三峡库区泥灰质岩石斜坡带构造对岩溶地质灾害的控制机理   总被引：1，自引：0，他引：1  

张加桂 《水文地质工程地质》2004,31(6):43-47

三峡库区三叠系巴东组(T26)泥灰质岩石岩溶是移民迁建中发现的重大工程地质问题。泥灰质岩石中的构造非常复杂，包括老构造、新构造和表生构造，它们共同控制了岩溶作用。老构造中，褶皱和断裂带等局部构造控制着岩溶的重要部位和重要层位，节理和层理等小构造使岩溶普遍存在。新构造时期地表隆升和河流切割使岩体卸荷松动，岩溶通道扩宽。表生岩溶构造加密了岩溶通道，使岩溶作用增强。三峡库区泥灰质岩石斜坡带地质灾害形成的机理遵循着构造控制下岩溶发育的规律性，致使岩溶地质灾害具有范围广、规模大和结构复杂的特点。岩溶地质灾害的形式包括地面不均匀沉降、地裂缝、滑坡、崩塌、泥石流和地面塌陷。  相似文献   

泥浆脉冲随钻测量系统研究   总被引：1，自引：0，他引：1  

卢春华  张涛  李海东 《地质科技情报》2005,24(Z1):30-32

介绍了泥浆脉冲随钻测量系统信号传输的3种基本工作方式:压力正脉冲、压力负脉冲和连续压力波.泥浆脉冲信号在传输过程中主要受钻探泵、井底动力机、泥浆中的气泡及活动钻具的干扰;钻井深度、泥浆中的气泡量、含砂量和泥浆类型对信号衰减有一定的影响.  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

The 2019 Brumadinho tailings dam collapse: Possible cause and impacts of the worst human and environmental disaster in Brazil     

《International Journal of Applied Earth Observation and Geoinformation》2020

On 25th January 2019, the tailings dam of the Brumadinho iron mine operated by Vale S/A failed catastrophically. The death toll stood at 259 and 11 people remained missing as of January 2020. This tragedy occurred three years after Mariana’s tailings dam rupture – the most significant tailing dam disaster in Brazilian history. Thus far, a systematic investigation on the cause and effect of the failure has yet to be conducted. Here, we use satellite-driven soil moisture index, multispectral high-resolution imagery and Interferometric Synthetic Aperture Radar (InSAR) products to assess pre-disaster scenarios and the direct causes of the tailings dam collapse. A decreasing trend in the moisture content at the surface and the full evanescence of pond water through time (2011–2019) suggest that the water was gradually penetrating the fill downwards and caused the seepage erosion, saturating the tailings dam. Large-scale slumping of the dam (extensional failure) upon the rupture indicates that the materials of the fill were already saturated. InSAR measurements reveal a dramatic, up to 30 cm subsidence in the dam (at the rear part) within the past 12 months before the dam collapse, signifying that the sediments had been removed from the fill. Although the information on the resistance level of the tailings dam to infiltrations is not available, these pieces of evidence collectively indicate that the seepage erosion (piping) is the primary cause for the chronic weakening of the structure and, hence, the internal “liquefaction” condition. Upon the collapse, the fully saturated mud tailings flowed down the gentle slope area (3.13 × 10⁶ m²), where 73 % were originally covered by tree, grass or agricultural tracts. The toxic mud eventually reached the Paraopeba River after travelling 10 km, abruptly increasing the suspended particulate matter (SPM) concentration and the toxic chemical elements in the river, immediately affecting the local livelihoods that depend on its water. The Paraopeba River is a major tributary of the San Francisco River, the second-longest river in Brazil reaching the Atlantic Ocean. We anticipate that the environmental repercussions of this toxic seepage will be felt throughout the entire basin, especially riverine communities located downstream.  相似文献   

Impacts of confining pressure and safety thickness on water and mud inrush in weathered granite     

Jinquan Liu  Weizhong Chen  Zhiping Deng  Taogen Liu 《Marine Georesources & Geotechnology》2020,38(2):144-153

Abstract

Due to the strong disintegration and water erosion of completely weathered granite, water and mud inrush disasters are apt to take place in this zone during underwater tunnel construction. The pore, compactness, seepage path length, fracture geometries and their interconnections for water and mud transfer are strongly influenced by confining pressure and waterproof-resistant slab safety thickness. In order to inspect the influence, a series of experiments based on a self-designed testing system and non-Darcy testing method were performed. The results indicated that the water and mud inrush evolution increased with the increase of confining pressure and decreased with the increase of safety thickness. In particular, the confining pressure mainly influences the initial evolution stage, and a critical safety thickness to prevent water and mud inrush is obtained. Besides, the non-Darcy testing method results shows that the water and mud inrush evolution affects the influence of non-Darcy flow. For example, while the safety thickness was smaller than the critical value, the evolution was large and unstable and its behavior transferred into nonlinear. In this case, the flow changed to non-Darcy flow.  相似文献   

Thresholds of intrabed flow and other interactions of turbidity currents with soft muddy substrates          下载免费PDF全文

Jaco H. Baas  Rafael Manica  Eduardo Puhl  Ana Luiza de Oliveira Borges 《Sedimentology》2016,63(7):2002-2036

