Parameter identification of framed structures using an improved finite element model‐updating method—Part I: formulation and verification     

Eunjong Yu  Ertugrul Taciroglu  John W. Wallace 《地震工程与结构动力学》2007,36(5):619-639

In this study, we formulate an improved finite element model‐updating method to address the numerical difficulties associated with ill conditioning and rank deficiency. These complications are frequently encountered model‐updating problems, and occur when the identification of a larger number of physical parameters is attempted than that warranted by the information content of the experimental data. Based on the standard bounded variables least‐squares (BVLS) method, which incorporates the usual upper/lower‐bound constraints, the proposed method (henceforth referred to as BVLSrc) is equipped with novel sensitivity‐based relative constraints. The relative constraints are automatically constructed using the correlation coefficients between the sensitivity vectors of updating parameters. The veracity and effectiveness of BVLSrc is investigated through the simulated, yet realistic, forced‐vibration testing of a simple framed structure using its frequency response function as input data. By comparing the results of BVLSrc with those obtained via (the competing) pure BVLS and regularization methods, we show that BVLSrc and regularization methods yield approximate solutions with similar and sufficiently high accuracy, while pure BVLS method yields physically inadmissible solutions. We further demonstrate that BVLSrc is computationally more efficient, because, unlike regularization methods, it does not require the laborious a priori calculations to determine an optimal penalty parameter, and its results are far less sensitive to the initial estimates of the updating parameters. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Identification of modal parameters of non‐classically damped linear structures under multi‐component earthquake loading     

M. Mahmoudabadi  M. Ghafory‐Ashtiany  M. Hosseini 《地震工程与结构动力学》2007,36(6):765-782

A method for parametric system identification of classically damped linear system in frequency domain is adopted and extended for non‐classically damped linear systems subjected up to six components of earthquake ground motions. This method is able to work in multi‐input/multi‐output (MIMO) case. The response of a two‐degree‐of‐freedom model with non‐classical damping, excited by one‐component earthquake ground motion, is simulated and used to verify the proposed system identification method in the single‐input/multi‐output case. Also, the records of a 10 storey real building during the Northridge earthquake is used to verify the proposed system identification method in the MIMO case. In this case, at first, a single‐input/multi‐output assumption is considered for the system and modal parameters are identified, then other components of earthquake ground motions are added, respectively, and the modal parameters are identified again. This procedure is repeated until all four components of earthquake ground motions which are measured at the base level of the building are included in the identification process. The results of identification of real building show that consideration of non‐classical damping and inclusion of the multi‐components effect of earthquake ground motions can improve the least‐squares match between the finite Fourier transforms of recorded and calculated acceleration responses. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Non‐linear system identification of the versatile‐typed structures by a novel signal processing technique     

Jian Zhang  Tadanobu Sato  Susumu Iai 《地震工程与结构动力学》2007,36(7):909-925

Non‐linear structural identification problems have raised considerable research efforts since decades, in which the Bouc–Wen model is generally utilized to simulate non‐linear structural constitutive characteristic. Support vector regression (SVR), a promising data processing method, is studied for versatile‐typed structural identification. First, a model selection strategy is utilized to determine the unknown power parameter of the Bouc–Wen model. Meanwhile, optimum SVR parameters are selected automatically, instead of tuning manually. Consequently, the non‐linear structural equation is rewritten in linear form, and is solved by the SVR technique. A five‐floor versatile‐type structure is studied to show the effectiveness of the proposed method, in which both power parameter known and unknown cases are investigated. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

A non‐baseline algorithm for damage locating in flexural structures using dynamic distributed macro‐strain responses     

S. Z. Li  Z. S. Wu 《地震工程与结构动力学》2007,36(9):1109-1125

The concept of distributed strain‐sensing techniques has been proposed in our recent research, which was dedicated to utilizing the strain distributions throughout the full or partial areas of structures to detect arbitrary and unforeseen damage. An algorithm not requiring a detailed analytical model is presented for damage locating in flexural structures through the direct use of dynamic responses recorded by distributed long‐gauge strain sensors. The modal macro‐strain vector (MMSV), which has been proven to have a mapping relation with displacement mode shape, can be extracted directly from macro‐strain time‐series data, from which a damage evaluating index can be derived and used as an indicator for locating damage. Numerical examples are simulated to verify the sensitivity and effectiveness of the index in different cases. Furthermore, experimental investigations on a cantilevered beam with various long‐gauge fibre optic sensors placements are carried out to examine the feasibility and applicability of the proposed method. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

