哈萨克斯坦科扎萨伊油田优快钻井技术          下载免费PDF全文

翁行芳 《探矿工程》2021,48(9):46-53

哈萨克斯坦科扎萨伊油田钻井地质环境复杂,储层位于盐下,钻遇的地层层系多,地层性质差异大,具多套压力系统。钻井过程中发生地层漏失、坍塌、掉块及盐膏层蠕变等复杂情况,严重影响了钻井时效和钻井安全。针对这些技术难题,开展了油田井身结构、井身质量、提速潜力、高效钻头等分析与优化,提出了预弯曲钻具高倾角地层井斜控制技术、混合钻头减震提速技术,以及PDC-孕镶块复合钻头高研磨性地层提速技术。现场应用取得了较好的效果,平均机械钻速提高50%以上,钻井周期缩短28%。  相似文献   

海上油田开发井钻井优化设计和应用实践          下载免费PDF全文

董振国  熊伟  龚长芳  李进宏 《探矿工程》2021,48(7):46-57

LF7-2油田位于我国南海珠江口盆地LF区块,是一个小规模油田,根据前期探井揭示,上部地层以厚层泥岩为主,极易水化、分散,使钻井液性能变差;起下钻过程中钻具遇卡、遇阻等复杂情况频繁发生;钻头选型不尽合理,易泥包;下部地层以砂泥岩互层为主,岩石致密、可钻性变差,钻具扭矩、摩阻增加,定向钻进时滑动困难,井眼轨迹控制难度大,给钻井提速增效带来诸多困难。根据探井地质情况和岩石力学剖面,利用钻井软件优选平台位置,对开发井井身结构、井眼轨迹、钻柱力学、钻井液、固井等方面进行钻井仿真模拟,制定出科学的钻井设计方案,在直井段采用“牙轮钻头+直螺杆+MWD”钻具开展防斜打直,造斜段使用“PDC钻头+弯螺杆+MWD/LWD”开展复合钻井,水平段采用“PDC钻头+PowerDriver+MWD/LWD”开展旋转导向钻井,实现精准化钻井,顺利完成6口开发井施工。现场应用单井平均机械钻速29.43 m/h,钻井工期191.59 d,工期比设计提前28.41 d,钻井提速增效显著,降低开发成本。通过PowerDriver的近钻头井斜、自然伽马实时测量和传输,减少地质误判,实现对储层顶界面的实时探测,使储层钻遇率达100%,收到较好的经济效益和投资回报,实现小油田的效益开发。  相似文献   

白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

Stress‐dependent hardening and failure surfaces of dry sand     

W. Ehlers  O. Avci 《国际地质力学数值与分析法杂志》2013,37(8):787-809

During several triaxial compression experiments on plastic hardening, softening, and failure properties of dense sand specimens, it was found on various stress paths that the size of the failure surface was not constant. Instead, it changed depending on the current state of hydrostatic pressure. This finding is in contrast to the standard opinion consisting of the fact that the failure surface remains constant, once it has been reached during an experiment or in situ. In general, the behaviour of cohesionless granular‐material‐like sand is somehow characterised in between fluid and solid, where the solid behaviour results from the angle of internal friction and the confining pressure. Although the friction angle is an intrinsic material property, the confining pressure varies with the boundary conditions, thus defining different solid properties like plastic hardening, softening, and also failure. Based on our findings, it was the goal of the present contribution to introduce an improved setting for the plastic strain hardening and softening behaviour including the newly found yield properties at the limit state. For the identification of the material parameters, a complete triaxial experimental analysis of the tested sand is given. The overall elasto‐plasticity concept is validated by numerical computations of several laboratory foundation‐ and slope‐failure experiments. The performance of the proposed approach is compared with the standard concept of a constant failure surface, where the corresponding yield surfaces are understood as contours of equivalent plastic work or plastic strain. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Performing a new regional geography     

Gordon Winder  Nick Lewis 《New Zealand geographer》2010,66(2):97-104

In this introduction to the Special Issue ‘Practising a New Regional Geography in Northland’, we call for a new regional geography. We use the experience of a field course to reflect upon the opportunities and challenges associated with doing ‘regional geography’ in the regions, a subdiscipline that has in recent decades been pushed into the backwaters of the discipline. We reinterpret the maxim ‘geography is what geographers do’ in a new way that emphasises pedagogy and research practice. The case of Northland and helping our students to learn experientially about community and environment under the rubric of sustainability allows us to argue the case for a reinterpretation of regional geography in these terms. We position the contributions in this Special Issue in terms of our call.  相似文献   

Micromechanical viscoelasto‐plastic models and finite element implementation for rate‐independent and rate‐dependent permanent deformation of stone‐based materials     