Controlled laboratory experiments reveal that the lower part of turbidity currents has the ability to enter fluid mud substrates, if the bed shear stress is higher than the yield stress of the fluid mud and the density of the turbidity current is higher than the density of the substrate. Upon entering the substrate, the turbidity current either induces mixing between flow‐derived sediment and substrate sediment, or it forms a stable horizontal flow front inside the fluid mud. Such ‘intrabed’ flow is surrounded by plastically deformed mud; otherwise it resembles the front of a ‘bottom‐hugging’ turbidity current. The ‘suprabed’ portion of the turbidity current, i.e. the upper part of the flow that does not enter the substrate, is typically separated from the intrabed flow by a long horizontal layer of mud which originates from the mud that is swept over the top of the intrabed flow and then incorporated into the flow. The intrabed flow and the mixing mechanism are specific types of interaction between turbidity currents and muddy substrates that are part of a larger group of interactions, which also include bypass, deposition, erosion and soft sediment deformation. A classification scheme for these types of interactions is proposed, based on an excess bed shear stress parameter, which includes the difference in the bed shear stress imposed by the flow and the yield stress of the substrate and an excess density parameter, which relies on the density difference between the flow and the substrate. Based on this classification scheme, as well as on the sedimentological properties of the laboratory deposits, an existing facies model for intrabed turbidites is extended to the other types of interaction involving soft muddy substrates. The physical threshold of flow‐substrate mixing versus stable intrabed flow is defined using the gradient Richardson number, and this method is validated successfully with the laboratory data. The gradient Richardson number is also used to verify that stable intrabed flow is possible in natural turbidity currents, and to determine under which conditions intrabed flow is likely to be unstable. It appears that intrabed flow is likely only in natural turbidity currents with flow velocities well below ca 3·5 m s^?1, although a wider range of flows is capable of entering fluid muds. Below this threshold velocity, intrabed flow is stable only at high‐density gradients and low‐velocity gradients across the upper boundary of the turbidity current. Finally, the gradient Richardson number is used as a scaling parameter to set the flow velocity limits of a natural turbidity current that formed an inferred intrabed turbidite in the deep‐marine Aberystwyth Grits Group, West Wales, United Kingdom.  相似文献   

国家地下水监测井建设关键问题研究          下载免费PDF全文

卢予北  李艺  陈莹  王建华  申云飞 《探矿工程》2016,43(6):1-6

国家地下水监测工程建设由国土资源部和水利部联合立项申报,历经10余年的可行性研究和评估论证,最终由国家发展和改革委员会批准实施。项目财政投资20多亿元,覆盖全国31个省、区、市及新疆建设兵团,涵盖了全国7大流域和16个重要水文地质单元,共布设20401个地下水监测站点。项目的组织实施意义重大,事关地质环境、饮水安全和经济社会的可持续发展等民生问题。其中,钻探工程决定着国家地下水监测工程建设的质量、运行效果及使用寿命。本文针对项目“地域分布广、施工战线长、地质条件复杂”等特点,从组织管理、钻井结构设计、成井管材和钻进工艺选择等方面的关键问题进行了分析研究,并提出了具体建议。  相似文献   

油气上窜速度实用计算方法          下载免费PDF全文

孙晓波 《探矿工程》2016,43(9):47-51

油气上窜速度对钻井施工中下一步施工方案的制定具有重要参考价值。文章在总结分析前人经验的基础上结合现场施工实际对传统油气上窜速度计算公式加以修正,并对修正后的公式中涉及到的参数进行了逐一分析,在不影响正常施工工序的条件下使公式中各参数取值准确性进一步提高。通过现场工程测试,该方法简单实用且计算准确性较高。该计算方法在保证计算结果准确性的同时,也具备较强的现场可操作性,通过大量的实践检验后可进一步推广。  相似文献   

若尔盖铀矿田漏失层空心微珠泥浆试验研究          下载免费PDF全文

吴金生  董洪栋  张统得  刘卫东 《探矿工程》2016,43(3):9-12

若尔盖铀矿是我国四大基本类型铀矿田之一,矿层为灰岩、硅灰岩,圈团状纵向裂隙发育,长孔段失返性全漏失,泥浆性能难以维护,孔壁失稳,堵漏花费大量的人力、物力。为提高钻进效率,针对地层漏失机理,通过降低漏失压力实现平衡钻进,分别开展了空气泡沫、微泡沫泥浆以及空心微珠等低密度泥浆体系的研究和试验。实践表明,空心微珠低密度泥浆体系是一种适合若尔盖铀矿田漏失层钻进的泥浆体系。  相似文献   

河元背地区绳索取心钻进泵压计算模型的建立与应用          下载免费PDF全文

康鑫  李生海  刘晓阳  王荣璟  段隆臣 《探矿工程》2016,43(2):28-31

泵压是反映金刚石绳索取心钻进时井内作业是否正常的重要参数。为了进一步研究泵压波动变化与实际钻进作业之间的关系,指导钻进工作的快速、安全开展,结合江西相山河元背地区CUSD2井实际泵压波动数据及相关钻进资料,建立了适用于本井的循环系统压力损失计算模型。对比分析模型计算的理论泵压与实际泵压的波动变化趋势,将模型应用于实际钻进,在此基础上预测后续地层的泵压波动区域范围,发现7 MPa的泵压安全值不再适用于后续地层钻进,调整设置泵压安全值为10 MPa,并利用邻井泵压波动数据进一步验证其可靠性。适当调整修正理论模型,使其可应用于河元背以及相山地区绳索取心钻进中,指导该地区钻探工作。  相似文献