20世纪90年代以来中外区域规划研究的对比分析   总被引：1，自引：0，他引：1  

殷为华 《世界地理研究》2006,15(4):30-34,47

区域规划是国家政府进行区域管理的重要手段和方式之一。为了落实科学发展观和对区域发展有效宏观调控,区域规划成为国家“十一五”规划的重要内容。本文对比分析了1990年代以来国外区域规划研究的主要进展、以及我国区域规划研究的特点与不足,以期为推动我国当前新一轮区域规划的理论研究和实践创新提供有益启示。  相似文献   

The simultaneous use of piles and prestressed anchors in foundation design     

F.A.B. Danziger  B.R. Danziger  M.P. Pacheco   《Engineering Geology》2006,87(3-4):163-177

The paper presents a simplified design procedure to evaluate the loads in piles and prestressed anchors when simultaneously used in foundations under tension loads and high overturning moments. Although involving some necessary simplifications for the sake of design, the procedure keeps the main features of load transfer from piles and anchors to the surrounding soil. The approximate method has been adopted by the authors in relevant projects in Brazil, whose long term satisfactory performance indicates its appropriate performance. Two practical examples have been selected to illustrate the application of the proposed method. It is shown that anchor prestressing plays an important role in limiting tension loads on the piles and controlling foundation eccentricity. The importance of monitoring for replacement of occasional prestress losses to prevent long-term pile overstressing is illustrated.  相似文献   

Modeling of Beams on Reinforced Granular Beds     

Priti Maheshwari  P. K. Basudhar  S. Chandra 《Geotechnical and Geological Engineering》2006,24(2):313-324

The paper describes a mechanical model for estimating the flexural response of a strip footing, supporting a column (imposing a concentrated load), resting on a compacted granular bed overlying a reinforcement layer for example, geogrids, geomats etc. below which lies a loose soil deposit. The footing is idealized as a beam and the reinforcing element is assumed to have finite bending stiffness and negligible frictional resistance. The upper and lower soil layers are idealized by a series of linear and discrete springs (Winkler springs) of different stiffness values. To find the response of such a model the governing differential equations have been derived and expressed in a nondimensional form. A closed form analytical solution of the same has been obtained subjected to appropriate boundary conditions. Using the present approach the resulting solution for a degenerated case of a long beam is found to be identical to the same of Hetenyi (1946, Beams on elastic foundations, University of Michigan press, Ann Arbor, MI). Parametric studies reveal that the ratio of flexural rigidity of upper and lower beam and the ratio of stiffness of the upper and lower soil layers affect significantly the response of the foundation.  相似文献   

Construction Problems on the Karstified Limestone Tuffs of Condeixa, Central Portugal: A Case Study     

M. Quinta Ferreira  J. L. Velho 《Geotechnical and Geological Engineering》2006,24(1):101-116

During the excavations for the foundations of a three storey building on the limestone tuffs of Condeixa, Central Portugal, a large dissolution fissure and smaller dissolution voids were found. Since the area has never been the subject of engineering geology investigation, it was decided to evaluate the risk associated with the construction of the building. These limestone tuffs were formed in a continental environment by the precipitation of calcite carried by the water coming from the large limestone body in the east. The precipitated calcite mixed with the terrigenous materials and around trunks and leaves of plants, originating a very heterogeneous and porous ground, which is characteristic of limestone tuffs. The study started with a detailed geological survey followed by a large number of destructive drillings, located essentially under the pad foundations. The results revealed several karstic cavities with serious problems for the building foundations and the structure, and many smaller dissolution cavities, often filled with clayey soils. The ground treatment solutions used included, dental cleaning, filling with concrete or granular material the dissolution structures accessible at the level of the foundation, reinforcement of the footing and the structure of the building and adding a continuous foundation beam to hold the foundations together. The cost of the engineering geology study, site investigation, ground treatment, and the reinforcement of the foundation and building, increased the total construction cost from 2%, at the design stage, to 4.8%.  相似文献   