绿柱石通道中配合物的振动光谱和辐照裂解   总被引：2，自引：1，他引：2  

亓利剑  叶松  向长金  裴景成  石国华 《地质科技情报》2001,20(3):59-64

以四川平武富碱型绿柱石为研究对象 ,采用 IR和 L RM测试方法 ,重点对通道中氢化物和多聚合离子的配位构型、辐照裂解及热致转型进行了较深入系统的研究。研究表明 ,在该区成矿作用条件下 ,绿柱石通道中的钠离子趋向与氢离子化合反应生成 Na H氢化物 ,并占据通道中的 C2 位。在垂直 c轴方向上 ,以 3165 cm-1,3114 cm-1及 30 31cm-1伸缩振动弱吸收谱带为特征。[Fe2 ( OH) 4 ] 2 多聚合离子占据通道中的 C1位 ,以 32 34 cm-1伸缩振动锐吸收谱带为特征 (∥ c轴 )。辐照作用导致上述多聚合离子的裂解 ,并形成不稳定的 [H0 ] i心和相对稳定的 [Fe3 ] OH心。与之对应的吸收谱带分别出现在 3110 cm-1(⊥ c轴 )和 335 5cm-1(∥c轴 )处。通道中 Na H和 [Fe2 ( OH) 4 ] 2 多聚合离子的存在 ,可视为该类型绿柱石的一个重要的成因标志。  相似文献   

滑坡稳定性判别的非计算方法   总被引：2，自引：6，他引：2  

孔纪名 《山地学报》2001,19(5):446-451

用计算来确定滑坡的稳定性，由于参数选取存不确定因素，就必然导致了其计算结果的不确定性。而滑坡稳定性判别的非计算方法，是通过对滑坡发育程度、形成条件的综合分析来确定滑坡的稳定程度的方法。文中通过归纳分析波坡的形成条件，然后从滑坡地貌条件、动力作用、堆积物特征、诱发因素等方面详细阐述了滑坡稳定性判别的方法，最后，例举了川藏公路102滑坡实例对该方法进行了验证。实践证明该方法是滑坡稳定性中非常实用和有效的方法。  相似文献   

Transition To Geostrophic Turbulence In The Laboratory, And As A Paradigm In Atmospheres And Oceans     

Peter L. Read 《Surveys in Geophysics》2001,22(3):265-317

  相似文献   

浅议地球系统的复杂性及非线性   总被引：1，自引：0，他引：1  

王瑞廷 《世界地质》2001,20(4):313-320

结合复杂性科学的产生及发展历程，认为复杂性科学对研究地球系统复杂性及非线性具有重要的理论指导和方法论意义。同时，在论述地球系统基本属性的基础上总结了地球系统复杂性及非线性的具体表现，即地球系统的层次性，无特征尺度性，开放性，相干性，临界性，自组织性和其动力学行为的自相似性及分形性。认为地球系统是总体上远离平衡，时空延展的多层圈综合集成，连续开放的复杂耗散动力巨系统。随着复杂性科学和地球系统的复杂性及非线性研究的不断深入，在21世纪，地球科学研究将会取得理论上的重大突破和飞跃。  相似文献   

Improved dynamic correction method in seismic analysis of both classically and non‐classically damped structures     

Antonino D'Aveni  Giuseppe Muscolino 《地震工程与结构动力学》2001,30(4):501-517

A step‐by‐step approximate procedure taking into consideration high‐frequency modes, usually neglected in the modal analysis of both classically and non‐classically damped structures, is presented. This procedure can be considered as an extension of traditional modal correction methods, like the mode‐acceleration method and the dynamic correction method, which are very effective for structural systems subjected to forcing functions described by analytical laws. The proposed procedure, herein called improved dynamic correction method, requires two steps. In the first step, the number of differential equations of motion are reduced and consequently solved by using the first few undamped mode‐shapes. In the second step, the errors due to modal truncation are reduced by correcting the dynamic response and solving a new set of differential equations, formally similar to the original differential equations of motion. The difference between the two groups of differential equations lies in the forcing vector, which is evaluated in such a way as to correct the effects of modal truncation on applied loads. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

Pounding of structures modelled as non‐linear impacts of two oscillators     

K. T. Chau  X. X. Wei 《地震工程与结构动力学》2001,30(5):633-651

A new formulation is proposed to model pounding between two adjacent structures, with natural periods T₁ and T₂ and damping ratios ζ₁ and ζ₂ under harmonic earthquake excitation, as non‐linear Hertzian impact between two single‐degree‐of‐freedom oscillators. For the case of rigid impacts, a special case of our analytical solution has been given by Davis (‘Pounding of buildings modelled by an impact oscillator’ Earthquake Engineering and Structural Dynamics, 1992; 21 :253–274) for an oscillator pounding on a stationary barrier. Our analytical predictions for rigid impacts agree qualitatively with our numerical simulations for non‐rigid impacts. When the difference in natural periods between the two oscillators increases, the impact velocity also increases drastically. The impact velocity spectrum is, however, relatively insensitive to the standoff distance. The maximum relative impact velocity of the coupled system can occur at an excitation period T_n^* which is either between those of the two oscillators or less than both of them, depending on the ratios T₁/T₂ and ζ₁/ζ₂. Although the pounding force between two oscillators has been primarily modelled by the Hertz contact law, parametric studies show that the maximum relative impact velocity is not very sensitive to changes in the contact parameters. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献