经历剪切变形历史的岩石节理表面粗糙特性分析   总被引：5，自引：1，他引：5  

李庆松  杜守继 《岩土力学》2004,25(6):850-855

基于两类岩石节理剪切试验，采用非接触式激光测距仪，实测了剪切前后节理表面粗糙数据，统计分析了岩石节理表面粗糙特性的三维粗糙参数的物理含义，并将这些参数与相应的二维参数进行了充分比较。结果表明，三维参数与二维参数间存在的近似线性关系，而多个三维参数相对比单一的二维参数更全面有效地描述了节理表面粗糙特性。  相似文献   

昌马水库右岸山体稳定性研究   总被引：2，自引：0，他引：2  

杨健  陈祖煜  何传永 《水文地质工程地质》2004,31(1):24-27

昌马水库导流排砂洞塌方导致右岸山体发生松动 ,本文在大量地质资料的基础上 ,对右岸岩体裂隙网络进行模拟 ,同时 ,采用极限分析能量法和有限元数值模拟方法等对右岸山体的稳定性进行分析研究 ,并提出相应的加固方案。  相似文献   

Complex kinematic rupture of the Mw 5.9, 1999 Athens earthquake as revealed by the joint inversion of regional seismological and SAR data     

D. Baumont  O. Scotti  F. Courboulex  N. Melis 《Geophysical Journal International》2004,158(3):1078-1087

  相似文献   

Saprolite Remnants as Indicators of Pre-Glacial Landform Genesis in Southeast Sweden   总被引：3，自引：0，他引：3  

Mats Olvmo  Karna Lidmar-Bergström  Kerstin Ericson  Johan M. Bonow 《Geografiska Annaler: Series A, Physical Geography》2005,87(3):447-460

Twenty‐six sites with remnants of gravelly saprolites (grus) have been located in southeast Sweden. Joint block hills (castle kopjes) and steep rock walls with weathered joints as well as rounded boulders are documented to have an origin in deep weathering and subsequent stripping of saprolites. The saprolite remnants and landforms result from the fragmentation of the re‐exposed sub‐Cambrian peneplain along fracture systems. Only shallow saprolites occur on the elevated intact parts of the sub‐Cambrian peneplain, while saprolites up to 20 m thick are encountered in areas where the sub‐Cambrian peneplain is fractured and dissected. Neogene uplift with reactivation of the weathering system is thought to be the main cause of saprolite formation. Deep weathering is thus judged to have been the major agent of landform formation in the study area, while glacial and glaciofluvial erosion has contributed mainly by stripping saprolites, detaching corestones, and plucking joint blocks along weathered joints.  相似文献   

Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading          下载免费PDF全文

K. Duan  C.Y. Kwok  M. Pierce 《国际地质力学数值与分析法杂志》2016,40(8):1150-1183

A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Constitutive and numerical framework for modeling joints and faults in rock          下载免费PDF全文

Howard Schreyer  Deborah Sulsky 《国际地质力学数值与分析法杂志》2016,40(9):1253-1283

A three‐dimensional constitutive model for joints is described that incorporates nonlinear elasticity based on volumetric elastic strain, and plasticity for both compaction and shear with emphasis on compaction. The formulation is general in the sense that alternative specific functional forms and evolution equations can be easily incorporated. A corresponding numerical structure based on finite elements is provided so that a joint width can vary from a fraction of an element size to a width that occupies several elements. The latter case is particularly appropriate for modeling a fault, which is considered simply to be a joint with large width. For small joint widths, the requisite equilibrium and kinematic requirements within an element are satisfied numerically. The result is that if the constitutive equation for either the joint or the rock is changed, the numerical framework remains unchanged. A unique aspect of the general formulation is the capability to handle either pre‐existing gaps or the formation of gaps. Representative stress–strain plots are given to illustrate both the features of the model and the effects of changes in values of material parameters. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

