赫章片区地热地质条件特征及勘查远景探讨          下载免费PDF全文

刘倩  袁来  张小强  郑懋荣 《贵州地质》2019,36(1):88-94

区域性北西向紫云-垭都深大断裂带斜贯县境,其上下盘次级构造,层间破碎带及挽近期构造发育,具有中低温地热资源有利地热地质条件;潜在地热资源丰富,具有开发价值热储层为第一热储单元和第二热储单元的白云岩,以混合热储构造类型为主,其次是层状带状热储构造类型。根据地热地质条件,结合已成井成果资料,预测了六个靶区。  相似文献   

三维交叉裂隙渗流传质特性数值模拟     

李博  黄嘉伦  钟振  邹良超 《岩土力学》2019,40(9):3670-3768

对交叉裂隙渗流传质特性的定量描述是研究整个裂隙网络渗透传质特性的基础。为真实模拟水流及溶质在三维交叉裂隙中的运移过程,首先通过三维轮廓仪获取天然岩石裂隙表面的形貌数据,再应用三维重构技术生成相应的三维交叉裂隙模型,随后求解Navier-Stokes方程,假定溶质运移满足Fick定律,模拟水流和溶质在三维交叉裂隙中的运移过程。通过对比粗糙裂隙模型与平行平板模型的模拟结果发现：粗糙度对流体的分布及流动状态存在显著的影响;不同进、出口工况下的流体流动及溶质运移状态亦表明：裂隙交叉的几何形貌会显著地影响溶质混合行为。这些结果表明,目前被广泛采用的平行平板模型在评估岩体内特别是交叉口的物质运移特性时将导致较大的偏差,在将来的研究中有必要针对裂隙交叉口的几何特征建立修正的模型以提高评估的准确性。  相似文献   

基于探地雷达属性分析的典型岩溶不良地质识别方法     

刘宗辉  刘毛毛  周东  蓝日彦  吴恒  王业田 《岩土力学》2019,(8):3282-3290

采用探地雷达进行岩溶隧道超前地质预报时,受现场探测环境、岩溶地质的复杂性以及解译技术制约,多解性问题一直未能得到很好解决。从依托工程中选取代表性的案例,分析总结隧道建设中常见的几种典型岩溶不良地质的属性特征,结果表明岩溶不良地质类型与探地雷达属性参数有很好相关性,其中:空腔型溶洞、干燥松散黏土夹碎石充填型溶洞和无水破碎带雷达反射波中心频率随时间衰减较慢,分布范围分别为90~105、85~100、70~110MHz;软塑状黏土充填型溶洞和富水破碎带雷达反射波中心频率随时间衰减较快,分布范围分别为60~80MHz和40~70MHz。研究属性特征定量表示方法,提出基于广义S变换及子波谱模拟的雷达波吸收衰减参数计算方法。实际数据分析结果表明:每种属性都能从某些角度反映岩溶不良地质体雷达反射波的特征,在综合多个特征参数后,可以较好地区分不同的岩溶不良地质类型,从而提高探地雷达目标识别精度。  相似文献   

基于流体体积法的劈裂注浆有限元分析     

朱旻  龚晓南  高翔  刘世明  严佳佳 《岩土力学》2019,40(11):4523-4532

劈裂注浆作为一种有效的土体加固方法,其理论研究落后于工程实践。提出了基于弥散裂缝模型和流体体积法的劈裂注浆有限元分析方法,并通过ABAQUS二次开发编写劈裂注浆有限元程序。数值分析结果能与室内试验较好吻合,验证了有限元算法的合理性。在此基础上研究了注浆孔埋深和注浆流量对劈裂浆脉形状的影响。结果表明,劈裂注浆过程可分为起劈和劈裂发展两个阶段。当劈裂浆脉扩展到模型边界后,继续注浆会引起注浆压力的大幅提高和已有浆脉宽度的增加。随着注浆孔埋深的增加,浆脉分支减少,长度减小,宽度增加,劈裂浆脉形状的主要控制因素从土体参数的随机性变成大小主应力值的差异。注浆量一定的情况下,注浆速率越大,劈裂浆脉长度越短,宽度越大,注浆终压也越大。研究为劈裂注浆的工程应用提供理论支撑。  相似文献   

