大厂矿区坑道磁测找矿试验     

吴国富 《矿产与地质》2004,18(4):397-399

大厂矿区一条长1．5km的运输巷道内进行了高精度磁测找矿试验，并进行了地质钻探验证。结果表明：在将局部磁性干扰压抑后，所获相对磁异常是可以取得找矿效果的。  相似文献   

采空区上方修建大型建筑物地基稳定性评价   总被引：6，自引：0，他引：6  

郭惟嘉  王勇义 《岩土力学》2004,25(Z1):57-59

地表移动变形随时间的稳定性及剩余变形问题一直是采动覆岩沉陷研究的重要方面。笔者分析了采动地表移动变形的时间过程,探讨了地表沉陷的延续时间及地表剩余沉陷的预计方法,给出了采空区上方修建大型建筑物地基稳定性评价的指标,对采空区上建设建筑物提出了相应的技术措施。  相似文献   

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters   总被引：2，自引：0，他引：2  

Jacinta Enzweiler  Maria Aparecida Vendemiatto 《Geostandards and Geoanalytical Research》2004,28(1):103-112

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.  相似文献   

A Reflection on Mg, Cd, Ca, Li and Si Isotopic Measurements and Related Reference Materials   总被引：6，自引：1，他引：6  

Jean Carignan  Damien Cardinal  Anton Eisenhauer  Albert Galy  Mark Rehkamper  Frank Wombacher  Nathalie Vigier 《Geostandards and Geoanalytical Research》2004,28(1):139-148

This contribution aims to report the reflections we had with the scientific community during two international workshops on reference materials for stable isotopes in Davos (2002) and Nice (2003). After evaluating the isotopic homogeneity of some existing reference materials, based on either certificates, literature data or specific inter-laboratory rounds, we confirm these as primary reference materials or propose new ones relative to which stable isotope compositions should be reported. We propose DSM-3 for Mg, NIST SRM 915a for Ca, L-SVEC for Li and NBS28 for Si. Cadmium does not yet have a well identified delta zero material, although three commercial mono-elemental Cd solutions have yielded the same isotopic composition relative to one another. In order to scale the linearity of any mass spectrometer, some secondary reference materials are also proposed: Cambridge-1 solution for Mg, the "Münster-Cd" and JEPPIM Cd solutions for Cd and the "Big Batch" silicate for Si. The team from Nancy propose to prepare a mixed spike solution for Li isotopes. Well-characterised natural samples such as ocean or continental waters, diatoms, sponges, rocks and minerals are needed to validate the entire analytical procedure, particularly to take into account the effect of sample mineralisation and of chemical manipulations for elemental separation prior to analysis.  相似文献   

Precise/ Small Sample Size Determinations of Lithium Isotopic Compositions of Geological Reference Materials and Modern Seawater by MC-ICP-MS   总被引：6，自引：1，他引：6  

Alistair B. Jeffcoate  Tim Elliott  Alex Thomas  Claudia Bouman 《Geostandards and Geoanalytical Research》2004,28(1):161-172

The Li isotope ratios of four international rock reference materials, USGS BHVO-2, GSJ JB-2, JG-2, JA-1 and modern seawater (Mediterranean, Pacific and North Atlantic) were determined using multi-collector inductively coupled plasma-mass spectrometry (MC-ICP-MS). These reference materials of natural samples were chosen to span a considerable range in Li isotope ratios and cover several different matrices in order to provide a useful benchmark for future studies. Our new analytical technique achieves significantly higher precision and reproducibility (< ± O.3%o 2s) than previous methods, with the additional advantage of requiring very low sample masses of ca . 2 ng of Li.  相似文献   

Genetic significance of fluid inclusions in the CSA Cu–Pb–Zn deposit, Cobar, Australia     

