铀矿层真实厚度的确定和最佳测井点距          下载免费PDF全文

秦积庚  谭庆江 《地球物理学报》1990,33(4):468-479

本文讨论了最佳测井点距的选择原理,其最佳值大致为8-12.5cm.并从原理上分析了矿层解释厚度增大的主要原因:根据离散测量值所作的分层解释结果必然导致矿层解释厚度的增大.大量的模型测量结果完全证实了理论分析的正确性,并且还提出了合适的解决办法.  相似文献   

Magnetic interpretation of pairs of sheets and their equivalence to dykes     

S. K. G. Krishnamacharyulu  Bh. V. V. Gopalarao  I. V. Radhakrishna Murthy 《Pure and Applied Geophysics》1990,132(4):719-731

Magnetic anomaly profiles over two thin sheets separated by a small distance resemble those of dykes andvice versa. Interpretation of anomalies over a pair of sheets based on the magnetic properties of dykes predicts a dyke whose centre lies midway between the positions of the sheets. The dyke, on the other hand, is magnetically equivalent to a pair of sheets, both lying at the same depth and having the same magnetization.The magnetic anomalies due to a pair of sheets can be interpreted by framing linear equations between the anomalies and their distances measured from an arbitrary reference. Application of this method to anomalies of dipping sheets with a finite depth extent is indicated.  相似文献   

浅层折射波法优化系统在将军崖地质病害调查中的应用     

周鸿秋  顾汉明 《地球科学》1991,16(4):445-452

  相似文献   

用地震反射波定量解释煤层厚度的方法   总被引：6，自引：0，他引：6  

程曾庆  吴奕峰 《地球物理学报》1991,34(5):657-662

一、引言 工业可采煤层厚度一般为1.5m,如何从地震资料上准确圈定1m厚的煤层边界、并定量解释煤层厚度、准确计算地质储量,国外一些学者研究了薄层地震反射波的动力学特征与薄层厚度的关系后,得出了不同的薄层垂直分辨率标准,Widess用零相位子波作实验时,发现当薄层厚度为λ/8(λ是地震子波的主波长)时,反射波形正好是入射波的导数,并可直观地鉴别顶底反射;Kallweit利用可控震源研究了薄层响应的频谱后,提出了分辨地震波的极限为1/(1.4f)(f为地震子波的上限频率),经主频换算后,此  相似文献   

航空像片在活断层研究中的应用   总被引：2，自引：1，他引：2       下载免费PDF全文

江娃利 《地震地质》1991,13(4):323-331

航片判读活断层的依据是断层地形学。航片判读活断层的关键是找出变位地形。变位地形是指由构造作用形成,非自然侵蚀作用所能形成的地形。航片判读变位地形的可信度分为三类。垂河向陡坎、背河向陡坎及反坡向陡坎被认为是可信度工的第四纪活动的变位地形。判读走滑断层的变位方向及变位量,需注意地貌面上的线性地物。利用不同变位基准的不同变位量可判读断层活动期次。本文通过中日航片判读活断层的14个实例,对变位地形的识别予以说明  相似文献   

秦豫地区高精度航磁资料研究成果   总被引：1，自引：0，他引：1  

袁照令  李大明 《地球科学》1991,16(4):437-444

  相似文献   

四川富顺─南溪地区地貌特征与经济开发的1∶10万TM图像判读     

许仲路 《遥感学报》1994,(2)

本文利用不同地物在同一波段或相同地物在不同波段具有不同色调的变化规律，来目视判读７幅ｌ∶ｌ０万的ＴＭ黑白和彩色合成图像。通过细致地分析、对比，在富顺─南溪地区判读不同泥沙含量、不同深浅的水体，了解河床中深槽、浅滩地貌，准确勾绘所有大于像元的水体涯线，确定沟谷的宽度和相对深度，查明沟谷成因，划分漫滩和河谷阶地，圈定丘陵和山地的，分布，研究它们的形态和成因，为区域开发奠定科学的基础。  相似文献   

SP anomaly over doable line of poles-interpretation through log curves     

B. V. S. Murty  P. Haricharan 《Journal of Earth System Science》1984,93(4):437-445

In the analysis and interpretation ofsp anomalies, two-dimensional finite sheet models are equated to the double line of poles. The profiles over such a model being asymmetric with a minor positive peak and a major negative peak, a double logarithmic curve matching technique simpler than that of Meiser is suggested in the paper for easy and unique solution for all values of depth, dip and length. This technique along with a few others have been tested on two profiles across the sulphide deposit from the Rakha Mines, Singhbhum copper belt, India.  相似文献   

天山地区遥感解译及铀矿化地质特征     

崔振奎  罗富生  陈跃周 《铀矿地质》1986,(4)

本文通过卫星照片解译对天山地区的地层进行了划分,尤其是通过线性构造的解译把天山地区分成了若干个不同性质的地块,并对构造规模进行了分级。此外,还讨论了新老构造的继承关系,构造与岩体之间的相互依存关系等。本文又通过环形体的解译进一步确定了火山岩的喷发期次、活动规模及其与铀矿化的关系。通过对花岗岩体侵入期次和相带的划分,进而在解译中配合四道能谱测量判读标志来分析不同影象地质体的可能含铀丰度。另外还探讨了褶皱构造各要素的半定最估算的可能性。  相似文献   

Fault interaction and seismicity: Laboratory investigation and its seismotectonic interpretation   总被引：2，自引：0，他引：2  

A. piák  T. Lokajíek 《Pure and Applied Geophysics》1986,124(4-5):857-874

Systems of two parallel linear faults of the same length with the angle of inclination =45° were investigated under uniaxial linearly increasing load. Perspex plates were used as models. For each treated fault configuration the morphology of tensile cracks and the sequence of seismoacoustic events of shear and tensile origin were studied.It is shown that the seismic regime of a fault system is strongly influenced by the contact conditions on a fault plane; it is different in the faults with the aseismic contact, represented by open slits, and in the faults with the seismoactive contact, represented by filled slits, respectively.The experiments proved the dominating role of a fast shear displacement of the stick-slip type in the regime of seismic energy release of a fault system. The tensile crack generation seems to be only of little—if not negligible—importance. On the other hand, the existence of tensile cracks in a fault system can play an important role in the course of subsequent loading cycles because the stick-slip displacements can take place not only along the primary faults but also along the planes of tensile cracks.A comparison of some results of model experiments and the already published results of geological and seismological investigations indicated that the way of seismic energy relase on faults in nature and in the laboratory could be of the same character. Several analogies between the seismic regime of a fault model and of real seismic regions were found concerning the morphology of faults, off-fault fore- and aftershocks, and earthquake doublets, respectively.  相似文献