滇、川、黔成矿区的铅锌矿源层（岩）   总被引：23，自引：3，他引：23  

柳贺昌 《地质与勘探》1996,32(2):12-18

滇、川、黔铅锌成矿区的矿源层（岩）及其成矿作用，具多矿源层（岩）、多容矿层和多遮挡层共存的特点。矿源层（岩）改造成矿分海西晚期改造生成贫铅锌矿床和燕山期改造生成铅锌富矿床两个旋回，改造成矿的３个主因是：多条继承、发展了基底构造的深一道断层系统，峨眉山玄武岩浆上涌产生的高热能、喷气、矿质和广泛、多中心循环的热卤水，铅锌矿床为沉积─改造─后成成矿。  相似文献   

中国北部边疆第四系地下水研究     

李国安  韩朝平 《第四纪研究》1996,16(2):105-114

在中国北部边疆西起天山东端的北山，东至大兴安岭北段的４２００ｋｍ地域内，气候干旱少雨，水资源贫乏，第四系地下水是主要供水源之一。本文首次比较系统地研究了该区第四纪堆积物的分布和地下水的赋存规律。文中依据不同地貌单元、地层岩性及气候条件诸因素将本区第四系地下水划分为枝状沟谷砂砾石层孔隙水、河谷冲积平原砂砾石层孔隙水两种主要类型，并着重对有重要供水意义的河谷冲积平原砂砾石层孔隙水的分布、埋藏条件、富水性及水化学特征进行了论述。  相似文献   

赣东北地区前震旦系地层金的原生富集趋势探讨   总被引：3，自引：0，他引：3  

奚舣  周新民 《江西地质》1997,11(1):46-51

在分析变质岩的含金性及地球化学性质的基础上，认为与金成矿有关的主要元素均源自前震旦系。指出了金的原生富集趋势和存在的矿源层。为在该区寻找金矿指出了方向  相似文献   

江苏煤层气资源分析     

傅学海  马筱英 《江苏地质》1997,21(2):120-123

简要地归纳了江苏省煤层气的成矿地质环境，分析了成煤区地质构造特征、煤层及围岩储层的物性特征，在此基础上，对主要地区煤层气资源进行了估算。  相似文献   

红旗营子群研究——冀北铅锌银矿床的矿源层   总被引：2，自引：0，他引：2  

任耀武 《华北地质矿产杂志》1997,12(1):44-51

红旗营子群主要分布于康保－赤峰深断裂以南，尚义－平泉深断裂以北，大致相当于内蒙地轴范围内，冀北主要铅锌银矿床均分布于该地层中，本文主要论述了作为矿源导的红旗营子群岩石学、地球化学及成矿地质特征，据此提出了“三位一体”找矿标志。  相似文献   

Sedimentary environment and development controls of the hydrocarbon source beds:Middle and Upper Proterozoic in northern North China     

BAO Zhidong  CHEN Jianfa  ZHANG Shuichang  Zhao Hongwen  Zhang qinghai  LI Yan 《中国科学D辑(英文版)》2004,47(Z2)

Problem on development control of marine source bed hold in Chinese petroleum industry progression. The Hongshuizhuang Formation,Tieling Formation and Xiamaling Formation in the Middle and Upper Proterozoic are important hydrocarbon source beds in northern North China, and investigation of their sedimentary environments and the controls has great significance for petroleum exploration in North China. Based on sedimentology (sequence stratigraphy), palaeoecology, sedimentary geochemistry, and sedimentary palaeogeography, their development pattern is discussed. All these studies indicate that the development controls of the hydrocarbon source beds include a favorite palaeogeographic location, exceeding propagation of biomes in low and middle latitudes, anoxic environments, enrichment of phosphorus element and the adsorption of clay minerals during the preservation of organic matter in the marine carbonates.  相似文献   

Metamorphism and metamorphic K–Ar ages of the Mesozoic accretionary complex in Northland, New Zealand     

Yujiro  Nishimura  Philippa M.  Black  Tetsumaru  Itaya 《Island Arc》2004,13(3):416-431

