A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK     

JENNY E. MORRIS  GARY J. HAMPSON  HOWARD D. JOHNSON 《Sedimentology》2006,53(6):1229-1263

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.  相似文献   

Engineering geological studies and tunnel support design at Sulakyurt dam site, Turkey   总被引：2，自引：0，他引：2  

H. Basarir 《Engineering Geology》2006,86(4):225-237

This paper presents the results of engineering geological investigations and tunnel support design studies, carried out at the Sulakyurt dam site, northeast of Ankara, Turkey. The Sulakyurt dam will be used for flow control and water storage for irrigation projects. Studies were carried out both in the field and the laboratory. Field studies include engineering geological mapping, intensive discontinuity surveying, core drilling and sampling for laboratory testing. The diversion tunnel will be driven in rock mass, consisting of granite and diorite. Empirical, analytical and numerical methods were combined for safe tunnel design. Rock mass rating (RMR), Rock mass quality (Q) and Geological strength index (GSI) systems were used for empirical rock mass quality determination, site characterization and support design. The convergence–confinement method was used as analytical method and software called Phase², a 2D finite element program, was utilized as numerical method. According to the results acquired from the empirical, analytical and numerical methods, tunnel stability problems were expected in both granite and diorite rock masses. The support system, suggested by empirical methods, was applied and the performance of suggested support system was evaluated by means of numerical modelling. It was concluded that the suggested support systems were adequate, since after applying the suggested support system to granite and diorite, tunnel deformation and the yielded elements around the tunnel decreased significantly. Thus, it is suggested that for more reliable support design empirical, numerical and analytical methods should be combined.  相似文献   

Crustal structure of the Eastern Alps along the TRANSALP profile from wide-angle seismic tomography   总被引：1，自引：1，他引：1  

Florian Bleibinhaus  Helmut Gebrande 《Tectonophysics》2006,414(1-4):51

The objective of the TRANSALP project is an investigation of the Eastern Alps with regard to their deep structure and dynamic evolution. The core of the project is a 340-km-long seismic profile at 12°E between Munich and Venice. This paper deals with the P-wave velocity distribution as derived from active source travel time tomography. Our database consists of Vibroseis and explosion seismic travel times recorded at up to 100 seismological stations distributed in a 30-km-wide corridor along the profile. In order to derive a velocity and reflector model, we simultaneously inverted refractions and reflections using a derivative of a damped least squares approach for local earthquake tomography. 8000 travel time picks from dense Vibroseis recordings provide the basis for high resolution in the upper crust. Explosion seismic wide-angle reflection travel times constrain both deeper crustal velocities and structure of the crust–mantle boundary with low resolution. In the resulting model, the Adriatic crust shows significantly higher P-wave velocities than the European crust. The European Moho is dipping south at an angle of 7°. The Adriatic Moho dips north with a gentle inclination at shallower depths. This geometry suggests S-directed subduction. Azimuthal variations of the first-break velocities as well as observations of shear wave splitting reveal strong anisotropy in the Tauern Window. We explain this finding by foliations and laminations generated by lateral extrusion. Based on the P-wave model we also localized almost 100 local earthquakes recorded during the 2-month acquisition campaign in 1999. Seismicity patterns in the North seem related to the Inn valley shear zone, and to thrusting of Austroalpine units over European basement. The alignment of deep seismicity in the Trento-Vicenza region with the top of the Adriatic lower crust corroborates the suggestion of a deep thrust fault in the Southern Alps.  相似文献   

Aftershocks series monitoring of the September 18, 2004 M = 4.6 earthquake at the western Pyrenees: A case of reservoir-triggered seismicity?     

M. Ruiz  O. Gasp  J. Gallart  J. Díaz  J.A. Pulgar  J. García-Sansegundo  C. Lpez-Fernndez  J.M. Gonzlez-Cortina 《Tectonophysics》2006,424(3-4):223

On September 18, 2004, a 4.6 mbLg earthquake was widely felt in the region around Pamplona, at the western Pyrenees. Preliminary locations reported an epicenter less than 20 km ESE of Pamplona and close to the Itoiz reservoir, which started impounding in January 2004. The area apparently lacks of significant seismic activity in recent times. After the main shock, which was preceded by series of foreshocks reaching magnitudes of 3.3 mbLg, a dense temporal network of 13 seismic stations was deployed there to monitor the aftershocks series and to constrain the hypocentral pattern. Aftershock determinations obtained with a double-difference algorithm define a narrow epicentral zone of less than 10 km², ESE–WNW oriented. The events are mainly concentrated between 3 and 9 km depth. Focal solutions were computed for the main event and 12 aftershocks including the highest secondary one of 3.8 mbLg. They show mainly normal faulting with some strike-slip component and one of the nodal planes oriented NW–SE and dipping to the NE. Cross-correlation techniques applied to detect and associate events with similar waveforms, provided up to 33 families relating the 67% of the 326 relocated aftershocks. Families show event clusters grouped by periods and migrating from NW to SE. Interestingly, the narrow epicentral zone inferred here is located less than 4 km away from the 111-m high Itoiz dam. These hypocentral results, and the correlation observed between fluctuations of the reservoir water level and the seismic activity, favour the explanation of this foreshock–aftershock series as a rapid response case of reservoir-triggered seismicity, burst by the first impoundment of the Itoiz reservoir. The region is folded and affected by shallow dipping thrusts, and the Itoiz reservoir is located on the hangingwall of a low angle southward verging thrust, which might be a case sensible to water level fluctuations. However, continued seismic monitoring in the coming years is mandatory in this area to infer more reliable seismotectonic and hazard assessments.  相似文献   