大吨位基桩抗压载荷试验中的锚桩预应力保护技术     

陈雅琴  张宏光  冯忠居  谢永利 《工程地质学报》2006,14(4):531-536

竖轴向承载力是桩基础设计的重要参数,现场静载试验是目前确定桩基承载力的主要手段之一。本文依托黄陵延安段高速公路洛河特大桥试桩工程,通过对原有工程桩施加预应力,形成了以工程桩为锚桩的锚拔体系。加载过程中试桩应力、锚桩应力及桩顶位移测试,结果表明,结合预应力技术,以工程桩作为锚桩构成桩基础静载试验的锚拔体系是可行的,同时提出了施加预应力大小的原则、方法以及确保后期曾作为锚桩的工程桩有足够承载能力应采取的必要措施。  相似文献   

新近沉积粉细砂层地基的试验与评价     

赵本肖  游占军 《中国煤田地质》2006,18(4):45-46,48

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。  相似文献   

Reliability Based Assessment of Shallow Foundations Using Mathcad     

Ahmad Shlash Alawneh  Osama K. Nusier  Ahmed Abdul-Ezel Al-Mufty 《Geotechnical and Geological Engineering》2006,24(3):637-660

A reliability based method was used to design and analyse shallow foundations using first-order Taylor series approximation. The computer program Mathcad was used to facilitate all mathematical and computional efforts. This method is an effective tool to assist the foundation designers and analyists to investigate how reliable their designs or analyses are in relation to the ultimate bearing capacity of the foundations. The approach presented in this paper provides a reliable alternative for design and analysis of shallow foundations, rather than the conventional design methods, which employs the assumptions of a specified saftey factor. Several examples were presented for design and analysis of strip footings embedded in sandy soil, and rectangular and square footings analysis embedded in clayey soils. The program input and output of each example are also presented and discussed.  相似文献   

CCSD主孔100-2950m榴辉岩类和片麻岩类叶理及微断层产状特征   总被引：1，自引：0，他引：1  

唐哲民 《岩石矿物学杂志》2005,24(5):438-442

CCSD主孔100~2950m榴辉岩、退变榴辉岩类岩石叶理倾角明显较片麻岩类岩石叶理倾角陡,前者总体倾角55°左右,后者28°左右,局部可见片麻岩类叶理切割榴辉岩类叶理,因此两者叶理可能形成于不同时期;两类岩石之间现部分为韧性剪切带接触关系,韧性剪切带形成于苏鲁地体折返主期自SEE向NWW的韧性剪切作用。榴辉岩、退变榴辉岩类岩石叶理产状对发育于该类岩石内的微断层产状有一定控制作用,而片麻岩类岩石叶理产状对发育于该类岩石内的微断层产状控制作用相对较弱。孔区脆性变形主要反映白垩纪以来SEE-NWW向伸展构造应力场的变形特征,主孔100~1620m倾伏向以SEE向占绝对优势的微正滑断层擦痕即为该期变形的产物。  相似文献   

西藏昌都夏通街滑坡成因分析及治理对策     

辜利江  王海兰  赵其华 《中国地质灾害与防治学报》2005,16(2):53-57

西藏昌都地区夏通街滑坡是在古滑坡体上复活的新滑坡。自2001年以来滑坡变形破坏迹象日趋严重，引起了各方的关注。通过对滑坡的现场调查，了解其形成的地质背景。并对变形情况进行长期监测。在分析其变形特征的基础上，对古滑坡体的复活成因机理进行了分析研究。夏通街新滑坡是多种因素综合作用形成的。如河流冲刷、人类工程活动、降雨、地质条件等。其中起控制作用的主要因素是不合理的人类工程活动，特别是修建214国道对坡脚的开挖，使其抗滑段遭到破坏，抗滑力减小。另一控制因素则是连续3a的强降雨，使坡体岩土体力学性质降低，最终导致古滑坡体复活。根据对滑坡变形破坏情况的研究，提出相应的主动防治与被动防治相结合的治理对策。  相似文献   

煤矿井简检查孔施工技术探讨     

耿建国 《中国煤田地质》2005,17(1):39-40

介绍了煤矿井筒检查孔的特点和技术、质量要求,总结了以往工程中的经验教训,针对工程中的技术难点,如取心、孔斜控制、抽水作业和冲洗液选择与维护等影响质量、工期的关键环节提出了技术措施,为优质、高效施工此类工程提供借鉴.  相似文献