Alan D. Giles  Brian Marshall   《Ore Geology Reviews》2004,24(3-4):241

CSA mine exploits a ‘Cobar-type’ Cu–Pb–Zn±Au±Ag deposit within a cleaved and metamorphosed portion of the Cobar Supergroup, central New South Wales. The deposit comprises systems of ‘lenses’ that encompass veins, disseminations and semi-massive to massive Cu–Pb–Zn ores. The systems and contained lenses truncate bedding, are approximately coplanar with regional cleavage and similarly oriented shear zones and plunge parallel to the elongation lineation. Systems have extreme vertical continuity (>1000 m), short strike length (400 m) and narrow width (100 m), exhibit vertical and lateral ore-type variation and have alteration haloes. Models of ore formation include classical hydrothermalism, structurally controlled remobilisation and polymodal concepts; syntectonic emplacement now holds sway.Fluid inclusions were examined from quartz±sulphide veins adjacent to now-extracted ore, from coexisting quartz–sulphide within ore, and from vughs in barren quartz veins. Lack of early primary inclusions precluded direct determination of fluids associated with D₂–D₃ ore and vein emplacement. Similarly, decrepitation (by near-isobaric heating) of the two oldest secondary populations precluded direct determination of fluid phases immediately following D₂–D₃ ore and vein emplacement. Post-decrepitation outflow (late D₃ to early post-D₃) is recorded by monophase CH₄ inclusions. Entrained outflow of deeply circulated meteoric fluid modified the CH₄ system; modification is recorded by H₂O+CH₄ and H₂O+(trace CH₄) secondary populations and by an H₂O+(trace CH₄) primary population. The contractional tectonics (D₂–D₃) of ore emplacement was superseded by relaxational tectonics (D_4P) that facilitated meteoric water penetration and return flow.Under D₂ prograde metamorphism, entrapment temperatures (Tt) and pressures (Pt) for pre-decrepitation secondary inclusions are estimated as Tt300–330 °C and Pt1.5–2 kbar≈Plith (the lithostatic pressure). Decrepitation accompanied peak metamorphism (T350–380 °C) in mid- to late-D₃, while in late-D₃ to early post-D₃, essentially monophase CH₄ secondary inclusions were entrapped at Tt350 °C and Pt=1.5–2 kbar≈Plith. Subsequently, abundant CH₄ and entrained meteoric water were entrapped as H₂O+CH₄ secondaries under slowly decreasing temperature (Tt330–350 °C) and constant pressure (Pt1.5–2 kbar). Finally, with increasingly dominant meteoric outflow, H₂O+(trace CH₄) populations record decreasing temperatures (Tt>300 to <350 down to 275–300 °C) at pressures of Phydrostatic<Pt (1 kbar) <Plith (1.5 kbar).The populations of inclusions provide insight into fluid types, flow regimes and P–T conditions during parts of the deposit's evolution. They indirectly support the role of basin-derived CH₄ fluids in ore formation, but provide no insight into a basement-sourced ore-forming fluid. They fully support post-ore involvement of meteoric water. The poorly constrained entrapment history is believed to span 10 Ma from 395 to 385 Ma.  相似文献   

四川某矿山边坡失稳机理及稳定性评价   总被引：1，自引：1，他引：1  

胡卸文  吕小平  李廷强 《山地学报》2004,22(2):224-229

四川某矿山开采边坡迄今已有30余年,随采区规模的逐渐扩大,在矿区南坡构成一典型的顺层开挖边坡,因矿层中夹有不同数量的软弱夹层,在边坡前缘破坏坡角、并加上降雨及爆破振动影响,时常发生颁层滑坡,不仅给矿山人民生命财产带来严重危害,而且也严重制约矿山的正常发展。通过对典型开挖边坡所在部位的工程地质条件凋查,在确定影响边坡稳定的主要控制因素和边界条件的基础上。考虑四种工况条件下的稳定性分析和评价,为矿山下一步施工提出了较为合理的开挖方案。  相似文献   

大功率激电测深法寻找焦家式深部金矿床的试验应用研究     

牛如宝  陈长峰  宋海平  王友芳  王轮吉 《应用地球物理》2005,2(1):51-55

利用大功率的激电测深法可以寻找焦家式深部金 矿。首先,由物理和数学推导建立多层极化体的数 理模型,其数理模型产生的极化场可由多层若干 个极化单元场相叠加而成。由多次去除极化单元 场的原理而导出大功率激电测深资料进行消除浅 部强激电干扰异常的数据处理公式,从而突出了 深部矿床的激电异常。并利用处理后的激电测深 曲线,定量求取了深部金矿蚀变矿化带的顶界面 埋深。  相似文献   

The Quantitative Identification of Regional Mine and Natural Earthquakes and Its Application     

Liu Xiqiang 《中国地震研究》2005,19(3):269-281

INTRODUCTIONThe structural mine earthquake in coal mines refers to the quake induced by excavationengineeringthatleadstorupturingor change of geological structure and weakness surfaceintheinteriorof rock mass.According to the origin,mine earthquakes can b…  相似文献   

吉林海沟金矿矿山地质环境及其恢复治理方法   总被引：1，自引：0，他引：1  

孙春  赵洪满  程明华 《吉林地质》2005,24(3):61-65

在对海沟金矿矿山地质环境调查基础上，针对矿区存在着的问题，提出了治理与防范措施，对同类矿山有借鉴作用。  相似文献