Abstract A southwest dipping Mesozoic accretionary complex, which consists of tectonically imbricated turbiditic mudstone and sandstone, hemipelagic siliceous mudstone, and bedded cherts and basaltic rocks of pelagic origin, is exposed in northern North Island, New Zealand. Interpillow limestone is sometimes contained in the basaltic rocks. The grade of subduction‐related metamorphism increases from northeast to southwest, indicating an inverted metamorphic gradient dip. Three metamorphic facies are recognized largely on the basis of mineral parageneses in sedimentary and basaltic rocks: zeolite, prehnite‐pumpellyite and pumpellyite‐actinolite. From the apparent interplanar spacing d₀₀₂ data for carbonaceous material, which range from 3.642 to 3.564 Å, the highest grade of metamorphism is considered to have attained only the lowermost grade of the pumpellyite‐actinolite facies for which the highest temperature may be approximately 300°C. Metamorphic white mica K–Ar ages are reported for magnetic separates and <2 µm hydraulic elutriation separates from 27 pelitic and semipelitic samples. The age data obtained from elutriation separates are approximately 8 m.y. younger, on average, than those from magnetic separates. The age difference is attributed to the possible admixture of nonequilibrated detrital white mica in the magnetic separates, and the age of the elutriation separates is considered to be the age of metamorphism. If the concept, based on fossil evidence, of the subdivision of the Northland accretionary complex into north and south units is accepted, then the peak age of metamorphism in the north unit is likely to be 180–130 Ma; that is, earliest Middle Jurassic to early Early Cretaceous, whereas that in the south unit is 150–130 Ma; that is, late Late Jurassic to early Early Cretaceous. The age cluster for the north unit correlates with that of the Chrystalls Beach–Taieri Mouth section (uncertain terrane), while the age cluster for the south unit is older than that of the Younger Torlesse Subterrane in the Wellington area, and may be comparable with that of the Nelson and Marlborough areas (Caples and Waipapa terranes).  相似文献   

Heat influx and exhumation of the Shimanto accretionary complex: Miocene fission track ages from the Kii Peninsula, southwest Japan     

Noriko  Hasebe  Hiroaki  Watanabe 《Island Arc》2004,13(4):533-543

Abstract   To determine how local geological events contributed to the evolution of accretionary complexes and eventual exposure of rocks with different structural levels, geochronological mapping was carried out using fission track (FT) analysis at the Kii Peninsula, southwest Japan. At this site, the original zonal structure of Cretaceous accretionary complexes parallel to the subduction zone is disturbed by the northward projection of the Shimanto accretionary complex. Twenty-six zircon FT ages were obtained from an area of ∼12 km in an east–west direction and ∼15 km in a north–south direction, and classified into three groups: (i) ages ∼15 Ma (range ∼10–20 Ma), which are distributed along the northwest–southeast valley; (ii) ages of ∼50 Ma in the northwest of the study area; and (iii) ages older than those in Groups 1 and 2. Based on results from eight zircon FT length distributions, the Miocene ages appear to be the result of spatial variations in heat influx and cooling after the regional exhumation of the area, as recorded by FT ages of ∼50 Ma.  相似文献   

A hybrid method for size characterization of coarse subsurface fluvial sediments     

Stephen P. Rice  Judith K. Haschenburger 《地球表面变化过程与地形》2004,29(3):373-389

This paper introduces and evaluates a novel method for ascertaining the grain‐size distribution of subsurface sediments that involves profoundly less sampling effort than standard methods. It is based on hybrid sampling principles previously applied to the construction of synthetic surface grain‐size distributions. The method is developed from an empirical demonstration of the approximate similarity of surface and subsurface grain‐size distributions when compared over a common range of sizes. Subsurface hybrid models are found to provide good facsimiles of grain‐size distributions de?ned using standard criteria and to yield distribution percentiles with millimetre accuracy. The technique is presented as an expedient alternative to standard methods for large, perennial gravel‐bed rivers. As this is a new technique, prudent application is advised in lieu of further investigation. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination     

Jiongxin Xu 《地球表面变化过程与地形》2004,29(5):645-657

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献