龙口港湾大振幅假潮的成因分析     

刘赞沛  陈则实  宋万先  邹娥梅 《海洋学报》2001,23(1):120-126

龙口湾位于山东半岛北部,莱州湾东北隅,为莱州湾的一个附属海湾.海湾湾口朝向西南,湾廓近似半圆形,属半封闭海湾.龙口验潮站位于湾顶(图1),水深7m.  相似文献   

Instrumentation and Numerical Analysis of Cylindrical Diaphragm Wall Movement During Deep Excavation at Coastal Area     

Dong Soo Kim  Byoung Chul Lee 《Marine Georesources & Geotechnology》2005,23(1):117-136

The lateral deflection of a cylindrical diaphragm wall and the associated ground movement induced by deep excavation are analyzed by performing site instrumentations and numerical analyses in the coastal area of Korea. Wall lateral deflection, rebar stress, and pore water pressure were measured and analyzed in eight directions. Variations of soil properties with the decrease of confining pressure are compared by performing various in situ tests before ad after excavation. To calculate the wall lateral deflection accurately, the effects of small strain nonlinearity, confining pressure, and the hysteresis loading/unloading loop developed during excavation are considered in the proposed numerical analysis. By comparing numerical results with measured ones, the importances of considering small strain nonlinearity and confining pressure reduction in the nonlinear (FEM) are emphasized. Also, the effects of wall stiffness on the performance of cylindrical diaphragm walls are studied for future similar excavation in the coastal area.  相似文献   

高精度CTD剖面仪研制过程中的专用设备   总被引：1，自引：1，他引：1  

王欣 《海洋技术学报》2001,20(1):140-142

本文介绍了“油水分离压力罐”的主要理论依据及该设备采用的特殊的机械结构，实践证明，利用该设备实现了在实验室条件下，模拟深海重力场检测CTD剖面仪中的某些关键传感器的目的。  相似文献   

旧路改建高速公路中地基强夯效应测试与工艺参数分析   总被引：2，自引：1，他引：1  

吕国仁  崔新壮 《岩土力学》2008,29(9):2542-2546

旧路改建高速公路遇到的最主要的问题是地基的不均匀沉降。数值分析表明,对新的天然地基进行处理是解决这一问题的关键。强夯是加固地基的一种有效措施,为了对强夯工艺参数进行优化研究,对夯锤冲击地面过程中产生的动孔隙水压力、动土应力以及夯后超静孔隙水压力的消散过程进行了跟踪测试与分析。结果表明,对以风化料为主的地基,最大夯击数不宜超过4击,而且铺底夯完成2d后就可进行满夯。  相似文献   

智能全站仪在大型压力容器焊接变形监测中的应用     

CHEN Ji-hua  JIANG Yan-yun  HUANG Jian-hua  CHU-hu 《测绘学院学报》2008,(3)

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。  相似文献   

岩石圈深部温压条件下萜烷演化的实验研究     

王传远  杜建国  段毅  周晓成  陈志 《矿物岩石》2008,28(2):76-80

在密闭体系中700℃、压力高达3 GPa条件下进行褐煤加水的模拟实验,分析实验产物中的萜烷的变化规律,进而对高压高温下有机质演化进行研究.实验结果表明,相同压力条件下,温度升高有利于有机质的成熟演化;压力增加会抑制或延迟油气的生成和有机质成熟;五环三萜烷ββ生物构型转化为αβ地质构型所需能量比烯烃双键加氢饱和更高.高温超高压条件下,研究样品中C24四环萜烷存在4种同分异构体,含量由高到低依次包括10β(H)-降A-羽扇烷、10p(H)-降A-奥利烷、C24-17,21-断藿烷和10β(H)-降A-乌散烷.高碳数烷烃在地幔高压力条件下仍可以存在,这为认识超压盆地的油气资源与深层油气成藏及保存提供了新的思路.  相似文献   

低渗透储层水平井—直井联合布井极限注采井距研究     

侯晓春  陆程  蔡文  郑兴范 《现代地质》2008,22(1)

低渗透储层水平井—直井联合布井技术具有广泛的应用前景,其布井方式至关重要。首先利用劈分流场的方法直观地给出常规储层水平井—直井联合布井的产能评价方法;然后针对低渗透储层的渗流特点,在考虑启动压力梯度条件下建立新的井网渗流物理模型并求解得到产能评价公式;最后经分析计算给出启动压力梯度影响的面积井网极限注采井距关系曲线。研究结果为低渗透储层部署水平井—直井联合井网提供理论依据。  相似文献   

黔西北威-赫-纳-织-水地区铅锌(铜)矿带上 重力异常反映的地质信息   总被引：4，自引：1，他引：3  

王亮  乔计花  龙超林 《物探与化探》2008,32(4):374-378

研究黔西北威宁—赫章—纳雍—织金—水城地区,铅锌(铜)矿带上分布的1∶20万区域重力异常特征,及其与地质、构造、岩体、化探等异常的对应规律及其关系,能对该区此类矿产的成矿规律、成矿部位和成矿特点的研究有所帮助,提出下一步找矿方向上的参考建议。  相似文献   

黑龙江省中部森林沼泽区金在土壤A层中的富集规律     

胡忠贤  程志中  王学求 《物探与化探》2008,32(1):33-35

探讨了金在黑龙江省中部森林沼泽区A层土壤-10～+60目、-60～+100目、-100～+160目及-160目粒级中的含量分布特征和富集规律。经对比研究认为,-100目可以满足低密度深穿透地球化学详细测量采样要求,该粒级能够有效地发现异常。  相似文献   

Geochemical Mapping: With Special Emphasis on Analytical Requirements     

XIE Xuejing  CHENG Hangxin  LIU Dawen 《《地质学报》英文版》2008,82(2):451-462

More than 40 national and regional geochemical mapping projects in the world carried out from 1973 to 1988 do not conform to common standards. In particular they have many analytical deficiencies. In the period 1988 to 1992, the International Geochemical Mapping project （Project 259 of UNESCO＇s IGCP Program） prepared recommendations designed to standardize geochemical mapping methods. The analytical requirements are an essential component of the overall recommendations. They included the following： 71 elements should be analyzed in future mapping projects; the detection limits of trace and ultratrace elements must be lower than the corresponding crustal abundances; and the Chinese GSD and Canadian STSD standard sample series should be used for the correlation of global data. A proposal was also made to collect 5000 composite samples, at very low sampling densities to cover the whole Earth＇s land surface. In 1997 an IUGS Working Group on Global Geochemical Baselines was formed to continue the work which began with IGCP 259. From 1997 up to now, new progress has been made especially in China and FOREGS countries under the aegis of this working group, including the study of suitable sampling media, development of a multi-element analytical system, new proficiency test for selection of competent laboratories and role of wide-spaced mapping in mineral exploration. One of the major problems awaiting solution has been the inability of many laboratories to meet the IGCP recommendations to generate high quality geochemical maps. Fortunately several laboratories in China and Europe have demonstrated an ability to meet the requirements and they will be well placed to render technical assistance to other countries.  相似文献