不整合体结构特征研究: 以永1井区侏罗系-白垩系不整合为例     

官伟  徐怀民  李涵  程磊  马永辉 《现代地质》2019,33(2):401-411

永1井区位于准噶尔盆地腹部昌吉凹陷,中晚侏罗世受燕山运动的影响在盆地腹部形成车莫隆起带,使得下伏西山窑组地层受到超覆、削蚀,形成了一系列岩性、地层及复合油气藏。在油气运聚成藏过程中不整合体的结构发挥了重要作用,故对不整合结构进行了三级层次划分:一级为盖层和不整合体层;二级将不整合体层分为上覆层、不整合层及下伏层;三级是成藏要素级,包括运聚层、隔挡层、风化黏土层和风化淋滤带。借助测井资料,运用岩性、物性、岩石学特征等分析不整合体纵向结构,研究区不整合体三级结构发育完整。地震资料结合测井资料,通过自然伽马反演明确不整合体结构层中运聚层和隔挡层的展布。风化淋滤带厚度自高部位向凹陷方向逐渐减薄,风化黏土层反之,二者具有较好的负相关性。不整合体的结构控制了本区最重要的两类储盖组合,分别是不整合体上覆层-不整合体盖层的储盖组合及不整合体下伏层-风化黏土层的储盖组合。  相似文献   

叠前同时反演技术在珠江口盆地西部海域天然气水合物储层预测中的应用     

沙志彬  万晓明  赵忠泉  梁金强  杨瑞召  白钰  柴祎 《物探与化探》2019,(3):476-485

珠江口盆地西部海域发育弱BSR或无BSR的天然气水合物储层,常规叠后反演所获得的参数单一,难以精确预测其天然气水合物分布特征。本文在地震道集优化处理、精细速度分析、岩石物理分析及低频模型精确建立的基础上,针对性地采用叠前同时反演技术,对珠江口盆地西部海域天然气水合物储层进行预测,并利用岩相流体概率分析技术对其进行综合识别,实现了对天然气水合物储层地精细刻画。反演预测结果表明,研究区天然气水合物较为发育,预测结果与钻探结果吻合程度较高,应用效果良好。  相似文献   

Geochemistry,Paleoenvironment and Mechanism of Organic-Matter Enrichment in the Lower Silurian Longmaxi Formation Shale in the Sichuan Basin,China     

CHEN Zhipeng  CUI Junping  REN Zhanli  JIANG Shu  LIANG Xing  WANG Gaocheng  ZOU Chen 《《地质学报》英文版》2019,93(3):505-519

To investigate the mechanism of the organic-matter enrichment in the Lower Longmaxi Formation shale, the geochemistry and total organic carbon(TOC) of the Longmaxi Formation black shales in the Jiaoshiba, Zhaotong, and Weiyuan areas of the Sichuan Basin were analyzed. Paleoproductivity proxy parameters(Babio, Siex, and Ni/Al), clastic influx proxies(TiO_2 and Ti/Al), redox indices(V/Cr, Ni/Co, V/(V+Ni), and U/Th), and hydrothermal indicators(Fe, Mn,and Y concentrations; Fe/Ti ratio and a Ni-Zn-Co diagram) were employed to decipher the paleoenvironment of the Lower Longmaxi Formation shales. TiO_2 and Ti/Al indicated low terrigenous detrital influx in all three areas. However, Babio, Siex,and Ni/Al indicated high productivity in the Jiaoshiba area. V/Cr, Ni/Co, and U/Th indicated higher oxygen content with larger fluctuations in the Zhaotong and Weiyuan areas. Fe, Mn, and Y concentrations and the Fe/Ti ratio implied greater active hydrothermal activity in the Weiyuan area. These heterogeneities were considered to be closely related to the paleoenvironment and paleogeography, and the large basement faults that developed during the Chuanzhong paleo-uplift could have provided vents for deep-hydrothermal-fluid upwelling. The redox indices(V/Cr, Ni/Co, and U/Th) and a paleoproductivity proxy(Ni/Al) displayed a significant correlation with the TOC, suggesting that both excellent preservation conditions and high paleoproductivity were the controlling factors for the enrichment of organic matter in the Longmaxi Formation shale. There was no obvious correlation between the clastic influx proxy(Ti/Al) and the TOC due to the extremely low supply of terrigenous debris. The hydrothermal indicator(Fe/Ti) was negatively correlated with the TOC in the Weiyuan area, indicating that hydrothermal activity may have played a negative role in the accumulation of organic matter. This study suggests that the enrichment of organic matter in the Longmaxi Formation marine shale varied according to the paleogeography and sedimentary environment.  相似文献   

Fluid Characteristics and Evolution of the Zhawulong Granitic Pegmatite Lithium Deposit in the Ganzi‐Songpan Region,Southwestern China     

XIONG Xin  LI Jiankang  WANG Denghong  LI Shanping  LIN Hao 《《地质学报》英文版》2019,93(4):943-954

