降水预报的初始场最优化方法     

周成钧耿良国  李军伟 《沙漠与绿洲气象(新疆气象)》2005,28(3):9-11

利用一简单的湿度发展方程，尝试用非线性最优化方法讨论降水预报中的最优初值场的获得。试验结果表明，通过非线性最优化分析方法，可以找到一最优初始场，使得模式预报结果与实际观测场一致，这为将来在实际应用中如何改善更复杂模式的初始场，提高预报准确率提供了一个很有意义的思路。  相似文献   

Optimal design of passive energy dissipation systems based on H∞ and H2 performances     

J. N. Yang  S. Lin  J‐H. Kim  A. K. Agrawal 《地震工程与结构动力学》2002,31(4):921-936

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

Multi‐objective optimal design of FLC driven hybrid mass damper for seismically excited structures     

A. S. Ahlawat  A. Ramaswamy 《地震工程与结构动力学》2002,31(7):1459-1479

Structural vibration control using active or passive control strategy is a viable technology for enhancing structural functionality and safety against natural hazards such as strong earthquakes and high wind gusts. Both the active and passive control systems have their limitations. The passive control system has limited capability to control the structural response whereas the active control system depends on external power. The power requirement for active control of civil engineering structures is usually quite high. Thus, a hybrid control system is a viable solution to alleviate some of the limitations. In this paper a multi‐objective optimal design of a hybrid control system for seismically excited building structures has been proposed. A tuned mass damper (TMD) and an active mass driver (AMD) have been used as the passive and active control components of the hybrid control system, respectively. A fuzzy logic controller (FLC) has been used to drive the AMD as the FLC has inherent robustness and ability to handle the non‐linearities and uncertainties. The genetic algorithm has been used for the optimization of the control system. Peak acceleration and displacement responses non‐dimensionalized with respect to the uncontrolled peak acceleration and displacement responses, respectively, have been used as the two objectives of the multi‐objective optimization problem. The proposed design approach for an optimum hybrid mass damper (HMD) system, driven by FLC has been demonstrated with the help of a numerical example. It is shown that the optimum values of the design parameters of the hybrid control system can be determined without specifying the modes to be controlled. The proposed FLC driven HMD has been found to be very effective for vibration control of seismically excited buildings in comparison with the available results for the same example structure but with a different optimal absorber. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

洛带气田蓬莱镇气藏开发部署优化研究     

张箭 《矿物岩石》2002,22(4):83-86

气藏评价尚未结束之前，开发的早期部署工作非常困难。针对洛带气田蓬莱镇组气藏的开发部署工作，利用目前许多新方法对开发层系划分、采气规模、开发规划、合理配产和井网部署等进行了优化研究，对气藏开发提出了指导性意见，且对类似气藏也具有参考意义。  相似文献   

Combination of Dependent Realizations Within the Gradual Deformation Method     

Lin Y. Hu 《Mathematical Geology》2002,34(8):953-963

Gradual deformation is a parameterization method that reduces considerably the unknown parameter space of stochastic models. This method can be used in an iterative optimization procedure for constraining stochastic simulations to data that are complex, nonanalytical functions of the simulated variables. This method is based on the fact that linear combinations of multi-Gaussian random functions remain multi-Gaussian random functions. During the past few years, we developed the gradual deformation method by combining independent realizations. This paper investigates another alternative: the combination of dependent realizations. One of our motivations for combining dependent realizations was to improve the numerical stability of the gradual deformation method. Because of limitations both in the size of simulation grids and in the precision of simulation algorithms, numerical realizations of a stochastic model are never perfectly independent. It was shown that the accumulation of very small dependence between realizations might result in significant structural drift from the initial stochastic model. From the combination of random functions whose covariance and cross-covariance are proportional to each other, we derived a new formulation of the gradual deformation method that can explicitly take into account the numerical dependence between realizations. This new formulation allows us to reduce the structural deterioration during the iterative optimization. The problem of combining dependent realizations also arises when deforming conditional realizations of a stochastic model. As opposed to the combination of independent realizations, combining conditional realizations avoids the additional conditioning step during the optimization process. However, this procedure is limited to global deformations with fixed structural parameters.  相似文献   

Optimal placement of dampers and actuators based on stochastic approach     

Franklin Y. Cheng  Hongping Jiang  Xiaozhe Zhang Ph.D. Candidate 《地震工程与工程振动(英文版)》2002,1(2):237-249

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.  相似文献   

Nonlinear earthquake response analysis and energy calculation for seismic slit shear wall structures     

蒋欢军  吕西林 《地震工程与工程振动(英文版)》2002,1(2):227-237

Based on the concept of structural passive control, a new type of slit shear wall, with improved seismic performance when compared to an ordinary solid shear wall, was proposed by the authors in 1996. The idea has been verified by a series of pseudo-static and dynamic tests. In this paper a macro numerical model is developed for the wall element and the energy dissipation device. Then, nonlinear time history analysis is carried out for a 10-story slit shear wall model tested on a shaking table. Furthermore, the seismic input energy and the individual energy dissipated by the components are calculated by a method based on Newmark-β assumptions for this shear wall model, and the advantages of this shear wall are further demonstrated by the calculation results from the viewpoint of energy. Finally, according to the seismic damage criterion on the basis of plastic accumulative energy and maximum response, the optimal analysis is carried out to select design parameters for the energy dissipation device.  相似文献   

两种方法在地下水位估值中的应用   总被引：2，自引：0，他引：2  

李金荣  杨振放  李云峰  李金玲 《水文地质工程地质》2003,30(3):42-46

对于许多区域水资源问题,用数值方法进行潜水水流模拟时,需要给出每个节点上地下水位值。本文首先简单介绍了趋势面方法,然后着重阐述了泛克里格方法的基本原理及它们在地下水位估值中的应用,通过比较两种方法的计算结果可以得出泛克里格方法是进行地下水位估值的空间最优估计方法。  相似文献   

宜兴抽水蓄能电站试验洞的反分析研究   总被引：4，自引：2，他引：4  

杨林德  仇圣华  王悦照  丁文其  朱合华 《岩土力学》2003,(Z2)

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。  相似文献   

Adaptive Multiscale Permeability Estimation     

Alv-Arne Grimstad  Trond Mannseth  Geir Nævdal  Hege Urkedal 《Computational Geosciences》2003,7(1):1-25

With multiscale permeability estimation one does not select parameterization prior to the estimation. Instead, one performs a hierarchical search for the right parameterization while solving a sequence of estimation problems with an increasing parameterization dimension. In some previous works on the subject, the same refinement is applied all over the porous medium. This may lead to over-parameterization, and subsequently, to unrealistic permeability estimates and excessive computational work. With adaptive multiscale permeability estimation, the new parameterization at an arbitrary stage in the estimation sequence is such that new degrees of freedom are not necessarily introduced all over the porous medium. The aim is to introduce new degrees of freedom only where it is warranted by the data. In this paper, we introduce a novel adaptive multiscale estimation. The approach is used to estimate absolute permeability from two-phase pressure data in several numerical examples.  相似文献