryLes méthodes d'étude in situ des phases adsorbées : microcalorimétrie et ellipsométrie     

Renaud Denoyel 《Comptes Rendus Geoscience》2002,334(9):689-702

The applications of calorimetric and ellipsometric methods to the understanding of adsorption phenomena occurring at the solid–liquid interface are presented with examples in the field of surfactant adsorption. The various experimental approaches are presented and compared, i.e., immersion calorimetry, titration calorimetry and liquid flow calorimetry. It is shown how they can be used to follow, in situ, the building steps of the surfactant adsorbed layer. On the other hand, ellipsometry allows the adsorption isotherm, the adsorption kinetics as well as the thickness of the adsorbed layer to be determined on well-defined flat surfaces. To cite this article: R. Denoyel, C. R. Geoscience 334 (2002) 689–702.  相似文献   

湍流混合动力学机理研究   总被引：7，自引：0，他引：7       下载免费PDF全文

武道吉  张永吉  李圭白  谭风训 《水科学进展》2003,14(6):706-709

在分析传统混合动力学机理基础上,通过宏观混合与微观混合时间量级的对比,提出了湍流条件下,涡流扩散主导宏观混合,分子扩散主导微观混合,而混合过程由宏观混合主导,欧拉数Eu可作为混合效果的控制指标,并通过3种不同容积反应器的混合搅拌试验,进一步证实了该指标的实用性。  相似文献