Qingli Dai 《国际地质力学数值与分析法杂志》2010,34(13):1321-1345

This paper presents parallel and serial viscoelasto‐plastic models to simulate the rate‐independent and the rate‐dependent permanent deformation of stone‐based materials, respectively. The generalized Maxwell viscoelastic and Chaboche's plastic models were employed to formulate the proposed parallel and serial viscoelasto‐plastic constitutive laws. The finite element (FE) implementation of the parallel model used a displacement‐based incremental formulation for the viscoelastic part and an elastic predictor—plastic corrector scheme for the elastoplastic component. The FE framework of the serial viscoelasto‐plastic model employed a viscoelastic predictor—plastic corrector algorithm. The stone‐based materials are consisted of irregular aggregates, matrix and air voids. This study used asphalt mixtures as an example. A digital sample was generated with imaging analysis from an optically scanned surface image of an asphalt mixture specimen. The modeling scheme employed continuum elements to mesh the effective matrix, and rigid bodies for aggregates. The ABAQUS user material subroutines defined with the proposed viscoelasto‐plastic matrix models were employed. The micromechanical FE simulations were conducted on the digital mixture sample with the viscoelasto‐plastic matrix models. The simulation results showed that the serial viscoelasto‐plastic matrix model generated more permanent deformation than the parallel one by using the identical material parameters and displacement loadings. The effect of loading rates on the material viscoelastic and viscoelasto‐plastic mixture behaviors was investigated. Permanent deformations under cyclic loadings were determined with FE simulations. The comparison studies showed that the simulation results correctly predicted the rate‐independent and rate‐dependent viscoelasto‐plastic constitutive properties of the proposed matrix models. Overall, these studies indicated that the developed micromechanical FE models have the abilities to predict the global viscoelasto‐plastic behaviors of the stone‐based materials. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Trend detection in river flow series: 1. Annual maximum flow / Détection de tendance dans des séries de débit fluvial: 1. Débit maximum annuel     

《水文科学杂志》2013,58(5)

Abstract

Results of a study on change detection in hydrological time series of annual maximum river flow are presented. Out of more than a thousand long time series made available by the Global Runoff Data Centre (GRDC) in Koblenz, Germany, a worldwide data set consisting of 195 long series of daily mean flow records was selected, based on such criteria as length of series, currency, lack of gaps and missing values, adequate geographical distribution, and priority to smaller catchments. The analysis of annual maximum flows does not support the hypothesis of ubiquitous growth of high flows. Although 27 cases of strong, statistically significant increase were identified by the Mann-Kendall test, there are 31 decreases as well, and most (137) time series do not show any significant changes (at the 10% level). Caution is advised in interpreting these results as flooding is a complex phenomenon, caused by a number of factors that can be associated with local, regional, and hemispheric climatic processes. Moreover, river flow has strong natural variability and exhibits long-term persistence which can confound the results of trend and significance tests.  相似文献   

Pulse generation models for daily intermittent streamflows / Modèles de génération d’impulsions pour des débits journaliers intermittents     

《水文科学杂志》2013,58(3)

Abstract

Abstract Generating pulses and then converting them into flow are two main steps of daily streamflow generation. Three pulse generation models have been proposed on the basis of Markov chains for the purpose of generating daily intermittent streamflow time series in this study. The first one is based on two two-state Markov chains, whereas the second uses a three-state Markov chain. The third model uses harmonic analysis and fits Fourier series to the three-state Markov chain. Results for a daily intermittent streamflow data series show a good performance of the proposed models.  相似文献   

Flood forecasting and infiltration modeling/Prévision de crue et modélisation de l’infiltration     

《水文科学杂志》2013,58(2)

Abstract

Abstract The role of accuracy in the representation of infiltration on the effectiveness of real-time flood forecasting models was investigated. A simple semi-distributed model of conceptual type with adaptive estimate of hydraulic characteristics included in the infiltration component was selected. Infiltration was described by a very accurate approach recently formulated for complex rainfall patterns, or alternatively through a simpler formulation known as an extension of the classical time compression approximation. The results indicated that, for situations involving a significant rainfall variability in space, the inaccuracy in the representation of infiltration cannot be corrected by the adaptive component of the rainfall–runoff model. A preliminary analysis of the role of an approximation of saturated hydraulic conductivity to be used in each homogeneous area of the semi-distributed model used both in non-adaptive version and in real-time is also presented.  相似文献   

Correlation between geochemical environments and controlling factors in the metallation of porphyrins     

Gadi Lipiner  Itamar Willner  Zeev Aizenshtat   《Organic Geochemistry》1988,13(4-6)

Experimental study on metallation of tetrapyrroles in biphasic systems showed that complexation with metal cations of the first transition series is a feasible under chemical environments similar to the naturally occurring ones. The metal transport from the aqueous media to the organic, which is a novel approach using naturally occurring fatty acids hydroxy aromatic compounds and thiols, is demonstrated. Selectivity between Ni²⁺ and VO²⁺ complexation is achieved under sulfurous rich conditions. The kinetic implications are discussed in view of their geoenvironmental applicability.  相似文献