耐高温（230 ℃）饱和盐水钻井液技术研究          下载免费PDF全文

陶士先  张丽君  单文军 《探矿工程》2014,41(1):21-26

我国未来深部大陆科学钻探计划深度为13000 m,温度梯度按3．0℃/100 m计算,井底温度将达到390℃以上,钻井液将面临超高温高压环境,钻井液技术将面临严峻考验。为此,开展了超高温钻井液的预研究,利用抗盐粘土、抗高温降滤失剂、抗高温解絮凝剂、抗高温保护剂等,研制了可用于230℃高温环境的饱和盐水钻井液配方。室内评价试验表明,用该配方配制的耐高温钻井液经230℃、16 h高温滚动老化后,具有良好的流动性能,高温高压失水量（210℃、3．45 MPa）＜35 mL/30 min。  相似文献   

脉状铅锌（铜、银）多金属热液矿床研究进展   总被引：1，自引：0，他引：1  

贾敬伍  张洪瑞  胡茂德 《岩石矿物学杂志》2014,33(4):726-746

目前在矿床学分类研究中对沉积岩容贱金属矿床的命名和分类尚未统一,其中一类赋矿围岩为沉积岩、矿体受构造(断层、褶皱等)控制呈脉状产出的、成矿金属为铅锌铜银多金属的矿床成为缺失环节,缺少系统的归纳总结。但该类矿床是造山作用的产物,对其进行归纳综合分析,有助于了解造山作用中的矿质迁移和沉淀过程。本文将该类矿床资料收集,对其成矿特征、控矿构造、成矿流体、矿质来源等进行分析总结。研究表明,此类矿床与造山作用或造山带有着紧密的联系。成矿物质表现为多源性,包括基底围岩、岩浆来源以及幔源贡献。成矿流体具有岩浆流体、变质流体、盆地卤水等多种来源,部分矿床的成矿流体受大气水影响。该类型矿床与MVT铅锌矿床有相似之处,但在成矿环境、控矿因素、金属来源以及成矿流体来源等方面有较大差异。  相似文献   

含霞石翡翠的成因研究     

韩辰婧  王雅玫 《岩石矿物学杂志》2014,33(3):581-590

本文针对鲜有报道的含霞石翡翠,选择了若干具有代表性的样品进行了详细的岩相学、矿物化学、拉曼光谱和X射线粉晶衍射等方面的研究,并对其成因进行了深入探讨。本研究中的样品属于翡翠中的“飘蓝花”品种,为柱粒状结构,主要由硬玉、霞石、角闪石和少量的钡铝硅酸盐等组成。硬玉可分为两个世代,早期硬玉呈自形,发育规则的环带结构,反映了成岩流体的反复补给过程。早期自形的硬玉颗粒部分被后期细粒化的硬玉±角闪石取代,反映了后期流体事件的改造作用。根据产出和成分特征可将霞石分为两种：贫钾霞石和富钾霞石,其中贫钾霞石多沿自形的硬玉颗粒边界分布,而富钾霞石充填在自形的硬玉颗粒之间。根据结构特征可以推测,含霞石翡翠主要是从成岩流体中直接结晶形成的。矿物组成及其成分特征表明该成岩流体主要富集Na、Al、Si、K、Ba以及少量的Ca、Fe、Mg等元素,微量元素则相对富集LREE、HFSE和Sr等元素。结合样品中的矿物相关系和前人的研究结果,含霞石翡翠中硬玉的结晶压力和温度范围分别被限制在0.6～1.4GPa和300～450℃之间,其中霞石代表着母岩减压后流体活动的产物。  相似文献   

The Mandel–Cryer effect in chemoporoelasticity     

A. P. Bunger 《国际地质力学数值与分析法杂志》2010,34(14):1479-1511

Chemoporoelastic theory is an extension of classical Biot poroelasticity that accounts for coupling with the presence and the transport of ions in the pore fluid. The impact of this extra level of coupling can be both substantial and complex. This paper relies on the two variations of Mandel's classical problem, which has become a canonical illustration of the complexity that poromechanical coupling can bring to an otherwise straightforward system. To this end, solutions for a chemoporoelastic shale cylinder and a spherical shale ball are derived. These solutions are then used to demonstrate that chemoporoelastic coupling leads to a coupled pore pressure response that is not only non‐monotonic, as in Mandel's classical case, but also demonstrates the consequences of the semi‐permeable membrane‐like nature of the shale and of the problem's two diffusion‐related timescales. This paper concludes with a discussion of the implications of these results for experimentation and modeling of so‐called reactive shales using chemoporoelastic theory. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Baroclinic nonlinear exchanges of energy and potential enstrophy in the quasi-geostrophic two-layer model     