A comparative error analysis of manual versus automated methods of data acquisition for algebraic strain estimation   总被引：1，自引：0，他引：1  

Kingshuk Roy Choudhury  Kieran Mulchrone   《Tectonophysics》2006,421(3-4):209-230

This paper presents a statistical analysis of the algebraic strain estimation algorithm of Shimamoto and Ikeda [Shimamoto, T., Ikeda, Y., 1976. A simple algebraic method for strain estimation from deformed eillipsoidal objects: 1. Basic theory. Tectonophysics 36, 315–337]. It is argued that the error in their strain estimation procedure can be quantified using an expected discrepancy measure. An analysis of this measure demonstrates that the error is inversely proportional to the number of clasts used. The paper also examines the role of measurement error, in particular that incurred under (i) a moment based and (ii) manual data acquisition methods. Detailed analysis of these two acquisition methods shows that in both cases, the effect of measurement error on the expected discrepancy is small relative to the effect of the sample size (number of objects). Given their relative speed advantage, this result favours the use of automated measurement methods even if they incur more measurement error on individual objects. Validation of these results is carried out by means of a simulation study, as well as by reference to studies appearing in previous literature. The results are also applied to obtain an upper bound on the error of strain estimation for various studies published in the literature on strain analysis.  相似文献   

Water temperature behaviour in the River Loire since 1976 and 1881     

Florentina Moatar  Joël Gailhard 《Comptes Rendus Geoscience》2006,338(5):319-328

Analysis of monthly mean river temperatures, recorded on an hourly basis in the middle reaches of the Loire since 1976, allows reconstruction by multiple linear regression of the annual, spring and summer water temperatures from equivalent information on air temperatures and river discharge. Since 1881, the average annual and summer temperatures of the Loire have risen by approximately 0.8?°C, this increase accelerating since the late 1980s due to the rise in air temperature and also to lower discharge rates. In addition, the thermal regime in the Orleans to Blois reach is considerably affected by the inflow of groundwater from the Calcaires de Beauce aquifer, as shown by the summer energy balance. To cite this article: F. Moatar, J. Gailhard, C. R. Geoscience 338 (2006).  相似文献   

Sur les anomalies structurales de l'anticlinal de l'oued Bahloul de Tunisie : héritage tectonique et plissement cisaillant de couverture     

Ahmed Saadi  Noureddine Boukadi  Ali Gaaya 《Comptes Rendus Geoscience》2006,338(9):650-657

The Oued Bahloul structure exists in the central Atlas of Tunisia. This structure is oriented N70 and it shows a very particular geometry characterized by: (i) an important disharmony between the northern and the southern flanks; (ii) a dissymmetry between the east and the west parts of the structure; (iii) several gaps and progressive unconformities present in the Cretaceous and Eocene series.Three major tectonic directions characterize this structure: (i) the N120 appears in the western part of the anticline; (ii) some north–south faults distinguish the oriental part; (iii) the strike fault, which is confirmed by seismic data, affects the central part of this anticline. To cite this article: A. Saadi et al., C. R. Geoscience 338 (2006).  相似文献   

自重湿陷性黄土地区桩基设计探讨          下载免费PDF全文

徐建红 《探矿工程》2006,33(9):7-8

根据自重湿陷性黄土的特点、《湿陷性黄土地区建筑规范》（GB50025—2004）和《建筑桩基技术规范》（JGJ94—94）中关于桩基设计的对比分析，通过自重湿陷性黄土场地工程实例分析计算，依据负摩擦产生的机理——中性点理论，论述了自重湿陷性黄土场地中桩基设计应考虑中性点，而不应全部计入负摩阻的观点。  相似文献   

均匀设计在室内大型注浆试验研究中的应用          下载免费PDF全文

杨坪  陈安 《探矿工程》2006,33(3):9-11

介绍了均匀设计试验方法的特点及优越性，利用试验点在试验范围内的均匀分布，能大大减少试验次数且获得较好的试验效果。将均匀设计方法引入到注浆试验研究中，并对试验进行了详细设计，实践表明，均匀设计试验法是一种有效、可靠的试验设计方法。  相似文献   

顶管施工中顶力与顶程关系及其影响因素分析     

向安田丁文其  朱合华 《探矿工程》2006,33(10):29-31,34

以上海某长距离急曲线顶管工程为例，通过现场实测4节管段顶进过程中的顶力，研究了顶力随顶程的变化规律，系统分析了顶进过程中顶力的主要影响因素，得到了一些有用的结论。  相似文献