The Zhawulong granitic pegmatite lithium deposit is located in the Ganzi-Songpan orogenic belt. Fluid inclusions in spodumene and coexisting quartz were studied to understand the cooling path and evolution of fluid within albite–spodumene pegmatite. There are three distinguishable types of fluid inclusions: crystal-rich, CO2–NaCl–H2O, and NaCl–H2O. At more than 500°C and 350~480 MPa, crystal-rich fluid inclusions were captured during the pegmatitic magma-hydrothermal transition stage, characterized by a dense hydrous alkali borosilicate fluid with a carbonate component. Between 412°C and 278°C, CO2–NaCl–H2Ofluid inclusions developed in spodumene (I) and quartz (II) with a low salinity (3.3–11.9 wt%NaCl equivalent) and a high volatile content, which represent the boundary between the transition stage and the hydrothermal stage. The subsequentNaCl–H2Ofluid inclusions from the hydrothermal stage, between 189°C and 302°C, have a low salinity (1.1–13.9 wt%NaCl equivalent). The various types of fluid inclusions reveal the P–T conditions of pegmatite formation, which marks the transition process from magmatic to hydrothermal. The ore-forming fluids from the Zhawulong deposit have many of the same characteristics as those from the Jiajika lithium deposit. The ore-forming fluid provided not only materials for crystallization of rare metal minerals, such as spodumene and beryl, but also the ideal conditions forthe growth of ore minerals. Therefore, this area has favorable conditions for lithium enrichment and excellent prospecting potential.  相似文献   

Geological and Fluid Inclusion Constraints on Gold Deposition Processes of the Dayingezhuang Gold Deposit,Jiaodong Peninsula,China   总被引：1，自引：0，他引：1  

CHAI Peng  ZHANG Zhiyu  HOU Zengqian 《《地质学报》英文版》2019,93(4):955-971

The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.  相似文献   

云南荒田大型铅锌矿床的成因:流体包裹体和C- H- O- S- Pb同位素地球化学约束   总被引：1，自引：0，他引：1  

刘瑞麟  张宝林  武广  沈晓丽  刘军港 《地质学报》2019,93(3):674-700

荒田铅锌矿位于扬子板块西南缘,与华夏地块和三江地块相接,属峨眉山大火成岩省的南延部分,川-滇-黔铅锌银多金属成矿域的南部。矿体赋存于上二叠统峨眉山玄武岩底部与下二叠统茅口组接触面上及其附近的玄武质-灰质角砾岩层中。本文应用流体包裹体和C-H-O-S-Pb同位素地球化学研究手段,来探讨荒田铅锌矿的成因。流体包裹体分析表明,成矿流体性质具有阶段性演化特征,早期硫化物阶段(阶段Ⅰ)出现含子矿物包裹体、CO_2包裹体和H_2O包裹体的组合发育特征,均一温度介于245～320℃,平均为270℃;到中期硫化物阶段(阶段Ⅱ)和晚期硫化物阶段(阶段Ⅲ)则逐渐变为以H_2O包裹体为主要类型,均一温度分别介于180～250℃和100～210℃,平均为224℃和174℃。随着成矿作用的进行,成矿流体的均一温度和盐度均表现出从早阶段到晚阶段逐渐降低的趋势。显微激光拉曼光谱分析显示流体包裹体的液相成分主要为H_2O,气相成分为H_2O、CO_2、CH_4以及N_2。碳、氧同位素组成(δ~(13)C_(PDB)值介于-8.54‰～3.76‰,δ~(18)O_(SMOW)值介于8.57‰～24.22‰)在δ~(18)O-δ~(13)C图上分布于原生碳酸岩和海相碳酸盐岩之间,指示CO_2可能来自地幔、海相沉积碳酸盐岩溶解和沉积物中有机质的脱羟基作用。氢氧同位素组成(δD值介于-97.4‰～-71.4‰,δ~(18)O_水值介于-4.6‰～8.0‰)在δD-δ~(18)O图上落在岩浆水和大气降水的过渡带上,推测热液流体运移过程中与顺层下渗的大气降水流体混合,期间可能有海水的加入。矿石硫化物的δ~(34)S值介于-5.5‰～10.3‰,指示矿化剂硫具有多种来源,除了直接来自玄武岩外,还来自古海水硫酸盐和碳酸盐岩地层,硫酸盐通过热化学还原(TSR)过程发生还原作用。矿石硫化物铅的~(208)Pb/~(204)Pb、~(207)Pb/~(204)Pb和~(206)Pb/~(204)Pb比值分别为38.320～39.365、15.603～15.860和18.136～18.786,数据分布呈线性趋势,几乎所有点均落在地壳铅平均演化线以上,且位于峨眉山组玄武岩、碳酸盐岩地层和基底岩石的Pb同位素组成范围之内,说明成矿物质具有多源性,铅同位素在成矿之前存在均一化过程。结合成矿物质和成矿流体来源,以及区域成矿地球动力学背景,认为荒田铅锌矿属于密西西比河谷型(MVT)叠加岩浆热液改造型矿床。  相似文献