Hal G. Marshall  Tsing-Chang Chen 《地球物理与天体物理流体动力学》2013,107(1-2):71-84

Abstract

Merilees and Warn's (1975) nonlinear interaction analysis of two-dimensional nondivergent flow is extended to examine the quasi-geostrophic two-layer model. Two sets of triads exist in this model (Salmon, 1978). The purely barotropic triads are the same as the triads examined by Merilees and Warn. Baroclinic-barotropic triads are found to exchange more energy or potential enstrophy with smaller or larger scales depending on the scale of motion as compared with the internal Rossby deformation radius and the relative wavenumber position of baroclinic and barotropic components.  相似文献   

Fluid generation, vein formation and the degree of fluid–rock interaction during decompression of high-pressure terranes: the Schistes Lustrés, Alpine Corsica, France     

I. Cartwright  & I. S. Buick 《Journal of Metamorphic Geology》2000,18(6):607-624

Centimetre‐ to decimetre‐wide quartz+calcite veins in schistes lustrés from Alpine Corsica were formed during exhumation at 30–40 Ma following blueschist facies metamorphism. The δ¹⁸O and δ¹³C values of the veins overlap those of the host schistes lustrés, and the δ¹⁸O values of the veins are much higher than those of other rocks on Corsica. These data suggest that the vein‐forming fluids were derived from the schistes lustrés. Fluids were probably generated by reactions that broke down carpholite, lawsonite, chlorite and white mica at 300–350 °C during decompression between c. 1400 and 800 MPa. However, the δ¹⁸O values of the veins are locally several per mil higher than expected given those of their host rocks. The magnitude of oxygen isotope disequilibrium between the veins and the host rock is inversely proportional to the δ¹⁸O value of the host rock. Additionally, calcite in some schists is in isotopic equilibrium with calcite in adjacent veins, but not with the silicate fraction of the schists. Locally, the schists are calcite bearing only within 1–20 cm of the veins. The vein‐forming fluids may have been preferentially derived from calcite‐bearing, high‐δ¹⁸O rocks that are common within the schistes lustrés and that locally contain abundant (>15%) veins. If the fluids were unable to completely isotopically equilibrate with the rocks, due to relatively rapid flow at moderate temperatures or being confined to fractures, they could form veins with higher δ¹⁸O values than those of the surrounding rocks. Alteration of the host rocks was probably inhibited by isolation of the fluid in ‘quartz‐armoured’ veins. Overall, the veins represent a metre‐ to hectometre‐scale fluid‐flow system confined to within the schistes lustrés unit, with little input from external sources. This fluid‐flow system is one of several that operated in the western Alps during exhumation following high‐pressure metamorphism.  相似文献   

Self‐similar solution of a plane‐strain fracture driven by a power‐law fluid     

J. I. Adachi  E. Detournay 《国际地质力学数值与分析法杂志》2002,26(6):579-604

This paper analyses the problem of a hydraulically driven fracture, propagating in an impermeable, linear elastic medium. The fracture is driven by injection of an incompressible, viscous fluid with power‐law rheology and behaviour index n?0. The opening of the fracture and the internal fluid pressure are related through the elastic singular integral equation, and the flow of fluid inside the crack is modelled using the lubrication theory. Under the additional assumptions of negligible toughness and no lag between the fluid front and the crack tip, the problem is reduced to self‐similar form. A solution that describes the crack length evolution, the fracture opening, the net fluid pressure and the fluid flow rate inside the crack is presented. This self‐similar solution is obtained by expanding the fracture opening in a series of Gegenbauer polynomials, with the series coefficients calculated using a numerical minimization procedure. The influence of the fluid index n in the crack propagation is also analysed. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

右江盆地含油气成矿流体性质及其成藏-成矿作用   总被引：10，自引：5，他引：5  

顾雪祥  李葆华  徐仕海  付绍洪  董树义 《地学前缘》2007,14(5)