水库群水沙调控的单-多目标调度模型及其应用          下载免费PDF全文

白涛  阚艳彬  畅建霞  袁梦 《水科学进展》2016,27(1):116-127

为缓解内蒙古河段"二级悬河"形势,以黄河上游沙漠宽谷河段为研究对象,以龙羊峡水库、刘家峡水库为调控主体,开展黄河上游水沙调控研究。建立了输沙量、发电量最大的单目标模型以及多目标模型;分别采用自迭代模拟算法、逐次逼近动态规划算法(DPSA)和改进的非支配排序遗传优化算法(NSGA-Ⅱ)求解模型;设置了初始、常规、优化和联合优化4种方案。通过实例计算,联合优化调度方案的区间总冲刷量达到了0.38亿t,梯级发电量148.22亿kW·h。该方案以较小的电量损失换来了输沙量的大幅度增加,水沙调控效果显著,推荐为最优方案。研究成果量化了水沙调控效果和各目标间的转化规律,为开展黄河上游水沙调控提供了决策依据,具有重要的应用价值和实际指导意义。  相似文献   

基于峰值因子最大化的鬼波压制方法     

叶林  韩立国  李洪建  张威  李宇  于晨霞 《世界地质》2016,35(4):1101-1108

针对传统拖缆采集得到的海上地震资料受鬼波影响而导致频带宽度变窄,笔者提出一种去鬼波方法,可以压制鬼波效应,拓宽频带。首先在频率-空间域推导出镜像数据生成公式,并基于峰值因子最大化的参数搜索方法来估计最优的鬼波延迟时间,将最优的鬼波延迟时代入镜像记录生成公式,获得最优的镜像记录,利用联合反褶积算法得到最优的去鬼波结果。将本文中的方法应用于模拟的变深度采集数据和海上实测的变深度采集数据,证实该方法可以有效地压制鬼波,消除频谱中的陷波点,得到宽频数据。  相似文献   

全过程联合校正方法在饶河流域洪水预报中的应用研究     

王钦钊  黄一昕  梁忠民  邓晓栋 《水文》2021,41(2):45-50

为提高饶河流域洪水预报精度,将全过程联合校正(EPJC)方法与三水源新安江(XAJ)模型结合,按一定比例划分洪水预报总误差为各过程误差,基于系统响应理论反演得到面雨量计算误差和模型参数误差,重新输入流域水文模型正演得出校正后的洪水过程。选取洪峰流量相对误差、峰现时间绝对误差、径流深相对误差和确定性系数作为模型评价指标,量化XAJ预报与EPJC校正结果,并与传统的动态系统响应曲线(DSRC)方法进行对比。结果表明,EPJC能够考虑全过程误差,与实际误差分布情况更相符,可提升饶河流域的洪水作业预报精度,值得进一步研究与推广。  相似文献   

节理分布空间变异的地下洞室稳定性概率分析   总被引：1，自引：0，他引：1  

王川  冷先伦  李海轮  李刚 《岩土力学》2021,(1):224-232,244

以岩土材料力学参数空间变异性的"点估计-有限元"分析方法为基础,结合节理分析时自身存在几何模型、网格划分等特性,扩展了该方法在节理分布空间变异性分析方面的适用性,明确了具体的研究步骤与方法。以某抽水蓄能水电站为例,通过分析节理空间变异性对围岩变形与塑性区的影响,验证了扩展后该方法的准确性和合理性。对工程案例开挖揭露的1400余条节理进行概率统计,建立了节理空间变异性的有限元分析模型;采用扩展后的概率分析方法,研究了节理分布对地下洞室群围岩开挖稳定性的影响。研究结果表明:(1)对比概率分析得到的围岩变形概率分布与现场监测结果,发现剔除变形异常点后监测变形量值大部分位于得到的位移概率分布范围内,说明节理的空间变异性是导致监测变形波动的主要影响因素;(2)围岩变形概率分布的标准差能有效识别出围岩开挖变形受节理空间变异性的影响程度,对于所给出的案例依次为:机窝>边墙>顶拱;(3)围岩塑性区的概率分区能合理判断地下洞室群开挖时受节理影响较大的区域和范围,为工程施工的支护设计提供依据。  相似文献