乌兰哈达变质岩地层地热勘探井钻头选择与取心工艺          下载免费PDF全文

宋国龙  董劲松  李进安 《探矿工程》2016,43(12):41-44

内蒙古自治区察右后旗乌兰哈达苏木地热勘探井井深2006.87 m。采用石油30型钻机施工,钻遇地层大部分为变质岩,达1500 m以上,对牙轮钻头损坏严重,同时施工要求进行18次岩心采取。经过对钻头的试用、选择,最后选用HJ637G型牙轮钻头,钻进时效可达0.8～1.2 m,使用寿命可达到80～100 h。取心段采用川7-4型双管单动取心筒配合金刚石钻头,岩心采取率可达70%～95%。  相似文献   

大直径加重管绳索取心技术在页岩气勘探中的应用研究          下载免费PDF全文

朱恒银  王强  张正  蔡正水 《探矿工程》2016,43(10):160-164

根据页岩气、煤层气勘探对钻探技术的特殊要求,进行了大直径绳索取心技术的探索研究。文中重点介绍了加重管组合式绳索取心钻具的结构、作用原理及特点,以及施工试验效果。通过施工实践的启示,对大直径绳索取心技术的发展提出了几点认识。  相似文献   

Unsupervised regionalization of the United States into landscape pattern types     

J. Niesterowicz  J. Jasiewicz 《International journal of geographical information science》2016,30(7):1450-1468

We present a pattern-based regionalization of the conterminous US – a partitioning of the country into a number of mutually exclusive and exhaustive regions that maximizes the intra-region stationarity of land cover patterns and inter-region disparity between those patterns. The result is a discretization of the land surface into a number of landscape pattern types (LPTs) – spatial units each containing a unique quasi-stationary pattern of land cover classes. To achieve this goal, we use a recently developed method which utilizes machine vision techniques. First, the entire National Land Cover Dataset (NLCD) is partitioned into a grid of square-size blocks of cells, called motifels. The size of a motifel defines the spatial scale of a local landscape. The land cover classes of cells within a motifel form a local landscape pattern which is mathematically represented by a histogram of co-occurrence features. Using the Jensen–Shannon divergence as a dissimilarity function between patterns we group the motifels into several LPTs. The grouping procedure consists of two phases. First, the grid of motifels is partitioned spatially using a region-growing segmentation algorithm. Then, the resulting segments of this grid, each represented by its medoid, are clustered using a hierarchical algorithm with Ward’s linkage. The broad-extent maps of progressively more generalized LPTs resulting from this procedure are shown and discussed. Our delineated LPTs agree well with the perceptual patterns seen in the NLCD map.  相似文献   

The effect of specimen diameter size on uniaxial compressive strength,P-wave velocity and the correlation between them     

Amin Jamshidi  Mashalah Khamehchiyan  Reza Zarei Sahamieh 《Geomechanics and Geoengineering》2016,11(1):13-19

Estimation of uniaxial compressive strength (UCS) by P-wave velocity (V_P) is of great interest to geotechnical engineers in various design projects. The specimen diameter size is one of the main factors that influence rock parameters such as UCS and V_P. In this study, the diameter size of specimens that effect UCS and V_P is investigated. Moreover, the correlation between UCS and V_P are examined via empirical analysis. For this purpose, 15 travertine samples were collected and core specimens with a diameters size of 38, 44, 54, 64 and 74 mm were prepared. Then, uniaxial compressive strength and P-wave velocity tests were conducted according to the procedure suggested by ISRM (1981). It is concluded that the diameter size of the specimen has a significant effect on UCS and V_P. Moreover, it was found that the best correlation between relevant parameters obtained for the specimen diameter of 38 mm.  相似文献   

应用两次展开法求解系泊柱体慢漂运动方程     

金瑞佳  滕斌  吕林 《海洋工程》2016,34(5):11-19

在深海中系泊的海洋平台,如Spar平台,水下部分为带有系泊的圆柱结构,其水平方向运动响应往往具有较低的自振频率,容易在低频波浪力(源于非线性的差频效应)作用下发生共振响应,使结构发生大幅水平慢漂。当浮体的瞬时位置大幅偏离初始位置时,基于初始平衡位置的摄动展开法会存在较大误差。针对这一问题,采用两次展开方法,对大幅慢漂运动开展时域模拟研究。对双色波作用下自由漂浮圆柱的大幅运动响应问题进行数值分析,并与采用基于初始平衡位置的摄动展开法的计算结果进行了对比。结果表明,采用新的两次展开法可以计算出波浪遭遇频率的变化和波浪漂移阻尼,而这无法从基于初始平衡位置的常规摄动展开法中得到,体现了两次展开法在分析大幅慢漂问题上的优势。  相似文献   

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

“松科二井”用硬岩长寿命钻头的设计与应用     

李春  沈立娜 《探矿工程》2018,45(2):56-60

为提高“松科二井”在深井硬岩钻进中的寿命与效率,选用了高性能胎体材料、高强度焊接材料,并采用了合理的钻头结构与水路结构设计,研制的φ216/124 mm金刚石取心钻头在“松科二井”取得了良好的效果,本文介绍了适用于深井硬岩的金刚石钻头的设计及应用效果。  相似文献   

基于稳态碎岩方式的PDC钻头设计分析研究     

汤凤林  沈中华  段隆臣  彭莉  柳少青  Чихоткин В.Ф. 《探矿工程》2018,45(1):73-78

自从20世纪80年代PDC复合片研发成功以来,PDC钻头由于其钻进性能强和耐磨性能好,在世界许多国家的石油钻井和地质勘探中得到了广泛应用,取得了很好的效果。但是,如何进一步提高其在钻探工程中的技术经济指标是一个很迫切的问题。俄罗斯博士Скоромных В. В.教授等对此进行多年研究,提出了稳态破碎岩石方式的思想,即在轴载和扭矩切力形成的合力R与切削面成垂直角度条件下,切入深度h不变时形成的一种碎岩方式。并在此基础上提出了一些设计PDC钻头方面的建议。  相似文献   

Paleoearthquakes in the Uimon basin (Gorny Altai)     

E.V. Deev  I.D. Zol’nikov  I.V. Turova  G.G. Rusanov  Yu.M. Ryapolova  N.N. Nevedrova  S.A. Kotler 《Russian Geology and Geophysics》2018,59(4):351-362

Paleoseismological studies confirm that the Uimon basin is thrust by its northern mountain border along the active South Terekta fault. The latest motion along the fault in the 7-8th centuries AD induced an earthquake with a magnitude of M_w= 7.4-7.7 and a shaking intensity of I = 9-11 on the MSK-64 scale. The same fault generated another event (M > 7, I = 9-10), possibly, about 16 kyr ago, which triggered gravity sliding. The rockslide dammed the Uimon valley and produced a lake, where lacustrine deposition began about 14 ± 1 kyr ago, and a later M > 7 (I = 9-10) earthquake at ~ 6 ka caused the dam collapse and the lake drainage. Traces of much older earthquakes that occurred within the Uimon basin are detectable from secondary deformation structures (seismites) in soft sediments deposited during the drainage of a Late Pleistocene ice-dammed lake between 100 and 90 ka and in ~ 77 ka alluvium. The magnitude and intensity of these paleoearthquakes were at least M > 5.0-5.5 and I > 6-7.  相似文献   

Main technical innovations of Songke Well No.2 Drilling Project     

《China Geology》2018,1(2):187-201

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.  相似文献