右江盆地含油气成矿流体是一种多组分、多相态的不混溶体系,成藏流体具低温(多为90～160℃)和低盐度(多小于6wt%NaCl)的特征,其主要组分是有机质、CO2和H2O;金矿成矿流体以中低温(多集中于150～250℃)和低盐度(0.4～6.7wt%NaCl)为特征,其主要组分为H2O和CO2,次为烃类有机组分。盆地内古油藏与金矿床在空间上密切共存,在成藏和成矿流体活动时限上基本一致,在成因上一脉相承,表明两者均为盆地有机成矿流体演化的产物。加里东晚期至印支中期,"盆-台相间"的沉积构造格局为成矿和成藏奠定了物质基础,盆地有机成矿流体的活动使油气和金属分别聚集形成油气藏和金属矿床。印支晚期至燕山早期,伴随褶皱造山作用的盆地流体活动使油气的原始分布格局发生改变,并造成了油气和金属矿床的空间分带。燕山中晚期强烈的构造抬升剥蚀,使油气藏和金属矿床遭受强烈的破坏与改造。  相似文献   

Geochronology, Geochemistry, Fluid Inclusion and C, O Isotope Compositions of Calcite Veins in the Paleogene of the Jiangling Basin, South China: Implications for Fluid Evolution and Brine Potash Mineralization     

YU Xiaocan  WANG Chunlian  LIU Chenglin  WANG Jiuyi  SHEN Lijian 《《地质学报》英文版》2023,97(2):513-525

Deep-seated potassium-rich brines were identified in the Jiangling Basin, South China. Although magmatic-hydrothermal sources have been proposed, the relationship between brine-type potash mineralization and volcanism remains unclear. In this study, U-Pb geochronology, geochemistry, fluid inclusion and C-O isotopic compositions of hydrothermal vein minerals in the Jiangling Basin are examined. Laser ablation U-Pb dating of calcite veins indicates that the ages are slightly younger than the formation age of the Balingshan basalt. Fluid inclusions in hydrothermal minerals show medium–low homogenization temperatures (160–220°C) and low salinities (0.14 to 4.9 wt% NaCl eqv.) and densities (0.882–0.944 g/cm3). The liquid compositions of fluid inclusions in calcite veins from sedimentary strata have higher contents of potassium, compared with those from basalt. The coupled negative δ13CPDB (?10.3‰ to ?8.0‰) and positive δ18OSMOW (17.4‰ to 20.7‰) values imply that calcite precipitation resulted from CO2 degassing of the basaltic magmatic fluids, as indicated by the gas composition of these inclusions in hydrothermal minerals. Rare earth element patterns indicate that water-rock interaction between hydrothermal fluids and sedimentary wall rocks contributed to the calcite precipitation in sedimentary strata. It is proposed that high-temperature water-rock interaction between magmatic fluids and sedimentary strata resulted in the potassium enrichment in fluids, interpreted as one of the sources of potassium-rich brines in the Jiangling Basin.  相似文献   

3D Modeling and Determination of Factors Responsible for Zinc-Lead Mineralization in the Mehdiabad Deposit, Central Iran, based on Statistical Analysis of Geochemical Data     

Zahra BONYADI 《《地质学报》英文版》2022,96(6):2040-2055

Although the Mehdiabad zinc-lead deposit is one of the most well-known deposits in the central Iran structural zone, the genesis of the deposit remains controversial. The host rock of the ore is a dolomitic limestone of the Lower Cretaceous Taft Formation. In the two main orebodies of the deposit, which includes the Black Hill and East Ridge ore zones, the oxide and sulfide ores are observed at the surface and at depth, respectively. The elements Zn, Fe, Mn and Mg are more abundant in the East Ridge ore zone (in both sulfide and oxide ores), with Ba, Pb, Ag and Cu being more abundant in the Black Hill oxide ore. Based on the distribution of elements and their correlation with each other in these ore zones, the elements are divided into three general groups, that of terrigenous elements, chemically-deposited elements and ore-forming (hydrothermally deposited) elements, a division that is supported by the results of factor analyses. The spatial distribution of elements is jointly affected by contact with host rocks, the boundary of oxide-sulfide ores and fault zones. The main factors governing the distribution of elements are the mechanical transfer of detrital sediments, chemical sedimentation, transfer by hydrothermal fluids, oxidation and surface dissolution, all of which affected the spatial distribution of elements. The ore-forming elements are mostly affected by hydrothermal fluids and oxidation. This study not only provides additional information about the genesis of the Mehdiabad deposit, but also could assist in the exploitation of ore and further exploration purposes. The results of this study can aid in the exploration and exploitation of the Mehdiabad deposit and similar deposits in the region.  相似文献